Question about JVC Cybercam GR-DVL920 Mini DV Digital Camcorder

2 Answers

No power My camera won't turn on. I've tried with the adabter and I've left the camera to charge the battery for many hours and still it won't turn on.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Is the camera looks like a dead-set?

Posted on Feb 18, 2008

  • micromaster
    micromaster Feb 18, 2008

    If the unit is completly dead check/resolder plug in to dc/dc. Also check for bad ic links. Loading is often connectors on bottom board need resoldered. Order replacement caps from digikey they are about one tenth the price.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 689 Answers

You may try to check the camera directly from AC adaptor without battery. If possible check the AC adaptor if its providing voltage?

Posted on Feb 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Camileo P10 charging problem


I had the same problem with the P10 not charging via USB, I purchased mine second hand so it came with no charger. I assumed it would charge by the USB cable but it did not, the red light flashes but doesn't charge. Luckily I have an external battery charger for a different camera i got some years ago that takes a similar battery , the P10 battery didn't fit properly so I had to place it at a 45 degree angle into the charger making sure the outer contacts were lined up properly and taped it into place. After an hour it was fully charged and the camera is working fine. The charger is a 4.2 volt charger. New external chargers can be picked up on ebay cheaply

Jul 04, 2012 | Toshiba Camileo P10 Flash Media Camcorder

2 Answers

Canon xha1 won't turn on and hdv light keeps blinking


Same Problem, same day, have you found any solution?, i stored the camera for abut 6 months following the Manual specifications, keeping the camera away from humidity, dust, even light and unmounted batteries, but it didn't turned on when i really needed it, I tried changing batteries, power source, i've already checked the lock/standby and the main dial, anyone help please!

Jun 17, 2011 | Canon XH A1 Mini DV Digital Camcorder

3 Answers

My Kodac Play Sport won't turn on. It won't charge either.


who bought this Kodak camera had the same problem!!!! i bought it.. then couple of months past..and would not turn on! I tried everything!! with my phone\'s charger it finally charged ..i let it charged for 3 hours then it still wouldn\'t turn on! :(



! never! buy this again!

Jun 02, 2011 | Kodak PlaySport HD

3 Answers

Reset button ?


Sometimes there is a reset button and sometimes you have to reset it through a menu. Of course, if it won't turn on, then you can't get to the menus.

May I ask, what is you Toshiba camcorder's model #?

Jul 31, 2010 | Toshiba Video Cameras

1 Answer

My canon fs 100 doesn't turn on


I took the camera to the representative and we started various tests such as:
Tried My battery in OTHER camera .... not working
Tried OTHER battery in MY camera .... works
Tried charging MY battery in OTHER Camera .... works
Tried MY battery in MY camera and charged .... worked
Bottom end is that my charger is not working although it heats when "charging".

Now i will look at the pins in the charger to see if they are working or not.

Whatever the case .... getting a new charger.

May 29, 2009 | Canon FS100 Flash Media Camcorder

1 Answer

DXG-301V Power won't stay on


laistrop,

The fact that your camera was not used for a year and assuming the batteries remained in the camera (uncharged?) after that long a period of time, it would be very likely the batteries have deteriorated and may need to be replaced. The first thing to try is charging the batteries if you have not already done so. Plug in the charger and allow at least 12 hours for the batteries to charge. If the camera still will not work, the original batteries have very likey lost their ability to hold a charge and will have to be replaced. To test this, without spending too much money, try inserting 4 Alkaline AA batteries in the camera (observe the battery polarity marked on the flip-top battery cover). If the camera works, you should replace the batteries with fresh NiMh rechargeable batteries and charge them before you attempt to use the camera. Allow at least 12 hours for the initial charge unless the battery manufacturer suggests otherwise. I would not recommend using any form of "rapid" or "quick" charge rechargeable battery. If you do, you will be paying extra for a convenience you will not use, unless you plan to use an external quick charger, since the camera is not equipped to support rapid battery charging.

Rega

Feb 17, 2009 | DXG Technology DXG DXG-301V Digital...

13 Answers

Flip video won't charge


If you look on the bottom of the camera there is a button that slides from a locked to an unlocked position. Slide it to unlocked and then slide down the back of the camera (the side with the lens) there is a removeable rechargeable battery pack. Remove it for a moment and then put it back in. Try plugging back into the USB port. This should work.

Jan 09, 2009 | Pure Digital Flip Video Ultra Camcorder

1 Answer

Camcoder not turning on


The battery current is weak, not holding a charge.

Try this before buying a new camera's battery:

Use AA, C or D Battery and connect them in series to equal the total camera's battery.

Example: Each battery is rated 1.5VDC

-(battery)+ -(battery)+ -(battery)+ -(battery)+ equal 6DVC

Lead connected to far left is -(Minus) and lead connected to far right is +(positive). Put those other ends to the camera, - to - and + to +.

If camera is working, now. Then buy a new battery

Hope they are helpful.

Alexander
atdlee@netzero.com

Dec 12, 2007 | JVC Everio GZ-MG21 Camcorder

2 Answers

Power cord and battery's support NO power to Video Camera


This incident happens often and damages the camcorder's power board. Replacing power board and some adjustment should resolved the problem. Your cost may run from $175-$225 in US for this model. Whenever you are transfering and connecting to pc, it is recommended to connect AC adapter power for this. Do not rely on a charged battery. Good luck.

Mar 17, 2007 | Canon Optura 50 Mini DV Digital Camcorder

Not finding what you are looking for?
JVC Cybercam GR-DVL920 Mini DV Digital Camcorder Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts

kakima

Level 3 Expert

98608 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...