Question about Remote Controls

1 Answer

Sharper image universal remote

Trying to connect to Sanyo HD TV DP37647
Can't figure out code for Sanyo TV for universal remote

Posted by on

  • 1 more comment 
  • Anonymous Mar 13, 2014

    I have A DP 1649 Sanyo TV and a Bightstar BR100-d remote what code do I use

  • Anonymous Mar 15, 2014

    Hi, my Sanyo tv Model cj21fs2 Remote is no longer working. I'm looking for a replacement. Could you tell me the Romote Model No. or suggest a compatible Remote for it.

  • Anonymous Mar 29, 2014

    ok so my Sanyo tv has no power button so how can connect my remote if I can't turn my tv on manually ? plz help

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

1) Turn on TV;
2) Press TV on the remote control;
3) Press and hold SETUP, until the red LED indicator blinks twice;
4) Enter 9-9-1-1 on the numeric keypad;
5) Press POWER on the remote;
6) If the TV doesn't respond, repeat #3, #4, #5.

Posted on Feb 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DIRECT TV codes missing for sharper image universal remote


Here is a link that can show you the process,www.directtv-advisor.com/direct-tv-remote-code. hope this helps..

Mar 27, 2010 | Remote Controls

1 Answer

The sharper image jumbo universal remote jvc tv


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/

Jan 04, 2010 | Remote Controls

1 Answer

Programming


i need codes to jumbo sharper image universal remote

Jan 27, 2009 | One For All URC-9910 LCD Remote Control

1 Answer

INSTRUCTIONS NEEDED FOR THE SHARPER IMAGE - JUMBO UNIVERSAL REMOTE


Hello kls1996... programming your remote is rather easy. The easiest way (thanks to The Sharper Image Jumbo Remote being a LEARNING SMART remote) is to do the following:

1 - Point the head of your Sharper Image remote at the head of your Sanyo TV remote (nose to nose so the clear bulbs on each remote are facing each other).

2 - Press the "TV" button on your Sharper Image remote (located in the upper left-hand corner).

3 - Hold the "LEARN" button on your Sharper Image remote (located in the left edge under the volume buttons) until the red light flashes.

4 - Press the key on your Sharper Image remote (e.g. Volume Up or +VOL)... the red light will go solid (indicating that it is waiting for a signal from the other (in your case Sanyo) remote.

5 - Press the key on your other remote (in your case the Sanyo remote) that you want programmed in your new Sharper Image remote... the red light will flash rapidly again.

6 - Repeat step #4 until you have programmed each key.

7 - When done... press the "LEARN" key on your Sharper Image remote. Your Sharper Image remote should be programmed to operate your device (in this case, your Sanyo TV).

NOTE: You can program other devices such as your VCR, DVD, VHS, SAT, CABLE, etc. and not just one device.

Dec 27, 2008 | Remote Controls

19 Answers

INSTRUCTIONS NEEDED FOR THE SHARPER IMAGE - JUMBO UNIVERSAL REMOTE


The "auto" mode isn't quite presented correctly in the documentation or posts I've seen...after MUCH trial and error (and about 3 hous) I've been able to set-up ANY infrared device, either by "auto" or learn. (Although maybe not "fully".)

AUTO Method

1. Press & Hold (about 3 sec.) the [DEVICE] button on the JUMBO Remote....llight will stay solid.
2. Now just press the [POWER] button (only) ONCE while pointing at the device...it will start sending codes approximately every second. (Don't keep pressing the power button as instructions indicate.)
3. TIMING IS EVERYTHING HERE. (It may take 5 minutes to find your devices code.)
4. AS SOON AS the power goes off...press the [ENTER] button on the JUNBO Remote.
5. Now pressing the [POWER] button should power up/down the device.

---- any buttons not programmed will have to be handled using the LEARN method ---

LEARN Method

1. Press & Hold (about 3 sec.) the [DEVICE] button on the JUMBO Remote....it'll stay solid.
2. Press the [LEARN] button on the JUMBO Remote. (light will immediately blink rapidly.)
3. Now Press the {NEEDED} button to program. (light will stay solid)
4. Now (1 to 2 inches away) have the ORIGINAL Remote pointed at the JUMBO Remote and press the {DESIRED} button on the ORIGINAL Remote.
5. It blinks rapidly while sending...then a slower steady blink once "LEARNED" correctly.

*** Not all buttons work properly with the "LEARN method". Some you will need to "associate" with an alternate button on the JUMBO Remote. ***

I sincerely hopes this helps anyone & everyone.

Feb 09, 2008 | Remote Controls

4 Answers

Sharper Image Jumbo Universal Remote


i just pirchased a Sharper Image Jumbo universal Remote but i can't find a code for the Pioneer DVR 541H is DVD recorder. Does anyone have this code or  a suggestion?

Jan 10, 2008 | Remote Controls

12 Answers

Jumbo Universal TV Remote (Sharper Image-Innovage)


sharper image jumbo remote can't get it to program my philips/magnavox tv.

Dec 25, 2007 | One For All URC-9910 LCD Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

870 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Are you a Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...