Question about ViewSonic VX922 19" Monitor Flat Panel

2 Answers

How do I get the back off of my Viewsonic VX922 monitor?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

There are only 4 screws holding the back on. After taking them out slowly work your way around the back starting out at the bottom by pulling up on the back of the case. Eventually it will separate.

Posted on Mar 06, 2010

  • webmaster358 Mar 06, 2010

    Also check the YouTube video on disassembling the VX924 which is identical to the VX922.

    http://www.youtube.com/watch?v=ZccykxrtX...


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 340 Answers

Take out the 6 screws that hold the stand start from the bottom and spred the two covers apart at the split

Posted on Mar 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viewsonic VX922 19" - green


Since you hadd confirmed that the monitor is faulty with a swap then it seems that the input signal processor is faulty.
Only a signal test will confirm the fault in the stage , so check from the power supply section to see if the set has tripped off due to a protection- if so check the output drivers.

Jul 27, 2011 | ViewSonic VX922 19" Monitor Flat Panel

1 Answer

Having trouble powering up my Viewsonic VX922. See the analog data, but have to power down for 20 sec (several times) to get the digital data on the screen


bob_loopeker, If you know that your pc is ok with different monitor then you will need to inspect the power supply board inside your VX922. All you need in the way of info is here on fixya!! All you need to do is read and make decision on what to do. Spend some time reading in my fixya profile or do "ctrl" key and click on "vx922 19" monitor" that is highlighted in light blue text above. May need new capacitors installed on unit's "switch-mode-power-supply" printed circuit board. hopre this helps. 12fixlouie

Mar 17, 2010 | ViewSonic VX922 19" Monitor Flat Panel

1 Answer

Need a power supply for View Sonic VX922. Where


Here is a link for your View Sonic power supply:

http://www.shopzilla.com/laptop-power-adapters/viewsonic-power-supply/9177/products

It should have a replacement for you.

Jan 30, 2010 | ViewSonic VX922 19" Monitor Flat Panel

1 Answer

How do I get my Viewsonic VX922 LCD monitor apart? I have removed the 4 corner screws and the stand, but the back seems to be stuck solid.


in a similar situation the solution was an Ipod case opener used along the perimeter to release the plastic catches..

Mar 29, 2009 | ViewSonic VX922 19" Monitor Flat Panel

1 Answer

VX922 19" Monitor -Terrible customer service by ViewSonic


The only advice that I have on this issue would be to call ViewSonic again and as soon as you get a Rep on the phone you need to ask for a supervisor. In the event that the supervisor is not helping you ask to speak to his supervisor. Make a point to mention the issues that you had in the past and then make them aware that you are upset while maintaining your cool because they will be more apt to work with you if you remain calm.

If all else fails you might mention that there is a burning or smoke smell coming from the monitor :-)

Dec 27, 2008 | ViewSonic VX922 19" Monitor Flat Panel

1 Answer

Viewsonic VX922 - black screen of death and the blinking (mocking!) green led


Really if this happens then you may want to contact viewsonic to see if it still in warrant. Reminder that most of their monitors have a 3 year warrany from the date of purchase. So make sure that you have your proof of sales/receipt/POP/invoice or what ever you want to call it ready. This model is old so they will ask for it if its a first time repair.

Oct 28, 2008 | ViewSonic VX922 19" Monitor Flat Panel

1 Answer

ViewSonic vx922 Power circuit


It may be best to contact Viewsonic about a service manual for this unit and ask to see if that sell any parts for this model.

Sep 12, 2008 | ViewSonic VX922 19" Monitor Flat Panel

2 Answers

No Power, But I can't open the plastic case


Viewsonic Vx922 is sight tuf to open the rear door

Take and sharp blade
one side there is small gap to insert it
and then just twist and move front and round the monitor
all clips inside will unlock after that it will open

Thank U

Apr 15, 2008 | ViewSonic VX922 19" Monitor Flat Panel

Not finding what you are looking for?
ViewSonic VX922 19" Monitor Flat Panel Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Cindy Wells

Level 3 Expert

5102 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...