It doesn't appear on my computer

hmm it might be lock from pass code?
try to plug it into a computer oh but you'd have to install drivers to be reconize and you'd have to set printer to PC mode to reconize.

This is a reall pain,computer technology is bad in certain areas and a bad usb will render the pc useless,problem is the usb are soldered to the mother board and any extraneous movement whilst plugging in breaks these soldered connections,you can repair it if its not to serious but it will probably only break again--inherent design fault---Davey

Either the port on the computer is bad or the memory stick is bad.

If you are using a usb port to plug in the memory stick, try another usb port.

Try plugging the memory stick into another computer to see if it works or if it is bad.

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

You need to download and install the drivers for your audio, it's not that the speakers aren't recognized, it's the sound card, or on-board audio, whichever you have, that's not being recognized.

Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use Nikon Transfer or any other photo cataloging program.

how can i fix my hug mp3 is loading displayed pls .

If you need additional USB ports, the best way to go is to get a USB card that fits into the computer. That way it comes with a CD software program and can be updated. They are now USB 2 configured and work great. I have had to remove a number of USB hubs to fix other computers that have had the same problem.
Hope this info is of some help. Bud

Making sure that it is or is not being recognized. Click on Start at the bottom left corner of your computer. Then click on Computer , and then look under "storage devices". sometimes the name is different, so look under the one that did not appear before.

Firmware version was too old to be reconized by new version of My Sirius Studio (MSS). Put Stiletto into recovery mode, pulled the latest driver from sirius, updated, which allowed MSS to see the unit.