Question about EliteGroup P4VMM2 Motherboard

1 Answer

Technika digital camera driver issue

Hi,
We have a Technika digital camera and when i try to install driver half way through running insterlation it tells me i need to run in administrater then stops.Computer is running in admin.

Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

This isnt a motherboard problem actually.

The user you are useing to run the setup doesnt have admin rights.

Try makeing a new user and make sure it is set to computer administrator. If you cant do that then your user doesnt have admin rights.

If you can do that then go to the new user and try to run the setup on it.

Its possible your pc has a virus or something has removed administrator rights from your user.


how to check does my user have admin rights?
press start -> run -> type: cmd -> type: whoami
it will show something similiar to this:

C:\Users\Käyttäjä>whoami
lh-g503w30x9mwi\käyttäjä

(''computer name'' \ ''user'')

now type: net user käyttäjä
(remember to change the 'käyttäjä' with your own username)

it will show something similiar to this:

C:\Users\Käyttäjä>net user käyttäjä
User name Käyttäjä
Full Name
Comment
User's comment
Country code 000 (System Default)
Account active Yes
Account expires Never
Password last set 11.1.2008 11:30:25
Password expires Never
Password changeable 11.1.2008 11:30:25
Password required No
User may change password Yes
Workstations allowed All
Logon script
User profile
Home directory
Last logon 17.2.2008 13:01:20
Logon hours allowed All
Local Group Memberships *Administrators
Global Group memberships *None
The command completed successfully.

C:\Users\Käyttäjä>

Note I bolded the LOCAL GROUP MEMBERSHIPS. Seems I have administrator rights in my pc. how about yours?

Posted on Feb 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a new sakar digital concept webcam, however i have a mini computer with no cd rom drive. i need to install the driver needed for my camera...


Go to the manufacturers website on the internet and download the drivers you need to your mini computer. Save them. Then install them. You should be able to find the drivers by running a search on the internet for Sakar Digital Webcam.

May 09, 2011 | Computers & Internet

3 Answers

I just purchased a Matrox DualHead2Go Digital Edition for my MacBook Pro. I have followed the installation instructions correctly (to the best of my knowledge) and I can't get the external displays to...


http://www.opendrivers.com/driver/290211/matrox-dualhead2go-digital-edition-software-utilities-1.01.00.005-mac-os-x-free-download.html
I suspect that you didnt install any driver for it ..and this may cause the issue..This is not a plug and play device and need a driver to work ..If you do not have a driver for mac on the disk here is something that may work ..download it ..and run it ..and after that try to configure from the software ..It may be needed to lower the resolution to a max of 1360/768...but for a normal 19 inch monitor ..it will be enough 1152/864 ..this will be the best choice ..

Jan 01, 2011 | Computers & Internet

1 Answer

Hello, My computer is a dell labtop with windows XP. It will not allow me to plug in my usb for my camera or my new vivitar digital key chain usb to upload pictures. As soon as I plug the usb into the...


try connecting to a different usb port and if still that happens ...remove the motherboard drivers and restart the system and than plug in the camera if it doesnt restart install the drivers again from the dell support website ... support.dell.com u have to put in ur service tag and than down load the drivers required and see if the issue is resolved or not if not than u have to reinstall windows

Dec 24, 2010 | Computers & Internet

1 Answer

Run win 7 with intel D 845 GBV board


i would download the windows xp vga driver first and try installing in compatabilty mode (rite click the installer then select properties then choose run in xp mode and run as adminastrator) i belive ur system is a AGP one so u neeed a half decent AGPx8 graphics card these are quite old now you would probally be best checking a well known online auction site for 1

Mar 11, 2010 | Intel Motherboard

2 Answers

Ive recently upgraded to windows 7 but my computer has no sound


Hi,

There is issue with sound driver so pls install the sound driver which is Vista compatible.

Nov 18, 2009 | ASUS P5S800-VM Motherboard

2 Answers

Usb stops working after 5mins or doesnt work at all


Hi,

Plug it back in and see "how many drives" are created. Some flash/usb drives create two drives when plugged in. When this happen open up both of them and one of them will allow you to save information. Try finding drivers for it. Update it. Thank you.....

Jan 28, 2009 | Foxconn WinFast K7S741MG Motherboard for...

1 Answer

Driver for technika digital cam for Vista OS


you are using vista i think that  is inbuilt drivers please confirm by checking with your ditital cam by using usb, your vista is inbuilt with your webcame drivers you got a message in taskbar " found a new hardware device " ofter that you can go " control panel -> Scanner and Cameras icon double click there..

       If your vista not inbuilt the drivers are available in the following website..www.google.com.. type your model name you'll get some drivers website.. click and download it . 

Nov 11, 2008 | EliteGroup P4VMM2 Motherboard

3 Answers

Techweb driver


Having a similar issue with another Tesco Technika product here myself (Digi-cam SH-A366).

Whilst looking about, I have found the following that lists some drivers for Tesco Technika products: http://direct.tesco.com/content/specials/technika.aspx

Whilst this link has not helped me any, it does include the techweb driver that should help out.

Dec 07, 2007 | EliteGroup P4VMM2 Motherboard

Not finding what you are looking for?
EliteGroup P4VMM2 Motherboard Logo

579 people viewed this question

Ask a Question

Usually answered in minutes!

Top EliteGroup Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

David
David

Level 3 Expert

761 Answers

Are you an EliteGroup Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...