Question about Cyberhome CH-DVD 300 DVD Player

1 Answer

Wont load any DVD'S

Hello i have a ch dvd 300 and when I put in any DVD orginal or burned the screen says loading and does nothing else. Is my DVD player dead

Posted by on

  • 1 more comment 
  • asj1 Feb 20, 2008

    I'm having the same problem, please help!!

  • Anonymous Feb 24, 2008

    I just purchased a cyberhome dvd player/recorder and found that the Loading message comes up but the door won't even open. I'm really frustrated! No more cyberhome products in my home.. Thank you.

  • freebe Mar 01, 2008

    won't play,the screen says play,I click on it,it starts to play then it turns dark,then blue screen.after a few seconds,it starts again,and does the same thing.this hapens all the time.i shut of the power at the plug,after a few seconds,i hook it back up and it does the same thing.can you help? the model i have is ch-dvd 300 zs1.any suggestions? Bill......

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 104 Answers

It is possible that the power supply is not providing a solid 5 volts.
Many of these units had problems where the 5v is too low (4.9).
In most cases capacitors can be replaced to correct a low voltage situation. Be sure to use 16v capacitors in place of any 10v.

Posted on Mar 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My CyberHome DVD 300 says "bad disk" every time I load a dvd.


pls check ur dvd player optial pickup lense.try to clean or replace.

Dec 28, 2009 | Cyberhome CH-DVD 300 DVD Player

1 Answer

When ever a disc is put into the ch300 I get a loading message


The laser lens could just be dirty, or it could be on it's last leg.
I'd recommend cleaning the laser first, laser replacement would cost more then the machine itself is worth.

Nov 20, 2009 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Won't load disc


Sounds like the lens is dirty and not reading disc take some rubbing alcohol and a q tip and clean lens the top side and bottom side (mirror side).

Nov 14, 2009 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Cds fine; dvds won't load


Most likely the DVD laser lens is dirty. Unplug the CH-DVD 300 from the wall outlet, wait 5 minutes, then remove the top cover. Next, remove the rectangular metal plate which covers the area where the CD or DVD disc would be when in the player's tray. Underneath the rectangular plate you should see two small lenses. Gently clean these lenses using ear swabs moistened with isopropyl alcohol. Reassemble the CH-DVD 300 in the reverse order that you disassembled it, plug it back into power, and now it should read your DVD discs just fine.

Aug 13, 2009 | Cyberhome CH-DVD 300 DVD Player

1 Answer

I cannot get my Cyberhome DVD to work


Hello

I have a cyberhome dvd player CH- DVD 300 had it for a 1 year i but in a orginal dvd movie and it does play it it said no disc I but in dvd cleaner it read for a moment but when i put in the orginal movie it said no disc again is it the sensor or what, what should i do???

Aug 18, 2008 | Cyberhome CH-DVD 300 DVD Player

2 Answers

Won't read/initialize CD's or DVD's.


Check for a dry capacitor on the power suply is about 16v 470mf you can identified him because the top are inflate.

Jul 01, 2008 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Can't play dvd


Maybe your dvd got some capacitors dried on the power supply.
But you can also clean the laser lens maybe is dirty.

Jun 21, 2008 | Cyberhome CH-DVD 300 DVD Player

2 Answers

Cyberhome 320 wont load discs


This dvd's fails because a dry capacitors on the alimentation source you need to send to a repair service center.

May 13, 2008 | Cyberhome CH-DVD 300 DVD Player

2 Answers

It does not want to load anything.


have you tried resetting it to factory defaults?

Jan 10, 2008 | Cyberhome CH-DVD 300 DVD Player

Not finding what you are looking for?
Cyberhome CH-DVD 300 DVD Player Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyberhome Televison & Video Experts

zappal

Level 1 Expert

49 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Cyberhome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...