Question about E-Machines eMachines Desktop PC

3 Answers

My emachines wont turn on

I have an emachines i bought back in 2003 and one day after doing the updates it just wont turn on what so ever..I took it to a friend whom knows about computers and he checked the power switch and the power to it and the fan and everything else and everything seems to be working with it but it just wont turn on..I would like to see if any one out there can help me out..He said it might be the mother board and it if is where could i find it..Please help asap....Write to me at mariana_franco_7@yahoo.com. thank you for your attention..

Yuri

Posted by on

  • 1 more comment 
  • dorothy1 Feb 18, 2008

    My computer beeps when I turn it on. I tried unplugging and plugging everything back on, but nothing seems to help. My monitor has power but nothing comes on the screen. When I unplug the cord leading into the cpu, I get a message on my monitor that it's looking for the video. Any suggestions?

  • DLP117 Feb 22, 2008

    I have the same problem with a T2891. I just installed a new power supply (Ever Power HPS-300-202). The old one was definitely fried.

    I push the button and get nothing. No power whatsoever.

  • Bellmae Feb 26, 2008

    My emachine runs, but I see nothing on the screen.

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

Also in addition to the above, try reseating the ram chips..take them out individually and plug them back into their respective slots..might be the miracle cure..If the motherboard fan turns on, it might just be bad memory..replace RAM chips

Posted on Mar 03, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Have you all seen how many e machine have the same problem or very similar problems !?!?

Surely if somehow we could all get together and complain to e~machines together, they would have to do something, right?? It looks to me as though the problems are a manufacturing fault or sloppiness, and that they should do something about it!!!

Posted on Apr 11, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 110 Answers

Emachines have famously bad power supplies, so I would suspect that first. It's also much easier (and cheaper) to replace the power supply than the motherboard, so I'd recommend starting there. I can refer you to a sub-$50 power supply that would work for you if you like.

Posted on Feb 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello...??.....I need help with my emachine T-6520


Go to this web link:
http://technet.microsoft.com/en-us/library/bb932139.aspx
Download the relevant file WindowsUpdateAgent30-x86.exe
Install the Windows Update Agent and then try the Windows update again.

Jan 19, 2014 | E-Machines eMachines Desktop PC

1 Answer

Automatic Computer Date/Time updating


YOU HAVE TO SET THE CORRECT TIME IN BIOS.
DAYS,HOURS AND SECONDS.

Jun 04, 2013 | E-Machines eMachines Desktop PC

1 Answer

Need my sound and dvd drivers back on my emachine , my god , i have two days work and too much money invested in this search , really , is there no one to help me get these drivers back without getting...


More info?
What type machine do you have may just need to go to the manufacturer website and download the driver and update them... eMachine does support and have downloads available

Jul 02, 2010 | PC Desktops

1 Answer

Cd/dvd wont play burn or anything /emachines el1200-05w


hi there.
have you check driver of the dvd room,on control panel click,click system,click hardware,click device manager,on device maneger click cd/dvd coom,then left click your cd room,click properties check driver,if no driver update,or if you have cd installer
install the driver.have a nice day

Jul 07, 2009 | E-Machines eMachines Desktop PC

1 Answer

MY PC WONT COME ON THE SCREEN IS BLACK


The mother board has a battery if thats the one you took out you reset the bios, Try pressing the delete simutanuosanly after turning on the computer then in the bios goto boot device priority and select your hard drive press f10 which is the save and exit. Try turning on your pc again and see if it boots off the hard drive make sure you give the computer time to re-boot itself after you change the setting in the bios.

Apr 08, 2009 | eMachines T3604 PC Desktop

8 Answers

Emachine restore back to factory settings


Hello,
I had to restore my Emachine. I have Windows Vista
(1) Go to start menu
(2) Click on all programs
(3) click on Emachine
(4) click on Emachine recovery management
(5) Click on restore on the bar across the top
(6) click on restore to system factory default

It takes about 20 mins.

Sep 07, 2008 | PC Desktops

1 Answer

Emachine


There may be many causes.

First, if you get any Beeps, recommend you to remove and reinsert the Memory(RAM) sticks.

Do try booting after removing the CMOS Battery(The one like a coin on the motherboard). Check the manual for instructions to remove the CMOS Battery.

Aug 11, 2008 | E-Machines eMachines Desktop PC

5 Answers

Dead motherboard on emachines t2984


I hope that you took it back to them.
Have them check the power supply, too. Besides, a bad power switch and connections that would be the only thing that would be keep it from starting.

Mar 12, 2008 | E-Machines eMachines Refurbished EMA...

1 Answer

No audio


k its simple right click on my computer-->properties>hard ware-->device manager-->and click on audio -->and right click on it and click on trouble shoot or repair it will automatically update the driver or click on upgrade driver>and apply or k>restat the pc>and it will works>and if its works rate me solved

Oct 18, 2007 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an E-Machines PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...