Question about Mag Innovision InnoVision 786 PF 17" CRT Monitor

1 Answer

MAG 786PF - Does its resolution good for Digial camera?

I have problem with my CTR screen and I want to buy from a second hand this screen, but its important that I will be able to use it with my new canon digitan camera.

Please let me know to my e-mail: limori@aradtextile.com

Thanks
Limor

Posted by on

  • Anonymous Jul 14, 2008

    ghjvjhj

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 198 Answers

Sounds like an inverter problem. If the power supply is internal replace the capacitors coming out of the voltage regulators. These are usually 1000mf and/or 470mf. If that doesn't do the trick look up the numbers on the 8-pin chips that drive the secondary transformers on the inverter to see if they are getting the right voltages.
Good Luck!

Posted on Feb 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adjust the video height on MAG lt716s computer monitor


don't worry overly, the shapes of things will be altered as you change the resolution. The main preset resolution s have different
aspect ratios

1920 x 1080 is 1.77/1

1600 x 1200 is 1.33/1


you change aspect ration according to your selected resolution.

Your monitor will have a native resolution at which everything looks normal, .......If you vary from that resolution things will obviously change.

Jul 16, 2015 | Computers & Internet

2 Answers

MAG LT1919W Wide screen flat panel monitor


check for a different cable problem sir

if no the leave the monitor plugged off from wall power for one night and check if it works

Aug 03, 2008 | Mag Innovision Computers & Internet

1 Answer

Message states mode not supported


If you are talking about dual screen mode, some monitors do not support this. And some do not support dual screen at the current resolution setting. Play with the resolution by right clicking an open area of your desktop, then click properties, and then advanced. There should be a slider indicating resolution (in xp at least) After that, then the monitor itself does not support dual screen. Best of Luck to you!

Jan 17, 2010 | Mag Innovision LT776s 17" LCD Monitor

1 Answer

Just bought an Acer AL2216WBD flat panel monitor. Have an old Dell computer; "Jewel Quest" game loaded. When I plugged in the new monitor, tried to play the game. Good sound but no picture. Only "input...


the resolution is incorrect for that new monitor , it does not support it, attach the old monitor reduce the display resolution and then hook in the new monitor, up the resolution until it fails again and do nothing it will reset to the last good display resolution and you can leave it there.
hope this helps

Mar 06, 2009 | Acer X193W LCD Monitor

1 Answer

LT582s Mag Innovision


Hi,

It all depends if the Mag has been used before on the same system or it is a new installation or on a different computer.
  • If it is connected to an existing set-up and has been used previously, then possibly it is the computer's video card/memory or just not booting. Alternately, it could be the video interface/main board of the monitor or even possibly the cable;
  • If it is just being installed on a known good computer, then it could be that the screen resolution and/or the screen refresh rate of the display properties of the computer needs to be lowered down.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Nov 05, 2008 | Mag Innovision LT576s 15" Flat Panel LCD...

1 Answer

HDTV on Mag LT776s


that monitor wont produce the 1280x720 resolution. It isnt hdtv ready

Aug 07, 2008 | Mag Innovision LT776s 17" LCD Monitor

1 Answer

Mag Innovision LT982s screen problem


Hi,

Based on your post/description, I will initially suspect the inverter and/or the CCF Lamps since as you posted "dim screen picture" indicating that there is ** backlight(s) and/or it is **t receiving power from the inverter.

If the unit is relatively new and under warranty, it may be to your advantage to have it replaced or seek the services of their Service Center. Should you want to do a DIY, it would be required that you be familiar with electronic circuitry and components, use of a DVM and a soldering iron and access to a service manual or at least a schematic diagram.

Incidentally, there are k**wn cases where similar issues could be resolved if you try lowering your display properties (resolution and refresh rates) but that would also include the powerlight changing colors.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Mar 09, 2008 | Mag Innovision LT982s 19" Flat Panel LCD...

1 Answer

Does the MAG LT-456s require drivers


Perhaps your screen resolution is set too high. Try using a different display to set your resolution to 800x600, then attach the MAG display. Adjust from there once it is working...

Mar 08, 2008 | Mag Innovision lt456s 14" Flat Panel LCD...

7 Answers

MAG Innovision LT1919WDb flat screen goes black


I had the same problem. I contact the manufactuer and they refused to fix it. They said it would cost an additional $100 to have it fixed. I have not even had it a year. I thought products sold in America were suppose to last longer than a year? What has happened to companies standing behind there products. Beware of this monitor!!! DO NOT BUY IT!!! LT1919WDB

Jan 30, 2008 | Computers & Internet

Not finding what you are looking for?
Mag Innovision InnoVision 786 PF 17" CRT Monitor Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mag Innovision Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

kakima

Level 3 Expert

98749 Answers

Are you a Mag Innovision Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...