Question about ViewSonic VX924 19" LCD Monitor

2 Answers

Blinking power button on my monitor

I plug my ViewSonic VX924 LCD monitor in and only the LED power button blinks at different intervals, sometimes the light stays on longer than other times and when it stays on longer and shuts off again i can see a little bit of a change on the screen like its trying to do something? no picture is displayed and eventually it blinks at very long intervals or barely at all. anyone have any ideas??
thanks
anthony

Posted by on

  • Anth123 Feb 17, 2008

    now that i have tried something i realize that only when the computer is off, the blinking occurs at smaller intervals, when i turn the computer on, the blinking is over longer periods of tiem and barely noticeable
    thanks again!
    anthony

  • Anonymous Feb 20, 2008

    i have the same problem.....



    apparently viewsonic had a problem with these models and changed them after like 4 months...the monitor is dead...

×

2 Answers

Thanks everyone, it turns out that i left the monitor connected to power for a few hours and now its running like a charm. it hadnt been plugged in for a while and it looks like maybe it just had to warm up
thanks
anth

Posted on Feb 21, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 198 Answers

Sounds like an inverter problem. If the power supply is internal replace the capacitors coming out of the voltage regulators. These are usually 1000mf and/or 470mf. If that doesn't do the trick look up the numbers on the 8-pin chips that drive the secondary transformers on the inverter to see if they are getting the right voltages.
Good Luck!

Posted on Feb 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viewsonic v1930wm


Sounds like the unit needs repair.

Jun 23, 2014 | ViewSonic VX924 19" LCD Monitor

1 Answer

VX924 (Silver, Black) 19" LCD Monitor: monitor has suddenly gone white...


My VX924 did the same thing but now displays nothing and power switch light just blinks. According to an answer listed on previous page, it may have bad capacitors. I may have to take a look at them. Viewsonic repair facility examination of this monitor runs $70.

May 17, 2010 | ViewSonic VX924 19" LCD Monitor

2 Answers

Monitor is black, power line flashing. Help


I assume you mean the power light is flashing? This means that there is aconnection problem or your video card/chip is faulty. Check both of the VGA cable (monitor & PC) are securely connected and there are no bad twists or bends in it, if so replace it. If both ends are secure and cable is o.k. then it is likely that the video card/chip is faulty and needs replacing. Best of luck. Ian.

Mar 29, 2010 | ViewSonic VX924 19" LCD Monitor

1 Answer

Blinking


change all control panel switch in frount

Mar 19, 2010 | ViewSonic VX924 19" LCD Monitor

1 Answer

My monitor(Samsung Model-540N,TFT) starts blinking.


Often problems with LCD monitors can be traced to bad capacitors. The following sites will help you identify if your monitor has bad capacitors, and how to replace them.

www.fixyourmonitor.com and http://www.youtube.com/watch?v=9Q6_TgNJvQw

Good Luck!

Feb 09, 2010 | ViewSonic VX924 19" LCD Monitor

1 Answer

My ViewSonic VX924 flashes the green power light off and on when I try to turn it back on after it has been off for a while. I can get it to work again by disconnecting the power in the back then...


I had several monitors do this. They start blinking on and off for a while until they warm up. It takes longer and longer for them to warm up, then eventually they never stay on and blink forever. In my experience, it has been the capacitors on the power circuit. You can fix it with a little soldering and about $1 worth of capacitors. For photos and a guide, look here: Fix an LCD Monitor

Feb 04, 2010 | ViewSonic VX924 19" LCD Monitor

2 Answers

Viewsonic vx924 power/inverter board


See ebay item 390074135923
http://cgi.ebay.com/2-Inverter-transistor-viewsonic-VX910-VX924-DK-QB-QO-QA_W0QQitemZ390074135923
Fran

Jul 23, 2009 | ViewSonic VX924 19" LCD Monitor

1 Answer

ViewSonc VX924 LCD Monitor


Check the information at Viewsonic's website regarding their warranty:

http://www.viewsonic.com/support/warranties/limited-warranty/

If you have your proof-of-purchase and it shows the monitor is less than a year old, it would be covered. You would need to follow the procedure on their website to have the unit repaired or replaced, but it would not be your job to try to fix it.

Feb 11, 2009 | ViewSonic VX910 19" LCD Monitor

2 Answers

Won't turn on


Could be a power supply issue. Maybe it's not getting enough voltage from the power supply unit. Could also be some bad solder points on the circuit board, or maybe a burnt capaciter.

Oct 04, 2007 | ViewSonic VX924 19" LCD Monitor

Not finding what you are looking for?
ViewSonic VX924 19" LCD Monitor Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computer Monitors Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a ViewSonic Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...