Question about Office Equipment & Supplies

1 Answer

My Canon i80 which has been working well for several years now says that the "waste ink" receptacle is almost full and it needs maintinance. Is this something I can do myself? Kate Palmer

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I learned that my printer does indeed need maintenance by a professional--and that I might break it if I tried to do it myself (not good news, but it was good advice)
I learned also the number and address for the nearest expert.
Thanks to Waqar.
Kate Palmer

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It falshes orange and it makes a raddling noise


Hi,

This error is cauded when there is a issue with the waste ink tank, which in your case will have to be resetted. To do the same please follow the steps as provided in the below article:

http://tricks-collections.com/waste-ink-tank-full-reset-canon-i80/

Also you can visit the cannon website and it tells you in detail the meaning/resolution when the orange light flashes:

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/i_series/i80#ServiceAndSupport

Fo to section "Services and support" and there in the dialog bos type "orange light flshes and it will give you steps to follow.

Please let me know if you need any further information.

Jul 21, 2010 | Canon i80 InkJet Printer

1 Answer

Mt printer does not work


You only need the drain pack assembly, #QL2-0194-000. Around $10.00. The worst part is you need Canon Diagnostics to reset the absorber count and turn off the error.

Jul 20, 2009 | Canon i80 InkJet Printer

1 Answer

Waste ink absorber is full contact service center message


waste absorber full reset sequence for the I80.
1)Turn off the printer. Press and hold the Resume/Cancel and Power buttons at the same time.
2)Release the Resume/Cancel button. (continue to hold down the power button)
3)While continuing to hold down the power button press the Resume/Cancel button 3 times then release both buttons.
4)The LED should now be green. Press the Resume/Cancel button 4 times. The led should be green.
5) Turn the printer off and then back on. You should be good to go. Unfortunately when the tank gets completely full it will stop printing. The cost of repair however is more than the cost of replacement.

Jun 03, 2009 | Canon i80 InkJet Printer

1 Answer

Cannot find information on waste ink absorber for Canon i80


The waste ink absorber collects any spilt in from the head and stops it leaking out or sitting in the bottom of the printer casing. The printer is telling you that the one in yours in nearly full. You know have two options:

1. Replace the waste ink absorbers and reset the counter (will require taking the printer apart)
2. Reset the counter only (you run the risk of ink leaking out)

The waste ink absorber for the I80 can be got quite cheaply if you google about.

You can reset the counter by:

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press
the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is
selectable.)
2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power
button.)
3) While holding the Power button, press the Resume/Cancel button 3 times, and then release the Power
and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights
alternately in either orange or green, starting with orange.) During initialization, the LED blinks in
green.
4) When the LED stops blinking and lights in green, press the Resume/Cancel button 4 times.

Hope that helps

Nov 16, 2008 | Canon i80 InkJet Printer

1 Answer

Canon pixma ip3000


This should do the trick!

i320 waste ink counter reset.
1. Turn off the printer.
2. Press and hold the POWER button, turn on the printer.
3. The indicator should be green.
3. Press and release the RESUME button , the indicator should be orange.
4. Press and release the RESUME button again, the indicator should be green.
5. Release both buttons.
6.Connect the printer to PC.
7.Open General Tool software,choose ¡°USB PORT¡±.
8.Choose ¡°SET DESTINATION 1 ¡±,OK!
You can download the software at: http://www.it0577.com/yezmao/i320.exe

Dec 03, 2007 | Canon i80 InkJet Printer

1 Answer

WASTE INK FULL


You need to download and run a service reset program which will reset the service counter. Have a search online, but I bet the solution looks something like this (cue music):

http://www.fixyourownprinter.com/forums/printer/33821

Good luck...

Nov 13, 2007 | Canon i80 InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...