Question about Sony Cyber-shot DSC-M2 Digital Camera

1 Answer

When I turn my camera on, the screen remains black and says turn power off and on. Upon doing so, when i turn it on again, it begins beeping and says turn power off and on. But if I go to the view pictures screen and back to the "take" picture screen the screen just stays black and says turn power off and on

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 455 Answers

Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, press the RESET button located above the PHOTO button which will change all settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa

Posted on May 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. I Inherited a DELL Poweredge 1600SC server. When I switch it on, it powers up but the screen remains blank [black without any beeps]?? I remove all the memory and switched it back on again = NO beeps....


I guess you can't go into start button. /anyway how did you know if computing is powered? On your keyboard top line keys have screen control keys for brightness etc.eg f4. try.

Aug 01, 2013 | Dell PowerEdge 1600SC Server

1 Answer

It put access than after it starts beeping and appears turn the power off and on again


Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the SET UP1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa.

Dec 12, 2010 | Sony Cyber-shot DSC-W35 Digital Camera

1 Answer

Monitor screen stays black even though it's on


Remove the memory from your unit - power it up it should beep if full communication is still happening across your m/board. No beeps you board has died. if it beeps and your using two diffent memory modules just fitt one leave the battery out and power it up = if no display pull power swap out the memory and try again. if display occurrs you have a defective memory module - throw that failed unit away

glenn

Mar 07, 2009 | Compaq Computers & Internet

1 Answer

Black screen


Hi,

Turn the power off and on again message is displayed when the Lens mechanism is stuck or when there is an internal malfunction. To resolve the issue, try turning off and on the power for few times. If the issue persists, try power resetting the Camera.
To power reset the Camera, remove the battery from the Camera. Press and hold the power button of the Camera for 30 seconds. Remain the Camera without power for 60 seconds and reinsert the battery to check the operation.
You can also try Initializing the Camera by selecting the INITIALIZE option from the SETUP1 Menu of the Camera.
If the issue persists, service may be required.

Thanks for using FixYa

Nov 24, 2008 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

ACER ASPIRE T180


1. Remove the memory and put it back in again.
2. Remove the video card and put it back in again.

Check those two items first. Usually a beeping at the beginning would indicate either a memory or video problem, depending on the type of beep and computer.

Thanks and please don't forget to rate as fixya. Thank you.

Jul 17, 2008 | Acer Aspire™ T180 PC Desktop

1 Answer

Problem with camara


Lens isn't working and need to be replaced.

Jun 07, 2008 | Cameras

3 Answers

Problem with lens


It is possible you have the display turned off... Some cameras allow you to do this to save battery.

Feb 22, 2008 | Nikon COOLPIX S5 Digital Camera

2 Answers

Problems with Sony Cyber- Shot DSC-P73/P93 digital camera


Had similar problems with a DSC-P93 and found av clue to a solution on the internet: Change to new batteries, the original Sony Ni-Mh 2100 mAh seems to have gone really bad!

//Mats A

Oct 06, 2007 | Sony Cyber-Shot DSC-P73 Digital Camera

Not finding what you are looking for?
Sony Cyber-shot DSC-M2 Digital Camera Logo

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

kakima

Level 3 Expert

102366 Answers

james laughton
james laughton

Level 3 Expert

2166 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

22095 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...