Question about Microsoft Internet Explorer 8

2 Answers

Cannot connect to internet - get told cannot connect the web page. No addresses connect....

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 93 Answers

Refer this article for Browser Issue

Posted on Mar 20, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 581 Answers

It is almost certainly your firewall or other security software blocking the connection Make sure that your firewall program is configured to allow internet access.Besides personal firewalls, other security programs, including Norton or Symantec Antivirus, can block internet access or cause other connection issues, especially after the browser is updated.

Posted on Jan 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The internet said that they can not bring up your web page.


Internet Explore Cannot Display the Webpage
As you browse the Web with Internet Explorer, you may occasionally encounter an error message about the browser being unable to display the requested Web page.
If your browser is unable to display a page, the issue lies somewhere along the path from your computer to the remote website. In some cases, you can resolve the issue by troubleshooting your computer or Internet connection. Internet Connection Issue
If Internet Explorer is unable to display any pages at all, see if you are able to browse the Web on another computer.
If none of the computers in your home can browse, the problem is related to your Internet connection.
In some cases, you can resolve an Internet connection issue by unplugging the power connections for your broadband modem and router temporarily.
If you are still unable to browse, contact your Internet service provider for further assistance.

Malicious Software
If you are unable to browse the Web on your computer but can browse on other computers, the computer itself has an issue. In some cases, this can mean that your computer is infected with malicious software.
Download an anti-virus program on another computer and run it on the affected computer to troubleshoot the issue.


User Error If you receive an error in Internet Explorer when you attempt to browse to a single website, but other websites work, check to make sure that you are entering the address of the website correctly.
By default, Internet Explorer searches the Web for a close result if the address you entered is not associated with an actual website. If you have disabled this feature and enter a website address incorrectly, Internet Explorer displays an error message.

Remote Website Issue

If you are unable to browse to a single website and are certain that you have entered the website address correctly, it is likely that the website itself has a problem.
You can wait and attempt to view the website again later, or search for the website on Google or another search engine and click the "Cached" link to view a recent cached copy of the website.


http://help.expedient.com/browsers/

http://windows.microsoft.com/en-US/Windows7/Tips-for-solving-problems-with-Internet-Explorer

Aug 09, 2013 | Microsoft Windows XP Home Edition

1 Answer

My computer is connected to the internet, but it will not show the actual web page what should I do


Find the URL address line in the upper left of your web browser and type in the web page address that you want to look at.
Is this the kind of info you want or something different?
Hope this helps.

Mar 01, 2012 | Dell Dimension 2200 (A-D0601) PC Desktop

1 Answer

Turn on shuts off blue screen B8000028


The steps to resolve this issue on a product that you want to set up with a wireless connection and on a product that you want to set up with a wired, or Ethernet, connection differ slightly. Depending on the connection type you want to set up, select one of the following methods, and then follow the steps provided to resolve the issue.Method one: Resolve the error on a product that uses a wireless connectionStep one: Print a network configuration page
  1. Disconnect the power cord from the back of the product.
  2. Remove the phone or Internet cable that is connected to the back of the wireless router. Do not reconnect this cable until instructed to do so.
  3. Reconnect the power cord to the back of the product. If the product does not turn on automatically, press the On button (c00636182.gif ) to turn the product on.
  4. Make sure that the blue Wireless light is on. If the Wireless light is not on, press theWireless button on the front panel of the product to turn wireless on.
  5. When the product is in the ready state, press and hold the Cancel button for several seconds. The network configuration page prints.
  6. On the network configuration page, check the Network Connection Status line. If the status entry reads Ready , continue with 'Step two: Set the product IP information in the Embedded Web Server (EWS).' If the status entry reads anything else, continue with the next step.
  7. Press the Setup button (c01726396.gif ) on the product control panel, select Network , and then select Wireless Setup Wizard . Follow the instructions in the wizard to complete the configuration.
  8. When the Wireless Setup Wizard is complete, press and hold the Cancel button for several seconds. The network configuration page prints.
Step two: Set the product IP information in the Embedded Web Server (EWS)
  1. Make sure that the computer is connected to the same router that the product is connected to.
  2. On the network configuration page that you printed in 'Step one: Print a network configuration page,' look in the General Information section. Make a note of the following information.
    • IP Address
    • Subnet Mask
    • Default Gateway
    note.pngNOTE:Each of these addresses is in the IP address format. For example, 192.168.1.100 is an IP address. Make sure that you note the numbers and the dots exactly as they appear on the network configuration page.
  3. Open a Web browser, such as Internet Explorer or Mozilla Firefox, on your computer.
  4. Type the product IP address in the address bar of the Web browser, and then pressEnter . The Embedded Web Server (EWS) page for the product opens.
  5. On the EWS page, click the Networking tab.
  6. In the left pane of the Networking screen, select Wireless (802.11) , and then select theIPv4 Configuration tab in the right pane.
  7. Select Manual IP .
  8. In the IP Address text box, type an IP address that is within the range of 192.168.1.10 to 192.168.1.60. For example, the IP address 192.168.1.25 is correct, but 192.168.1.61 is incorrect.
  9. In the Subnet Mask text box, type the Subnet Mask address that you located on the network configuration page.
  10. In the Default Gateway text box, type the Default Gateway address that you located on the network configuration page.
  11. Click Apply to save these settings.note.pngNOTE:After the new IP address is set in the EWS, the computer loses the connection with the product, and the EWS page becomes unresponsive. This is expected behavior. Wait 10 seconds, and then continue with the next step.
  12. Close the Web browser.
Step three: Restart communication and complete the installation
  1. Press the press and hold the Cancel button for several seconds. The network configuration page prints.
  2. Make sure that the product is connected to the network and that the IP address matches the IP address that you typed in 'Step two: Set the product IP information in the Embedded Web Server (EWS).'
  3. Connect the phone or Internet cable to the back of the router.
  4. Continue the product installation. If the software has already been installed, insert the software CD into the computer CD drive, and then select Add A Device from the menu that appears on the computer.
If the installation is successful and the error message does not appear again, the issue is resolved, and there is no need to continue troubleshooting.If the installation is not successful and the error message appears on the product control panel, continue with the steps in the Workaround section.Method two: Resolve the error on a product that uses a wired (Ethernet) connectionStep one: Print a network configuration page
  1. Disconnect the power cord from the back of the product.
  2. Remove the phone or Internet cable that is connected to the back of the wireless router. Do not reconnect this cable until instructed to do so.
  3. Reconnect the power cord to the back of the product. If the product does not turn on automatically, press the On button (c00636182.gif ) to turn the product on.
  4. When the product is in the ready state, press and hold the Cancel button for several seconds. The network configuration page prints.
  5. On the network configuration page, check the Network Connection Status line. If the status entry reads Ready , continue with 'Step two: Set the product IP information in the Embedded Web Server (EWS).' If the status entry reads anything else, continue with the next step.
  6. Make sure that the network cable, or LAN cable, is connected to the computer and to the product.
  7. When the product is connected to the network, press and hold the Cancel button for several seconds. The network configuration page prints.
Step two: Set the product IP information in the Embedded Web Server (EWS)
  1. Make sure that the computer is connected to the same router that the product is connected to.
  2. On the network configuration page that you printed in 'Step one: Print a network configuration page,' look in the General Information section. Make a note of the following information.
    • IP Address
    • Subnet Mask
    • Default Gateway
    note.pngNOTE:Each of these addresses is in the IP address format. For example, 192.168.1.100 is an IP address. Make sure that you note the numbers and the dots exactly as they appear on the network configuration page.
  3. Open a Web browser, such as Internet Explorer or Mozilla Firefox, on your computer.
  4. Type the product IP address in the address bar of the Web browser, and then pressEnter . The Embedded Web Server (EWS) page for the product opens.
  5. On the EWS page, click the Networking tab.
  6. In the left pane of the Networking screen, select Wired (802.3) , and then select the IPv4 Configuration tab in the right pane.
  7. Select Manual IP .
  8. In the IP Address text box, type an IP address that is within the range of 192.168.1.10 to 192.168.1.60. For example, the IP address 192.168.1.25 is correct, but 192.168.1.61 is incorrect.
  9. In the Subnet Mask text box, type the Subnet Mask address that you located on the network configuration page.
  10. In the Default Gateway text box, type the Default Gateway address that you located on the network configuration page.
  11. Click Apply to save these settings.note.pngNOTE:After the new IP address is set in the EWS, the computer loses the connection with the product, and the EWS page becomes unresponsive. This is expected behavior. Wait 10 seconds, and then continue with the next step.
  12. Close the Web browser.
Step three: Restart communication and complete the installation
  1. Press and hold the Cancel button for several seconds. The network configuration page prints.
  2. Make sure that the product is connected to the network and that the IP address matches the IP address that you typed in 'Step two: Set the product IP information in the Embedded Web Server (EWS).'
  3. Connect the phone or Internet cable to the back of the router.
  4. Continue the product installation. If the software has already been installed, insert the software CD into the computer CD drive, and then select Add A Device from the menu that appears on the computer.
If the installation is successful and the error message does not appear again, the issue is resolved, and there is no need to continue troubleshooting.If the installation is not successful and the error message appears on the product control panel, continue with the steps in the Workaround section.
Or else remove CMOS battery located on formatter, wait 15mts refix then check..

Oct 06, 2011 | HP Officejet Pro 8500 Wireless All-In-One...

1 Answer

Forgot passwork how do i find it


If you still have your username and password to your router page, there is a chance that you will still be able to retrieve your passphrase or password for your home network. To access your router web page and change the settings, get the IP address of your router, usually if you mouseover on the icon on the bottom right corner of your computer, the IP address of your home network shows up. Type in the IP address on the address field of your web browser and it would direct you to your router page. Passphrases are usually under security of your router web page.
Note: You should be connected in your home network to access your router's web page. If you ca't connect to the internet because you can't connect to the home network without your password, try using an ethernet cable just so you can connect to the internet and access your router's web page. Once you have retrieved your passphrase you can disconnect the cable and go wireless. However, if you don't remember your username(usually admin, unless you changed it and password), I suggest yo call your internet service provider for assistance. They will reset your router, so when you login again you will have the option to change the passwords to whatever you like.

May 06, 2011 | 2wire Computers & Internet

1 Answer

I want to unblock the facebook sites


There will be an option on the router's web configuration page called URL blocking or web filtering. Your can unblock it from there. For accessing the router's web configuration page you have to type the default gateway on the brower's address bar. Your can your IE or Firefox.

Steps to find the default gateway

Start->Control panel->network and internet connections->network connection-> Right click Local area connection-> Status->Support

This will show you the default gateway something like 192.168.1.1

The open Internet explorer type 192.168.1.1 on address bar and unblock the facebook

9b4f037.jpg

Aug 17, 2010 | Computers & Internet

1 Answer

Router connection


> router should be turned off after use

Nonsense. The router uses DHCP (Dynamic Host Configuration Protocol) to obtain (only!) one IP-address from your I.S.P. Each IP-address comes with a "lease", i.e., "use this IP-address for the next NN hours, and after that time, send a request to 'renew' the IP-address for another NN hours". This should(!) happen automatically -- without a need to restart the router.

So, if only the two "wireless" laptops are having the problem, the problem is inside the router.
Connect to the web-server "inside" the router, and look at the "status" web-page, and then the "log-files" web-page, to see what error-messages have been recorded.

Jul 03, 2010 | Belkin (F5D8231-4) Wireless Router...

1 Answer

Am trying to set up a Windows 2003 server to serve web pages over the Internet. Have got a DSL line from Embarq. They installed a EQ-660R interface which is really build by Zyxel. I can reach the Internet...


In order to access your default web page remotely, port 80 "INBOUND" must be open to the internet.

To access your web server, two things need to happen.
The first is you or someone else must initiate a http request on port 80 using the public IP Address of your DSL connection.
Second, your router must forward that request to your servers internal ip address.

Ex. Lets say your public ip address is 24.39.45.10. In a browser window from a remote location, you enter the URL http ://24.39.45.10 The request will be sent to your router on port 80.

Your web server will not have the ip address 24.39.45.10 because it's on the private network side of your router. So, lets say the private ip address of you server is 192.168.1.100

You need to configure your router to take the http request coming from the internet on port 80 to ip address 24.39.45.10 and forward that request to 192.168.1.100. This is known as port forwarding.

You also need to configure the host header name of your "web page" so it knows it needs to display the web page.

Since we're just using ip addresses in this example and not an actual FQDN (fully qualified domain name), you would make a host header entry for the web page of 24.39.45.10.

To do this open IIS.
Navigate to the web site in question and right click on it then select properties.
On the website tab, ensure the port number is set to 80 and choose the appropriate internal ip address if you have more than one network adapter in the server.
Next click on the advanced tab and look for the heading Multiple identities for this site. This is where you enter the ip address 24.39.45.10.

If you have a fully qualified domain name, you would enter the domain name instead of the ip address as specified in this example.

Host header names are the key to running multiple websites from one physical server as long as it has the necessary horsepower to do so.

Hope this helps and isn't confising. If you're confused in any way, don't hesitate to ask for clarification.


Sep 13, 2009 | Zyxel P-660RU-T1 ADSL Ethernet/USB Router...

1 Answer

Cant share internet using a router


Hi There, what model of dlink router do you have?
Also, Or just check the ports you have in your router, the internet should be connected to the WAN port and the switch and/or computers to the LAN port(s).
If the router is new by default you should be able to access internet by plug everything the way I told you.
Also, by default the router ip address should be 192.168.1.1, type that into your web browser address bar, then you will have access to the router admin web page were you can see the status page, there will tell you if you have or not access to Internet really. Maybe the problem is that the router have no access internet access at all.

Mar 12, 2009 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

Yahoo server


Can you open any other pages in web? If not then your internet connection is not working and you should call and ask them "Why am I shut off?"

If you can open other web pages then check the address in the address bar and try manually retyping it as http://www.yahoo.com/

Nov 22, 2008 | Yahoo Mail

2 Answers

Router's IP address


Do you have a connection in the first place?
Doesn't matter if you connect wired or wireless.

Then run Start - Run
type cmd en press OK
you get a black command prompt
type ipconfig and press enter
you should have an ip-address starting with 192.168.0
if that's correct, check the default gateway. It should be the ip-address from the manual. Anyway, the address listed here is the address you need. Type this address in your web browser and you should get to the router configuration pages.

If you encounter any problems, please post them here.
I'll help you further then...

May 24, 2008 | D-Link AirPlus DI-524 Wireless Router

Not finding what you are looking for?

Open Questions:

0 Answers

Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; nsapshr 10.0.3) Timestamp: Mon, 7 Jul 2014 20:45:22 UTC Message: Script error Line: 0 Char: 0 Code: 0 URI: https://maps.gstatic.com/cat_js/intl/en_us/mapfiles/api-3/16/13/%7Bmain,drawing%7D.js Message: Script error Line: 0 Char: 0 Code: 0 URI: https://maps.gstatic.com/cat_js/intl/en_us/mapfiles/api-3/16/13/%7Bmain,drawing%7D.js Message: Script error Line: 0 Char: 0 Code: 0 URI: https://maps.gstatic.com/cat_js/intl/en_us/mapfiles/api-3/16/13/%7Bmain,drawing%7D.js Message: Script error Line: 0 Char: 0 Code: 0 URI: https://maps.gstatic.com/cat_js/intl/en_us/mapfiles/api-3/16/13/%7Bmain,drawing%7D.js Message: Script error Line: 0 Char: 0 Code: 0 URI: https://maps.gstatic.com/cat_js/intl/en_us/mapfiles/api-3/16/13/%7Bmain,drawing%7D.js Message: Script error Line: 0 Char: 0 Code: 0 URI: https://maps.gstatic.com/cat_js/intl/en_us/mapfiles/api-3/16/13/%7Bmain,drawing%7D.js Message: Script error Line: 0 Char: 0 Code: 0 URI: https://maps.gstatic.com/cat_js/intl/en_us/mapfiles/api-3/16/13/%7Bmain,drawing%7D.js Message: Script error Line: 0 Char: 0 Code: 0 URI: https://maps.gstatic.com/cat_js/intl/en_us/mapfiles/api-3/16/13/%7Bmain,drawing%7D.js Message: Script error Line: 0 Char: 0 Code: 0 URI: https://maps.gstatic.com/cat_js/intl/en_us/mapfiles/api-3/16/13/%7Bmain,drawing%7D.js Message: Script error Line: 0 Char: 0 Code: 0 URI: https://maps.gstatic.com/cat_js/intl/en_us/mapfiles/api-3/16/13/%7Bmain,drawing%7D.js

Jul 07, 2014 | Microsoft Internet Explorer 8

See all Microsoft Internet Explorer 8 Questions

Microsoft Internet Explorer 8 Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2845 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...