Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Does this model have a belt - Whirlpool Ultimate Care II LSQ9549L Top Load Washer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 714 Answers

There is no belt on that model, it has a motor coupling which breaks when the machine gets out of balance, cost about 20 bucks ,when you turn the machine on can you hear the motor run but no agitation or spinning? if so it has broken, it's only made of rubber and plastic ,designed to break to protect from other damage to unit! need parts? try REPAIRCLINIC.com

Posted on Jan 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I fix a NB1500 treadmill belt that is bowing in the middle? I've tried adjusting the tighteners on the back and cannot eliminate the bowing in the middle.


No, you need a new belt as it is stretched because that is where it gets pounded all the time. $50 to $100 depending on the quality you choose.

New Balance 1500 Treadmill Walking Belt 20 x 119 - Treadmill Doctor

https://www.treadmilldoctor.com/new-balance-walking-belt-1500
Replacement Walking Belt For The New Balance 1500 Treadmill. Belt size 20" X 119".

New Balance 1500 Treadmill Walking Belt - eBay

www.ebay.com > ... > Fitness Equipment & Gear > Other Fitness Equipment & Gear US$94.99 - ‎In stock
New Balance 1500 Treadmill Walking Belt in Sporting Goods, Fitness, Running & Yoga, Fitness Equipment & Gear, Other Fitness Equipment & Gear ' eBay.

Amazon.com : New Balance Treadmill Running Belt Model 1500 ...

https://www.amazon.com/Balance-Treadmill-Running-Belt-Model/.../B00H4QKAOO Rating: 5 - ‎1 review
This is a 1-ply Residential walking belt, some sellers will try to sell you a 2-ply belt (claiming better quality) for your treadmill, which is not recommended for ...

Amazon.com : Treadmill Doctor Newbalance Treadmill Running Belt ...

https://www.amazon.com/Newbalance-Treadmill-Running-Belt-Model/.../B008EYOF... Amazon.com : Treadmill Doctor Newbalance Treadmill Running Belt Model 1500 : Exercise Treadmill Belts : Sports & Outdoors.

NB1500 treadmill belt Google Search

Aug 14, 2017 | Exercise & Fitness

1 Answer

Need diagram of deck for 2006 super bronco model 6605


I DON'T HAVE IT ON HAND, BUT YOU CAN TYPE IN ON GOOGLE SEARCH "YOUR MODEL # DECK BELT DIAGRAM" TO FIND IT, BUT TO DO IT YOURSELF, JUST REMEMBER THAT BLADES MUST TURN COUNTERCLOCKWISE AND THAT GROOVED PULLEYS MUST FACE THE INSIDE OF BELT AND FLAT PULLEYS THE OUTSIDE OF FACE OF BELT, ALSO REMEMBER THAT SOME MODELS HAVE JUST ONE BELT (DRIVE AND DECK BELT) OR TWO BELTS (DRIVE BELT AND DECK BELT)

Jul 08, 2014 | Troy Bilt 175HP Manual 42" Riding Mower

1 Answer

Toyota yaris timing belt diagram 2007 model


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Feb 20, 2012 | 2007 Toyota Yaris

1 Answer

I need to know the belt size and part number for the 915037 1844 ariens zeroturn


Hi and welcome to FixYa, I am Kelly.

http://partsradar.arinet.com/scripts/EmpartISAPI.dll?MF&app=ariens&lang=EN&TF=Empartweb&loginID=ariensc&loginpwd=consumer

Make sure pop-ups are enabled... (No ads on site)

Enter this model number:
915037-000101

Then on the side of the page choose: (Scroll) Mower Deck, Belt Idlers and Blades

There are 5 belts listed! There is nothing that relates to a mower or deck serial number either.
You have to know the model numbr of the deck (see item 1 same link to cross ref your belt size)

035
Belt PN: 07241700 V belt (037) = 44 inch deck model 51519000 & 5159100
039
041 / 313
Belt PN: 07242900 V belt (501) = 44 inch Deck Model 51510400

Thanks for choosing FixYa.
Kelly

Sep 10, 2011 | Garden

1 Answer

What belt do I purchase for eureka whirlwind litespeed


Hello,

If you have the exact model Eureka that this repair was listed under, model 4388 then please find a link to the belt you need below. If you'd like to verify the model number, please check the back or the bottom of the vacuum for a sticker that also will contain the serial number, and look for the word Model Number. If you don't have the 4388, please just add a comment with the model you have and I'll be more then happy to verify these two models take the same belt, or give you a link to the belt that goes to your model if they are different.

Here's a link to the exact belt called for on the model 4388:
Eureka Extended Life Style U Belt, Part 61120

Here's step by step instructions on how to replace the belt:

How To Replace Brush Roll Belt
NOTE: Turn off the switch and unplug the electrical cord
before replacing belt. Belt pulleys can become
hot during normal use. To prevent injury, avoid
touching the motor pulley when checking the belt.


fa435ec.jpg
1. Lower handle to floor to change belt.
2. Loosen, but do not remove, two screws to release hood.
Lift hood to remove.


8f6c19a.jpg
3. Lift left end of brush roll.
4. Remove and discard belt.


a4f21e8.jpg
5. Place new belt around motor pulley.


bce371a.jpg
6. Place belt around brush roll pulley.
7. Align left end cap with square in base. Push
end cap into place; see left side view.


128701f.jpg
8. Pull right side of brush roll to stretch belt.
Secure right end cap into base.


45ae0ad.jpg
9. Rotate brush roll to seat belt.
10. Replace the hood. Make sure hood front is
behind furniture guard. Hood should seat
onto self-locating screw tabs.
11. Tighten screws.


I hope this information was helpful to you in changing the belt. If you have any questions about how to change this belt, please just add a comment here on the repair page of Fixya, and I'll be happy to answer any follow up questions you might have. If you found this helpful, please be so kind and rate my repair helpful and / or leave feedback for me.

Thanks so much,

Chris Jones
GoVacuum.com

Apr 21, 2010 | Eureka Whirlwind 4388 Bagless Upright...

1 Answer

What Model replacement belt do I need for the Eureka model 2961 BVZ?


Greetings,

According to the Eureka Part diagram for your particular model vacuum, your vacuum uses Eureka Style U Belts. Eureka makes actually 2 different styles of U belts.

The first style is the standard U belt, Eureka part number 54312. This belt is probably the one that came standard on your model. You may purchase this belt from the link below;
http://eurekaservice.stores.yahoo.net/uprightbelt.html

The other type of Style U belt that will fit your model is the Eureka Extended Life Style U Belt, Part 61120B. The Extended U belt is more durable, and lasts longer then the Eureka Standard U belt. You may purchase the Extended U belt here;
http://eurekaservice.stores.yahoo.net/exlifubel.html

Now, if you are quite sure how to change your belt, you may visit the link below to see the owners manual for your Eureka 2961BVZ that will give you step by step instructions on how to change the belt;

http://eureka.com/service/manuals/80244.pdf

I really hope that this was helpful to you in finding and fixing the belt for your Eureka. If you did find this helpful, please be kind and rate my repair solution as helpful by clicking the thumbs up icon in the lower right hand corner below. I really do appreciate it, thank you.

Feel free to request a repair clarification if you have any questions about the procedure of installing the belt on your Eureka, I'll be happy to help.

Chris J.

Mar 12, 2010 | Eureka 2961AVZ Bagless Upright Vacuum

1 Answer

How do I replace the belt on my eurika vacuum it is a boss model.


Did you say that you have a Eureka? Also you need to know the model number because belt changing methods and belt sizes vary depending on the model. You can find the model number on the vacuum and can find the belt you need in the manual. Then you can get any Eureka belt here:

http://vacbelts.com/index.htm

Oct 28, 2009 | Emerson Vacuums

3 Answers

Self propulsion doesn't work on my upright. Vacuum works fine otherwise


You will need to look @ your owners manual to see where the self propell belt is located i am sure yours is broke and need to replace,- it will not be hard to replace-Lance

Oct 21, 2009 | Hoover Vacuums

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...