Question about Smeg SE399X/5 Stainless Steel Electric Single Oven

1 Answer

Smeg oven is "locked", needs unlocking or resetting

Hi,
Our SMEG oven. S399X-6< seems to be locked or something. The 6 is blinking, but all the oven functions are not working. The only thing which works is the clock.
I think a reset or unlock it would do the job. But does anybody know how this can be done. It is not in the manual.
Thanks for your help!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Use a flashlight and look into the hole from where you normally feel hot airflow. Locate the hook holding the door on the left side. Using a thin screwdriver or a knife gently push the hook to the left. Voila! The door is open and functions are back working normally. Also known as Error 4 interlock problem. This will depends on the model of the oven

Posted on Jun 04, 2013

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1462 Answers

SOURCE: Smeg S20XMF single oven (older version with analogue clock)

does not need an additional 13a supply

Posted on Mar 20, 2007

  • 417 Answers

SOURCE: Our smeg oven is not

Check that the oven is on the 'manual cooking' setting rather than Automatic, if its on Auto it will not come on until the time set.

Posted on Dec 12, 2010

kachbibi1
  • 979 Answers

SOURCE: smeg oven not working. only clock and thermostat light working

It sounds like you have either one of the following things that need attention. First, turn off both breakers to the oven and then back on. Next check the wiring from the receptacle to the back of the oven. Next, check your internal fuses. Most ovens have them. Last, check the wiring to the elements and control switches. Somewhere you have a wire burned off the terminals or control switch. That smell you referred to is probably one of the wires that may be burned.

Posted on Feb 11, 2009

TaPuna
  • 70 Answers

SOURCE: smeg oven model SA708X--Clock faulty

hi, if you have a faulty clock it is likely the relay in the clock is stuffed you could try to repair it but i think you are better off just buying a new clock, clocks are expensive thou, so bypassing is a good choice

Posted on Sep 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Has anyone got a successful recipe for a sponge made in a new Smeg oven. Had no trouble with my old Smeg but new one doesn't seem to produce the same standard of product with the same recipe


Dunno, if I had a sponge in MY smeg oven i'd try to cook it at 400 degrees for at least 5 hours then bury it in the backyard!
Then I'd be sure it was dead.
...JP

Mar 16, 2015 | Smeg Ovens

1 Answer

Smeg electric oven timer controls


Hello,

first is unplug the the oven from the wall outlet, to hard reset the setting. wait for almost 20 minutes then plug it again.

please tell me if there is still problem after this, melnavz

Apr 10, 2008 | Smeg SE280X Stainless Steel Electric...

1 Answer

Hi, we have a se280x oven and its about 4-5 years old and inherited this when we moved in 2 years ago. But the oven seems to heat sometimes or not constantly and especially seems like e the upper and...


This tutorial will show you how to check your Smeg element and how to replace your Smeg cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating
  1. Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Smeg manual.
  2. If your Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
  3. When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.
If this helped you why not get me a beer? Paul is from the Naturally he would appreciate beer How to Repair Home...


Apr 15, 2011 | Smeg SE280X Stainless Steel Electric...

1 Answer

I have a Smeg SA130P single oven. I have run a self-cleaning cycle. The cycle completed but, some hours later the lock indicator is still on and the door is locked. How do I get it unlocked?


Hi,

Seems like you found out the hard way what I wrote about in this tip...

Check it out it also contains some thing to try on how to unlock that oven..

Self Cleaning Oven Problem

heatman101

Asker's Testimonial " Wish I had read this first. I never would have usedthe self cleaning option. Thanks for the info!! " - amymrocks

Dec 13, 2010 | Smeg F170 Pyrolytic Stainless Steel...

2 Answers

Smeg oven


This tutorial will show you how to check your Smeg element and how to replace your Smeg cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating
  1. Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Smeg manual.
  2. If you're Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
  3. When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.
If this helped like us on facebook please
How to Video Tutorials on Domestic Appliances
How to Video Tutorials on Domestic Appliances

Dec 08, 2008 | Smeg SE399X/5 Stainless Steel Electric...

1 Answer

Smeg Double Oven SD08


this can be hard to do as you should have locked the hinges with the door fully opened before taking it off. the hard part now is (with the door off) you have to push the spring loaded hinges down and lock them with small hook located on each hinge once locked the door will go back on the oven. you then open the door fully and unlock the hinges, good luck

Feb 17, 2008 | Smeg DO81CSS Electric Double Oven

1 Answer

Smeg oven


How long is the oven in operation before you check the air flow ? Most Smeg ovens are electronically integrated and sensitive.

Jan 24, 2008 | Ovens

3 Answers

Oven smoking


I am pretty sure this is just the steam escaping. Smeg ovens seal so evenly that the steam stays in the oven.

Nov 12, 2007 | Smeg SE399X/5 Stainless Steel Electric...

Not finding what you are looking for?
Smeg SE399X/5 Stainless Steel Electric Single Oven Logo

Related Topics:

2,938 people viewed this question

Ask a Question

Usually answered in minutes!

Top Smeg Ovens Experts

ashburton

Level 3 Expert

417 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a Smeg Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...