Question about Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

1 Answer

How do I take the brush out?

I have a "Kenmore 31912 Progressive Direct Drive" vacuum. A string is wrapped around the brush. I am able to pull most of it out, except a part that is stuck on the left side of the brush. It is not obvious how to remove the brush assembly to take the rest of the string out. Any advice is appreciated.

Posted by on

  • KenMoreHelp Feb 17, 2008

    Oops ... the vacuum I have is "Kenmore Bagless Progressive Direct Drive"

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers

Most of these progressive drives have a bottom plate that you can take off, then you can get to the brush roll asm. There will be several screws.

Posted on Feb 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenmore upright direct drive vacuum. The vacuum works fine in all ways except the brush just stopped working. Any ideas?


The rubber belt which drives the brush could be broken or the brush can be clogged with string and hair etc.

Jul 15, 2010 | Kenmore Progressive 35922 Bagged Upright...

1 Answer

BELTLESS BRUSH WILL NOT REVOLVE


I bought my parents the exact same model. Do you have the floor select switch "ON" for the brush? Did the overload protector switch trip? There is a little red button sticking out from the right hand side of the head. Check to see if it is pertruding past the cover. If so, push button in and it should reset.

Feb 05, 2010 | Kenmore 31912 Progressive Direct Drive...

1 Answer

Agitator unit on Kenmore Progressive 116.25915503 won't spin. I have cleaned out all hair and string wrapped around it. Belt is good. It seems to spin on one side but stuck on the other. Could string be...


Pry the end caps off the brush bar, you will find hair and string wrapped up tight in the end. the bearing may also be shot, you can try and oil it up a bit to keep it spinning. <!-- from fixya rte -->

Oct 21, 2009 | Kenmore Vacuums

1 Answer

Kenmore vac has no suction in hose or base


Find a Shop that sells these & get them to show you.how it works.

Apr 08, 2009 | Kenmore 31912 Progressive Direct Drive...

1 Answer

Need new filter


i found the answer on the internet

Nov 11, 2008 | Kenmore 31912 Progressive Direct Drive...

2 Answers

Kenmore Progressive 100


Check the brush roll ends, make sure they turn freely, if not then replace it. The belt may look ok, but they stretch after a short time and should be replaced.

Mar 24, 2008 | Kenmore 31912 Progressive Direct Drive...

Not finding what you are looking for?
Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18357 Answers

Roger Potts

Level 3 Expert

694 Answers

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Are you a Kenmore Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...