Question about Acer AL1916W 19" LCD Monitor

2 Answers

Acer al1916W Driver updates

Monitor came w/o driver and cannot get 1440x900 ; how can I acquire? Appears many have had issue, but I have not found location to resolve...

Appreciate your help/ guidance

Posted by on

  • kote Mar 21, 2008

    need MONITOR DRIVE acer al1916w free download

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Problems like this are usually the fault of the video card and not the monitor. Does your video card support 1440 X 900? Try updating your video card drivers.

Posted on Mar 10, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 198 Answers

Plugged up display via the VGA cable to an HP dv6000 laptop; the Acer powered up and displayed fine ... however, noticed a faint waving motion in the picture, as if the screen was literally gel and began to wave, from top to bottom as it appeared. Best I can describe it ... any suggestions as to why? I only connected it to this HP to try it out, I ordered it from newegg and wanted to make sure pixels werent dead on arival. I will be getting an Aurora 7500 (Alienware): AMD X2 6000, Windows Vista Premium, 2GB RAM, GeForce 512 8800GT, SLI ready motherboard ... I heard good things of Acer and hoped this display would look great with my soon-to-come setup and im sure it will. However, just nervous it will do this on my Aurora. Any help or suggestions would be beyond appreciated!!

Posted on Feb 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My LCD ACER monitor AL1916w was not give actual resolution i.e. 1440x900. i am using window xp, Intel core 2 duo. Bhal


You can try installing the driver for the monitor,
http://support.acer-euro.com/drivers/downloads_gd.html

You alos need to verify that you have correct video card driver.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

May 13, 2011 | Acer AL1916W 19" LCD Monitor

1 Answer

The display is not fit on the monitor help me how to fix it thanks!!! ayanblink@yahoo.com


You need to set your PC video resolution to the native resolution of this monitor, which is 1440x900 @60Hz. Mkae sure to to have correct video card driver installed and may also need the driver for this monitor if the native resolution is not listed.
Resolution adjustment:
From Microsoft: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

and here:
http://www.helpwithpcs.com/tipsandtricks/changing-screen-resolution-win-xp.htm

and here:
http://www.videojug.com/film/how-to-change-screen-resolution-in-windows-xp-and-windoiws-7


Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

Sep 09, 2010 | Acer AL1916W 19" LCD Monitor

1 Answer

I need the driver for my monitor ACER x193hq for windows xp, can you help me?


http://www.driverstart.com/start622012.html
I found a driver at this above website, usually monitor don't require drivers, as windows usually "Knows" the monitor.

Aug 27, 2010 | Acer AL1916W 19" LCD Monitor

1 Answer

Our acer 19in LCD monitor goes blank after initial startup and msg "Input not Supported" appears. Startup msgs are shown but once Windows XP starts, this error appears


Your resolution is set above what the monitor supports.

when computer is first starting up hit f8 to get to boot modes.

choose Enable VGA Mode: This option starts Windows in 640 x 480 mode by using the current video driver (not Vga.sys). This mode is useful if the display is configured for a setting that the monitor cannot display.

When you are booted into windows you can then set your resolution to the highest that the monitor supports which is 1440x900

Let me know if this helps.

Mar 16, 2010 | Acer AL1916W 19" LCD Monitor

1 Answer

I recently purchased and installed the P191W monitor, and now my pictures are stretched. I was told I new to get a new graphics card. What card should I get? Or can I just update the driver? I am running...


Find your monitor's native resolution, in your case it's 1440x900. Go to display settings (usually right-click on desktop and choose properties), go to settings tab and move the resolution slider until it shows 1440x900. Confirm, the screen should flicker for a moment and adjust - and you should be fine.
If there is no 1440x900 resolution available, then installing a monitor .inf file that came on a disk accompanying the monitor might help.

Oct 24, 2009 | Acer AL1916W 19" LCD Monitor

1 Answer

Input not supported is floating round my monitor screen how do i get rid of it


You probably need to change the resolution setting in your computer display settings to a setting that is supported by the monitor.
Your resolution setting right now is probably too high to be recognized by the monitor.
1440x900 should be the resolution setting for an AL1916w if your video card will allow that setting
Fran

Jul 19, 2009 | Acer AL1916W 19" LCD Monitor

1 Answer

"Input Not Supported" after adjusting screen resolution


What resolution are you trying to run? The native resolution for your monitor is 1440 x 900, setting to that should fix your issue

Jul 13, 2009 | Acer AL1916W 19" LCD Monitor

1 Answer

After loading windows Vista screen says no signal


steve, i dont think there is any problem with monitor. restart ur pc in safe mode, change resolution to 1440X900.

Mar 02, 2009 | Acer AL1916W 19" LCD Monitor

1 Answer

Distorted digital photos


Most likely the resolution of your desktop has and aspect ratio that in incorrect for your monitor. The native resolution of that monitor if 1440x900. Use the Windows (if using windows) desktop properties to set the desktop resolution to 1440x900.

Jun 09, 2008 | Acer AL1916W 19" LCD Monitor

3 Answers

Acer AL1916W monitor


The AL1916W's native resolution is 1440 x 900. See if your display settings can produce that resolution.

Sep 22, 2006 | Acer AL1916W 19" LCD Monitor

Not finding what you are looking for?
Acer AL1916W 19" LCD Monitor Logo

451 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computer Monitors Experts

 Elex
Elex

Level 2 Expert

49 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

John Trigg

Level 2 Expert

250 Answers

Are you an Acer Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...