Question about Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC

1 Answer

Error 2350.fdi server error during install of blackberry desktop manager help me please w/ a step by step on how to repair, without this. I'm currently unable to tether w/my blackberry as a modem. Cause I can not install with out an error Help me pleaseeeeeeeee & thank you in advance for your assistance, Sincerely. Hard up & desperate

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 42 Answers

I've personally encountered this issue when setting up new Blackberry devices for clients too many times to count. This issue has to do with the Blackberry Desktop Manager installer package being corrupted when being downloaded.

It does not seem to be a PC issue but an issue with the Blackberry website. The only work around is to download it until you get one that works. I have spent up to 10 times downloading it to get one to work.
It also seems to help to disable the Antivirus as some PCs with certain Antivirus suites seem to have more issues then others.

Make sure when you done load it to save it to the disk, then open it from the save file. Also when the installation is complete make sure to turn the Antivirus back on.

The Blackberry site is here at http://na.blackberry.com/eng/services/desktop/ and the Desktop Manager is here at https://www.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB068C22&dl=DA5FB46338C8C0DCB1039F7898184FC5

Posted on Feb 06, 2010

  • centaurette Nov 07, 2010

    What worked for me was to do this:
    Start - Run - Cmd - Ok

    type: msiexec /unregister Hit Enter
    type: msiexec /regserver Hit Enter

    Close out of it.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have JUM error 102 on my blackberry pearl phone and now it wont power up, is there a way to fix it without having to replace the whole phone?


Try to put a good battery,if it still not working flash it with desktop manager and a new blackberry firmware.

Mar 20, 2010 | RIM BlackBerry Pearl 8100

1 Answer

My phone says error 513


Hi, After typing the incorrect password ten times and restarting the BlackBerry smartphone, the error JVM 513 appears: This error occurs because all of the data and applications on the BlackBerry smartphone have been deleted. The BlackBerry Device Software must be reloaded on to the BlackBerry smartphone. To reload the BlackBerry Device Software you need the complete the following steps: Before proceeding, make sure that the latest version of BlackBerry Device Software is installed on the desktop computer by completing the following steps: To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.5 to 5.0, perform the following steps: Open BlackBerry Desktop Manager. Click Help. Select About Desktop Manager. Click the Device Software tab. Verify that the BlackBerry Device Software displayed is the latest version currently available from the wireless service provider. The following procedure will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the BlackBerry smartphone data before proceeding. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager. Double-click Application Loader. Click Next to start the installation process. Type your BlackBerry smartphone password, if prompted, and click OK. Select the check boxes next to the names of the applications to be loaded, and then click Next. Click Settings, and then select the check boxes beside Delete all application data and Erase all currently installed applications. Clear the check box next to Backup up device data automatically during the installation process. Click Ok > Next > Finish. When the process has completed, the message The loading operation was successful will appear. Click Close to return to BlackBerry Desktop Manager. To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.1 to 4.3, complete the steps 1-5 above and then proceed with the following: Click Advanced , and then select the check boxes beside Erase all application data and Erase all currently installed applications Click Next. Select the check box next to Do not automatically backup the application data during the loading process (if prompted). Clear the check box next to Backup and restore applications installed wirelessly (if prompted). Click Next > Finish. Hope I helped you. Thank you for using ' Fixya ' and have a nice day!!

Nov 27, 2009 | AT&T Blackberry Curve 8300 Smartphone

1 Answer

In my att blackberry it says error 507 how do yu fix that


To solve Error 507 You need to update/ReInstall the BlackBerry Operating System.
With error 507 appeared on display, during update sw ask device password,just type any password what you like 123456789..
how to reset blackberry password ?
Enter wrong password 10 times your device will deletes all your device data & reset user password
Note : If you type your BlackBerry® device password incorrectly , you might be prompted to type blackberry before you can continue.

you need to remove IT policy , here is the working solution how to remove IT policy tested by me many times


Go to your Options : Security >> Security Options (the same page where you can enable/disable passwords) & scroll to the bottom. If there's an IT policy attached, it will be mentioned there. Remove the IT policy using these instructions



Procedure
Step 1 : Ensure the Blackberry Desktop Manager is installed using Blackberry Internet Service, and not Blackberry Enterprise Server. If you are unsure, it would probably be a good idea to uninstall the Desktop Manager and start again. If you don't have the CD that came with your Blackberry, the Software can be downloaded here.

Step 2 : Download the file policy.bin and save it in your Blackberry installation directory (C:\Program Files\Research In Motion\BlackBerry).

Step 3 : Wipe your Blackberry, creating a backup if necessary. Select Options/Security/Wipe on the Device. If this option is unavailable, you may have to install the latest software on your Blackberry. You need to Download and install the latest OS for your device. Connect your device, open the Desktop Manager, select Application Loader, and follow the prompts.

Step 4 : Close the Desktop Manager if it is open.

Step 5 : From the Windows XP Start Menu select Run..., and at the prompt type regedit. In the tree on the left hand side, navigate to:

HKEY_Current_Users\Software\Research In Motion\BlackBerry\PolicyManager

Right-Click the Policy Manager Folder and select New/String Value. Name the value Path. Now, Double-Click the Path Subkey and set Value Data to:

C:\Program Files\Research In Motion\BlackBerry\policy.bin

Step 6 : Open the Desktop Manager.

Step 7 : Connect the Device. Verification Once complete, the Options/Security screen on your Blackberry should not contain references to an IT Policy, you should now be able to change all settings (including password prompts), and install Third Party Applications.

Nov 24, 2009 | Cell Phones

1 Answer

ITS JUST STUCK ON THE SCREEN I CANT DO ANYTHING MY BLACKBERRY CURVE 8310 IS STUCK WITH THE ERROR CODE JVM ERROR 102


Hi,

The BlackBerry smartphone stops responding, and the "JVM 102" error message is displayed:
JVM 102 error occurs when there is an issue with one or more of the .cod files installed on the BlackBerry smartphone.

To resolve this issue, perform a clean reload of the BlackBerry Device Software on the BlackBerry smartphone using the application loader tool.
Before proceeding, make sure that the latest version of BlackBerry Device Software is installed on the desktop computer by completing the following steps: To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.5 to 5.0, perform the following steps: Open BlackBerry Desktop Manager. Click Help. Select About Desktop Manager. Click the Device Software tab. Verify that the BlackBerry Device Software displayed is the latest version currently available from the wireless service provider. Warning: The following procedure will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the BlackBerry smartphone data before proceeding. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager. Double-click Application Loader. Click Next to start the installation process. Type your BlackBerry smartphone password, if prompted, and click OK. Select the check boxes next to the names of the applications to be loaded, and then click Next. Click Settings, and then select the check boxes beside Delete all application data and Erase all currently installed applications. Clear the check box next to Backup up device data automatically during the installation process. Click Ok > Next > Finish. When the process has completed, the message The loading operation was successful will appear. Click Close to return to BlackBerry Desktop Manager. To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.1 to 4.3, complete the steps 1-5 above and then proceed with the following: Click Advanced , and then select the check boxes beside Erase all application data and Erase all currently installed applications Click Next. Select the check box next to Do not automatically backup the application data during the loading process (if prompted). Clear the check box next to Backup and restore applications installed wirelessly (if prompted). Click Next > Finish.

I Hope it helped you.
Thank you for using ' Fixya ' and have a nice day!!

Nov 13, 2009 | RIM BlackBerry 7290

1 Answer

I have the jum error 102 reset - what do I do?


Hi, The BlackBerry smartphone stops responding, and the "JVM 102" error message is displayed: JVM 102 error occurs when there is an issue with one or more of the .cod files installed on the BlackBerry smartphone. To resolve this issue, perform a clean reload of the BlackBerry Device Software on the BlackBerry smartphone using the application loader tool. Before proceeding, make sure that the latest version of BlackBerry Device Software is installed on the desktop computer by completing the following steps: To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.5 to 5.0, perform the following steps: Open BlackBerry Desktop Manager. Click Help. Select About Desktop Manager. Click the Device Software tab. Verify that the BlackBerry Device Software displayed is the latest version currently available from the wireless service provider. Warning: The following procedure will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the BlackBerry smartphone data before proceeding. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager. Double-click Application Loader. Click Next to start the installation process. Type your BlackBerry smartphone password, if prompted, and click OK. Select the check boxes next to the names of the applications to be loaded, and then click Next. Click Settings, and then select the check boxes beside Delete all application data and Erase all currently installed applications. Clear the check box next to Backup up device data automatically during the installation process. Click Ok > Next > Finish. When the process has completed, the message The loading operation was successful will appear. Click Close to return to BlackBerry Desktop Manager. To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.1 to 4.3, complete the steps 1-5 above and then proceed with the following: Click Advanced , and then select the check boxes beside Erase all application data and Erase all currently installed applications Click Next. Select the check box next to Do not automatically backup the application data during the loading process (if prompted). Clear the check box next to Backup and restore applications installed wirelessly (if prompted). Click Next > Finish. I Hope it helped you. Thank you for using ' Fixya ' and have a nice day!!

Oct 12, 2009 | RIM BlackBerry Pearl 8100

1 Answer

So i messed up on my password threee times and now it says error 513 how do i fix it


Hi, After typing the incorrect password ten times and restarting the BlackBerry smartphone, the error JVM 513 appears: This error occurs because all of the data and applications on the BlackBerry smartphone have been deleted. The BlackBerry Device Software must be reloaded on to the BlackBerry smartphone. To reload the BlackBerry Device Software you need the complete the following steps: Before proceeding, make sure that the latest version of BlackBerry Device Software is installed on the desktop computer by completing the following steps: To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.5 to 5.0, perform the following steps: Open BlackBerry Desktop Manager. Click Help. Select About Desktop Manager. Click the Device Software tab. Verify that the BlackBerry Device Software displayed is the latest version currently available from the wireless service provider. The following procedure will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the BlackBerry smartphone data before proceeding. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager. Double-click Application Loader. Click Next to start the installation process. Type your BlackBerry smartphone password, if prompted, and click OK. Select the check boxes next to the names of the applications to be loaded, and then click Next. Click Settings, and then select the check boxes beside Delete all application data and Erase all currently installed applications. Clear the check box next to Backup up device data automatically during the installation process. Click Ok > Next > Finish. When the process has completed, the message The loading operation was successful will appear. Click Close to return to BlackBerry Desktop Manager. To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.1 to 4.3, complete the steps 1-5 above and then proceed with the following: Click Advanced , and then select the check boxes beside Erase all application data and Erase all currently installed applications Click Next. Select the check box next to Do not automatically backup the application data during the loading process (if prompted). Clear the check box next to Backup and restore applications installed wirelessly (if prompted). Click Next > Finish. Hope I helped you. Thank you for using ' Fixya ' and have a nice day!!

Oct 11, 2009 | RIM BlackBerry Pearl 8100

2 Answers

I need to fix my Jvm error 513 on my black berry


You will need to re-install the software on the device.
Here is the procedure to install the software.

Step #1
Before starting make sure that BlackBerry Desktop Software is installed on the computer.

Step#2
Make sure that you have installed updated device software installed in your PC. Check this link to get update device software from carrier OS download site.

Step#3

Users can perform a full or selective backup of the data using the Backup and Restore tool in BlackBerry Desktop Manager by completing the following steps:
  1. Connect the BlackBerry device to the computer running BlackBerry Desktop Manager.
  2. Open BlackBerry Desktop Manager.
  3. Double-click Backup and Restore.
  4. Select Backup to perform a full backup or select Advanced to perform a backup of specific databases.
  5. Choose a location to save the backup file, then click Save.
Step#4
To perform a clean install of the BlackBerry Device Software, perform the following steps:
  1. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
  2. Double-click the Application Loader icon.
  3. Click Next to start the installation process.
  4. Type your BlackBerry smartphone password, if prompted, and click OK.
  5. Click the check boxes next to the names of the applications you want to load, and then click Next.
  6. Click Advanced, and then click the check box beside Erase all currently installed applications.
  7. Click Next.
  8. Click the check box next to Do not automatically backup the application data during the loading process.
  9. Clear the box next to Backup and restore applications installed wirelessly.
  10. Click Next > Finish.
  11. When the process has completed, the message The loading operation was successful will appear. Click Close to return to BlackBerry Desktop Manager
Please rate this if it fixes your issue

Jun 05, 2009 | RIM BlackBerry Pearl 8100

1 Answer

When attempting to install Print Artist Version 22/ Platinum Edition, I received the following message: Error 2350. FDI Server Error I tried re-installing and received the same message.


If you are using Windows XP install

windows installer 3.1

http://www.microsoft.com/downloads/details.aspx?FamilyID=889482fc-5f56-4a38-b838-de776fd4138c&DisplayLang=en

XML Services 6.0

http://www.microsoft.com/downloads/details.aspx?familyid=993c0bcf-3bcf-4009-be21-27e85e1857b1&displaylang=en

and .NET framework 3.5

http://www.microsoft.com/downloads/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en

Jul 11, 2008 | Computers & Internet

1 Answer

Software installation on a inspiron 6000 laptop


Make sure you have Windows Installer 3.1, MS XML 6.0, and .NET Framework 2.0 installed, then try again.

Jun 06, 2008 | Computers & Internet

Not finding what you are looking for?
Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC Logo

4,289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...