Question about SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive

2 Answers

Sandisk not working

I put it in the port and the light does not even turn on.
i have some very important papers due on tues. and wed. worth a lot a poi HELP!!!!! HELP!!!!! HELP!!!!


Posted by on

  • Anonymous Feb 19, 2008

    The same. I plugged it in, then it found the drive. But after a few minutes its gone?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Have you tried anything else in the same usb port, if you have does it work ? Have you checked the usb ports and they are working correctly, have you also tryed plugging in the flash drive to your high speed usb's (usually on the back of the tower) if you have tryed all of these and it is the same I am afraid I cant help you, Good luck.

Posted on Feb 19, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ditto. Light flickers for a BRIEF second.

Any ideas? Is it just broken - i JUST purchased this less than a month ago...

Posted on Feb 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I plug my jump drive in to my computer and nothing happens, the light does not turn on and it doesnt show up on the computer, i have a very important paper i need to complete i need help now!!


Try connecting to a different USB port.
Try connecting to a USB port on a different computer.

If neither works, then your device has "failed". Permanently.

Nov 21, 2010 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

Cruzer Micro 4GB will not light up or be recognized


You used the drive for 12 hours. maybe it was damage due to overheat.
when you plug the drive, did you hear a beep?

Aug 14, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

I accendentally knocked out my scandisk and it won't work


Good day sir/maam, you must not remove the sandisk especially if its reading the disk, data can get corrupted. In doing so may destroy even your sandisk cruzer. Try the unit in other PC. do it several times. if still cant be recognize, bring it to your dealer, they have in house tech that may save your disk. if not you can demand for a new one if its under warrantee. As for your file, sad to say this you may need to back up more often, especially important ones. hope this helps

Aug 03, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

Says "access denied"


It means that your System Administrator (IT people) shut off the USB ports so you can not bring in outside files -or- remove files from your work computer.

Some companies do this for security reasons.

The only way around this is to contact your System Administrator or IT people and state that you need the USB ports activated...
But they may say no to your request due to company security standards.

Apr 12, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

SanDisk Cruzer Titanium 4gb NOT WORKING !!!


bad news bro, the disk isnt initialized. your data is long gone only a data lab may get them back

Mar 10, 2009 | SanDisk 1GB Cruzer Titanium USB Flash...

1 Answer

SanDisk cruser micro 4GB


Please go to your nearest computer hard drive repaire shope they will repaire the drive pen drive is infected with virus ok so you dont put any pc before scaning means fit the pend drive before open the drive you should scan the virus then you can safly it works other wise file will virus atacked

Jul 21, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

SanDisk u3 micro 1 GB Cruzer


hi turn off your pc put the card into the usb then turn on your pc let the pc find the drives for it and load on if this dose not work try the same in another usb port ok
if it works you must format the 1 gig stick befor you use it
ok hope this helps

May 23, 2008 | SanDisk 1GB Cruzer Titanium USB Flash...

1 Answer

SanDisk 4GB cruzer URGENT problem! Please, please help! :)


it may have overheated and became stuck. Stick it in a plastic bag and put it in the freezer for 1/2 hour then try it. Do not leave it out without power for long or moisture will condense on it.

Nov 28, 2007 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

5 Answers

Stopped working COMPLETELY!!!!


Had same problem.

I wiggled back and forth the part that goes into the USB port and the drive was recognized and I could copy my files onto my hard drive.

I had this problem with a different make USB flash drive and used the same procedure to get the files back.

I think that some connection inside the flash drive works loose after a while.

I am not going to trust these drives for files storage, but only to transfer files.

Jul 27, 2007 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

Not finding what you are looking for?
SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Hard Drives Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

laikexpert
laikexpert

Level 3 Expert

281 Answers

Tony

Level 3 Expert

2598 Answers

Are you a SanDisk Hard Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...