Question about Projection Televisions

1 Answer

My remote control doesn't work - Projection Televisions

Posted by on

  • 1 more comment 
  • Anonymous Aug 23, 2008

    I replaced my remote and it still doesn't work. Was told it could the remote sensor in the TV.

  • SexySweet Nov 26, 2008

    i seem to be having the same issue with my television and we have already tried you solution but it doesnt not work. We have the orignal remote and a universal remote both were linked and niether seem to work......... any solutions?

  • Stowelini Mar 19, 2009

    I got new batteries for the remote. The remote is the original. It was working one minute and now... nothing. Very frustrating. I tried more new batteries, but nothing. I was trying to check options on the menu to see if something was wrong, but I'm not sure I'm checking the correct things.



    Any ideas.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Projection T... Master
  • 5,138 Answers

Go to dollar store buy 4in1 RCA remote 5.00. ThankYou for using FixYa. Have a Nice Day.

Posted on Feb 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

KP-46WT500 46 in. Rear Projection HDTV-Ready Television convergance adjustment


Try using the MENU button on your remote control to go into the TV picture settings menu. Change the mode to NATURAL, You can also try to manually adjust the color in the COLOR SETTINGS mode.

If that doesn't work, check out the handy troubleshooting chart in TV color problems and see if another solution will work. I hope this helps!

Sep 13, 2012 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Have a proscan ps50700 that wont show the picture, will turn on but turns itself right back off. what could it be


TV Doesn't Turn On
  • Your RCA rear projection TV may not turn on from time to time for several reasons. First, check that the power cord is plugged into a working power outlet. Check that the outlet is receiving electricity by plugging a different device into the outlet. If the other device doesn't work, you may need to replace a fuse or reset a circuit breaker in your home.

    If you tried using the remote control to turn on the TV, press the "Power" button on the front of the TV. You may have a problem with the remote control if the TV turns on.

    If you tried using the front control panels and haven't tried the remote, press the "Power" button on the remote control. The television controls are blocked if the TV turns on with the remote. To unlock the controls, open the "Parental Control" menu and remove the check mark next to "Front Panel Block."

    Finally, your TV may be performing a diagnostic check. These checks are used to find any errors in your TV. Wait a few minutes before trying to turn on the TV again.

TV Turns Off By Itself
  • You may find that your RCA TV turns off by itself on occasion. This is often because the "Sleep Timer" feature was enabled. This feature allows you to place a timer on the television that will turn it off after a specific amount of time has passed. The feature allows you to save on your energy bill and extend the life of your television.

    If the "Sleep Timer" wasn't set, the television may have detected a power surge in your home and shut off automatically to protect the components of the television. Wait at least 30 seconds before turning the TV on again.

    Finally, if you suspect the television is turning off for a reason other than a power surge, unplug the television and let it sit for at least 10 minutes. This will clear any errors in the television. After 10 minutes, plug the television back into the outlet and resume normal use.

  • Blank Screen
  • A blank screen on an RCA rear projection television is usually caused by a loose connection or an incorrect setting. Check that the coaxial connection on the back of the television is secure or, if you're using an external device such as a DVD player, the video cables are secure. Press the "Ant/Cable" button to switch between tuners if you are watching television, or the "Input" button to switch between input channels if you're watching something from an external device.

Apr 21, 2012 | Proscan PS60690 60" Rear Projection...

1 Answer

My GE universal remote for RCA Scenium tv doesn't work the DVD part


If this is a combo unit (TV with DVD built in) you need the original remote---Universals almost always are missing key features the original remote had as most companies have someone else make the unit and put their name on it.

Mar 21, 2012 | RCA Scenium D40W20 40" Rear Projection...

1 Answer

The volume on my tv will not turn down. when i manually try to turn it down, it continues to go to full volume


Take the batteries out of all remotes that could control your T.V.s volume. Try turning it down. Try pushing the up button on T.V. to see if it's stuck. This T.V. doesn't really have a lot of digital controls, so it's probably a mechanical issue.

Dec 22, 2011 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

I cant turn tv on with remote


Maybe the problem is in the remote. To check the remote use a cellphone camera or maybe a digital camera will do. Just focus the camera on the remote LED it is located on the top of your remote, while pressing the buttons of your remote put the camera on the LED if the remote is good you will see a blinking lights on the camera while pressing the buttons of the remote. If the light doesn't show try to replace the LED on your remote or maybe just clean it also clean the button panel with a pencil eraser, Usually the remote control is the problem, Hope this may help you if the problem still exist just email me...

Aug 14, 2011 | Toshiba 57H81 57" Rear Projection...

1 Answer

I need a remote code for a rca remote for the olevia remote control can you help


Unfortunately Olevia is one of those t.v. brands that is not compatible with many universal remote controls. They make a Universal Learning Remote specifically available from Olevia on their web site that may solve your problem if your universal remote control turns out not to be compatible with your Olevia television.

As for what codes you can try, there are many, and the codes depend on your universal remote control brand. Many times, an RCA code will work for Olevia televisions, so you should try the RCA codes that come with your universal remote first, before trying any of these other codes.

If you have a Dish Network Universal Remote you can use code 506 or 127.

Direct TV remote codes vary by model number on the remote control, but the following codes work with most Direct TV remotes: 506, 127, 11144, 11240, 11331, 11610

Cable Vision use code 506

Charter and Movie Box remotes you can use 1144 or 1178

Comcast codes are 11144, 11240, 11331, 21075, 10159, 10154, and 10088

Cox code is 1610

Brighthouse remote codes are 1610, 1144, 1240, and 1331

Time Warner remote codes are 1610, 1144, 1240, 1331, 432, and 1610

If none of these brands are what you are looking for as far as your Universal Remote Control is concerned, many universal remote controls will work with Olevia televisions if you use the codes found under the RCA, LG, Phillips, and Yamaha in the code listing included with your remote control.

Jul 25, 2009 | Projection Televisions

1 Answer

Don't have a remote control for this lxi projection television purchased at garage sale, not getting channels, can only view movies


hi, doesn`t have tv/video button on front of set ? LXI is a sears trademark, bring complete model number to any sears repair center and they can get you a remote for it, gl, video-tek

Jun 04, 2009 | Projection Televisions

1 Answer

Where is the eye for the remote on the TV????


Hi, remote sensor is located behind the front screen, if the remote doesn`t work as well (you didn`t say so I`m assuming it doesn`t) then you either have bad tact switches on the control board (the buttons on the front of the set) or the 5 volt line to the control board is missing, video-tek

Feb 03, 2009 | RCA P52937 52" Rear Projection Television

1 Answer

We have been given a new remote control but the volume does not work and when we try to turn over it works for ma minute then stops working altogether


Hi, I think you have a something (an object or liquid) inside the buttons that is causing a short on the remote control board. When you turn the remote control over, the object does not touch the remote control board, this is why the remote control works. I would turn the remote control over and just tap on it firmly a few times. if that does not work, then you might use a blow dryer on the remote control Key. Let me know the outcome so that I can further assist you. Thanks, Mike H

Nov 02, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...