Question about HP PSC 2410 All-In-One InkJet Printer

2 Answers

Duplexer I have an HP 2410psc all in one printer with a duplexer installed. Since I installed a new desktop with Vista, when I go to print on both sides it says "duplexer not installed". How do I correct this? Thanks.

Posted by on

  • mushtygeezer Feb 26, 2008

    Same problem as Dukeofale, duplexer installed, vista 64bit installed on machine, duplexer not recognized by vista, the option for duplex automatic greyed out, not selectable.

    Latest drivers installed from HP, and from Microsoft for the printer.

    No luck as of yet, have to manually remove and replace pages for duplex printing.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

Vista defaults to having the duplexer "not installed". To correct this go to Start, Settings, Control Panel, Printers, double-click on the 2410, Printers, Properties, Device Settings and set the duplexer to "Installed".

Once you have the duplexer enabled you may find an issue of the back side printing upside down in Vista. You can get a patch for this as described here.

Regards,
Bob Headrick, MS MVP Printing/Imaging

Posted on Jun 21, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

Duplexing has to do with sending and receiving data at the same time. there is also half duplex mode: is where the device can send and receive but not at the same time. try going to start, control panel, printer faxes, find your printer , right click and enter printing prefrences.there may be a tab that says finishing. click this tab and make sure you checkmark print on both sides.
please let me know the outcome if that doesnt fix it i will check into that printer a little more. just another note vista is alittle quircky still so make sure the drivers are updated and vista is updated.

Posted on Feb 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant stop my printer printing both sides of the paper


After you attach the two-sided printing accessory (duplexer) to your product, you do not have the option to print on both sides of the paper when you try to print. The two-sided printing option is not available in the print dialog box.
NOTE: The HP Automatic Two-sided Printing Accessory (Duplexer) ships with some printer models and is available as an optional accessory for others. Solution First, choose your operating system. Next, follow the steps to make sure that your printer driver recognizes the duplexer. Show all ' Hide all hpweb_1-2_plus.gifhpweb_1-2_minus.gifWindows XP Follow these steps to make sure that your printer driver recognizes the duplexer. Step one: Add the Duplex Unit to your printer settings
  1. Click Start , click Control Panel , and then click Printers and Faxes .
  2. Right-click the printer icon (c01601478.gif ) for your HP product.
  3. Click Properties , and then click the Device Settings tab.
  4. Click the plus sign (+ ) next to Installable Options to expand the list.
  5. Click Duplex Unit (for two-sided printing) , and then select Installed from the drop-down list.
  6. Click Apply , and then click OK .
Step two: Set the Two-sided printing preference
  1. Click Start , click Control Panel , and then click Printers and Faxes .
  2. Right-click the printer icon (c01601478.gif ) for your HP product.
  3. Click Printing Preferences , and then click the Features tab.
  4. In the Paper Saving Options area, select Automatic from the Two-sided printing drop-down list.
  5. Adjust other print settings as needed.
  6. Click OK to save the settings.
hpweb_1-2_plus.gifhpweb_1-2_minus.gifWindows Vista Follow these steps to make sure that your printer driver recognizes the duplexer. Step one: Add the Duplex Unit to your printer settings
  1. On the Windows taskbar, click the Windows icon (c01319360.gif ), and then click Printers .
  2. Right-click the printer icon (c01601478.gif ) for your HP product.
  3. Click Properties , and then click the Device Settings tab.
  4. Click the plus sign (+ ) next to Installable Options to expand the list.
  5. Click Duplex Unit (for two-sided printing) , and then select Installed from the drop-down list.
  6. Click Apply , and then click OK .
Step two: Set the Two-sided printing preference
  1. On the Windows taskbar, click the Windows icon (c01319360.gif ), and then click Printers .
  2. Right-click the printer icon (c01601478.gif ) for your HP product.
  3. Click Printing Preferences , and then click the Features tab.
  4. In the Paper Saving Options area, select Automatic from the Two-sided printing drop-down list.
  5. Adjust other print settings as needed.
  6. Click OK to save your settings.
hpweb_1-2_plus.gifhpweb_1-2_minus.gifWindows 7

Oct 31, 2010 | HP Photosmart Premium C309g multifunction...

1 Answer

Duplexer not working with my new vista 64 bit system, can't find drivers...the standard vista drivers don't work.


You could load the 32bit version of XP in to a VM and share the printer.  You would then print via the VM.
Why are you using 64 bit Vista?

May 28, 2009 | HP OfficeJet 6110 All-In-One InkJet...

2 Answers

Cannot get printer (hp C7280) to print double sided


There is a new driver from april 2009 on HPs site which adresses this problem. I installed it, and now everything works fine. You have to download and install it yourself, it doesn´t update automatically.

Apr 26, 2009 | HP Photosmart C7280 Laser Printer

1 Answer

Duplex not recognised


You need to set the duplexer to installed. For Vista this would be done as follows: go to the Printers folder, Right Click on the 5550, Run as Administrator, Properties, (continue), Device Settings, Installable Options, Duplex unit (set to Installed), Apply, OK.

Once you have done this in Vista the duplexer will work but the back side may print upside down regardless of the settings. This can be corrected with a patch available here.

Regards,
Bob Headrick, MS MVP Printing/Imaging

Mar 13, 2009 | HP DeskJet 5550 InkJet Printer

2 Answers

Getting the Duplex Attachment to Work with Vista


what printer do you have?
brand and model?
do you has installed the newest driver and utility for vista operating system?
do you know that Vista and XP are incompatible in terms of drivers?

Vista has many drivers for a lots of printers, but these drivers are "generic driver". The generic driver is a small driver, an incomplete driver, and has a limited functions.

Sep 18, 2008 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Auto duplex disappeared in HP Business Inkjet 1200


The default in Vista seems to be the duplexer is not installed. You will need to tell the driver the duplexer is present. This would be found in the (control panel)printers folder, doubleclick on the 1200d, printer, properties, device settings, installable options, then select "installed" for Duplex Unit.

Aug 14, 2008 | HP Business Inkjet 1200dtn Printer

1 Answer

Duplexer misbehaving


sounds like the duplexer is defective.

Mar 04, 2008 | HP LaserJet 4350dtn Printer

1 Answer

Duplexer


If you really have an HP 4350dtn (d = duplexer), then the duplexer is not connected correctly. Look at the back of the printer for the duplexer. It prtrudes from the back drop down tray and is used to print on both sides. I would pull it out and push it back in to make sure all connections are tight.

Tray number 1 is the manual feed tray in the front of the unit.

Mar 03, 2008 | HP LaserJet 4350dtn Printer

4 Answers

5652 and Vista - duplex print not working


In Vista the default s the duplexer is "not installed". Go to Start, Settings, Control Panel, Printers, double-click on the Deskjet, Printers, Properties, Device Settings and set the duplexer to "Installed".

If the duplexer prints the back side upside down in Vista once it is enabled you can get a patch as described here.

Regards,
Bob Headrick, Microsoft MVP Printing/Imaging

Feb 19, 2008 | HP DeskJet 5652 InkJet Printer

1 Answer

Duplexer problem


First, the machine always prints the first page first. Make sure you have the right driver (4 plus and not 4)and check the settings in the device settings of your printer driver on the pc. Also make sure the duplex unit is for the 4 plus and not the 4.

May 17, 2007 | HP LaserJet 4 plus Printer

Not finding what you are looking for?
HP PSC 2410 All-In-One InkJet Printer Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...