Question about Barebone Systems

1 Answer

My printer does'nt print from the web and it wont print any colours at all from anything else. I have reinstalled it and put new ink cartridges in. There is no problem solving advice for this in the paperwork or on screen. Can you help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks for the offer but I found the problem was due to dirty terminals on the ink cartridges, I ran them under the hot water tap and this cured it, (a friends suggestion).

Posted on Feb 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson stylus rx 425, just cahnged catridges and printer wont recognise this, catridge red light permanently on. help! printer wont recognise cartridge


Try to left up your new cartridge, and reinstall it. chances are your installation of the cartridge is just loosened. If your printer still won't recognise your print cartridge, there might be a problem with your printer motherboard in recognising your cartridge.

Apr 08, 2008 | Barebone Systems

1 Answer

No text


Check that your black ink cartridge has ink inside, eventually try a new cartridge , as ink may have dried up in old cartridge.
If you use a new cartridge ensure you removed cellotape from cartrige.
If cartridge is ok, then it is printer nozzle/head for black ink.
In this case do nozzle check / head cleaning in printer tools a couple of times.
If problem persist you may need to check and clean printer's head with cotton and solvent.

regards

Mar 20, 2008 | Barebone Systems

1 Answer

Colour prints not satisfactory


D_foofat,
This link will take you to instructions on cleaning your Cartridge Print Head: http://h10061.www1.hp.com/ccsearch/search?method=viewDocument&redirUrl=http%3A%2F%2Fh10025.www1.hp.com%2Fewfrf%2Fwc%2Fdocument%3Fdocname%3Dc00285228%26cc%3Dus%26lc%3Den%26dlc%3Den%26product%3D402150%26dlc%3Den%26lang%3Den&docId=document%28c00285228%29&uqry=&cqry=clean+printhead&ctry=us&dlc=en&lang=en&qry=clean+print+head
I hope it helps, and Good luck.

Mar 16, 2008 | Barebone Systems

1 Answer

INSTALLED NEW CARTRIGES AND PRINTER WILL NO RESUME PRINTING


hi maggievalley,

I need you to make absolutely sure that you followed the installation procedure of the cartridges correctly. Some manufacturers put a kind of tape on the cartridge when it ships from their factories to prevent ink from leaking out of the cartridge during transportation. This tape must be removed prior to installing the cartridge in a printer to allow the ink to flow out of the cartridge.
I suggest you remove the cartridges from your printer and reinstall them following the new cartridge installation guidelines of your printer's manufacturer step-by-step.

Hope you find this information helpful in solving the printing problem and thanks for using the FixYa service
Kind regards

Mar 08, 2008 | Barebone Systems

1 Answer

Eratic printing of colour pages


probably needs an alignment test as well as a colour check.

Failing that try using a new ink cartridge.

Hope this helps

Feb 14, 2008 | Barebone Systems

1 Answer

Can't print in colour


Hi Paddy,
It sounds like the color ink cartridge is clogged. You can try taking the color cartridge out, and take a paper towel and some windex with amonia. Spray the paper towel with the windex and then take the color cartridge, and wipe the bottom of the ink cartridge. After wiping the bottom of the cartridge, try pressing on the bottom of the cartridge (Print head) with the paper towel...You should start seeing some ink soaking into the paper towel. If you do not see any ink on the paper towel, then try wiping it again with the windex/paper towel. If after a couple tries, you can not get the ink to flow from the print head, then I would suggest getting a new cartridge.
The HP ink cartridges can get a bit tricky and the print heads will clog when the printer is left sitting for a long period of time.
Hope this helps.
Good luck.
If you have any other questions, feel free to post them.
IF I have helped answer your question, please remember to leave a feedback and or rating for my suggestion.
Mac =)

Feb 13, 2008 | Barebone Systems

1 Answer

I have a Canon Pixma IP 5000 inkjet printer and am using Mac OS 10.3.9. It has 5 ink cartridges: 2 black (3e and 6) and one each yellow, magenta and cyan. I use it all day every day. After printing...


Thanks for getting back to me.
Sorry this ain't a solution but it seems to be the only cash-free way to contact you. No problem not solved - though I have tried everything. Dismantled the printer; washed, dried and replaced the waste ink pads; washed the print head; blew compressed air through the print-head sponge; replaced the cartridge 3 times; printed hundreds of test prints. I can't think of anything else to do and so I think the only solution is to replace the printhead (probably not even available) or replace the printer. The latter is looking most likely.

Feb 10, 2008 | Barebone Systems

1 Answer

We just attached the macbook to the hppsc 1350v all in one printer and new print cartridges. When attempting to print, message reads"color print cartridge not compatible with this printer". We know we have...


Hi,

Just to confirm pls:
1. the new print cartridges are original HP inks;
2. you have remove the bright pink tape from the ink cartridges;
3. the black is on the right side and the color is on the left side.

You can try removing both cartridges and clean the gold colored contacts where the pink tape was. Pls do the same to the mate pins in the cartridge holder in the printer.

Try again. If this does not be corrective, you may need to change inks again.

Hope this be of help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Feb 02, 2008 | Barebone Systems

1 Answer

Printer Problems


ok" take cartriges out of printer , water on clean cloth make it damp, wipe ink heads, take a pencile with eraser , use eraser on printed circuite on the back of cartidges to clean contacts, use eraser back and forth, wipe with cloth , put it back in the printer . may have to run printer tools to clean cartridges also

Jan 21, 2008 | Barebone Systems

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...