Question about Whirlpool LSR6232J Top Load Washer

1 Answer

Washer won't move into spin phase on the Regular Cycle setting.

Whirlpool Heavy Duty Super Capacity Washer stops at spin in the Regular Cycle. Even when I try to manually move into the spin setting and pull out on the nob - nothing. However there aren't any problems with the Delicate or Permanent Cycles.

Posted by on

  • Novice4 Feb 19, 2008

    I was thinking that if the spin settings on the Delicate and Permanent Press Cycles were working fine that it would eliminate the lid switch as a source of the problem. I will try as you suggest and let you know what happens.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 770 Answers

Have you checked the lid switch??? This will prevent it from spinning look on the lid you will see a plunger.. watch where it goes down to you can use a pen to press the sw while the lid is up to see if it is working ...PS: dont forget to set it into the spin cycle first..let me know what happens

Posted on Feb 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a Whirlpool Heavy Duty-Super Capacity Plus, 7cycle/2 speed. Model LSR7200EQO , the agitator stopped working


My whirlpool heavy duty 2 speed 7 cycle washer machine stopped working, It fills up and aggitates for the first cycle then when it should drain and spin it doesnt drain nor spin

Jun 05, 2010 | Whirlpool LSB6200KQ Top Load Washer

1 Answer

My washing machine won't spin!


as with basic spin faults -a number of reasons usually 1 motor brushes, 2 motor 3 motor control pcb or the obvious one - the belt has come off.

Mar 13, 2009 | Whirlpool 3.2 cu. ft. Plus Washer

1 Answer

Washer spin & gurtitate no working


Coupling is broken that connects motor to transmission. Replace it. Please contact me if you need further help or leave feedback if appropriate as that is how I get paid. Thanks for letting me help you!

Nov 30, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Won't spin or agitate


coupling.between motor and gearcase.

Nov 11, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

3 Answers

Whirlpool Washer Model LSL9244EQO


shut off water remove rear hoses pull screen from inside opening and clean ..BE SURE TO REINSTALL SCREENS..if still slow or stopped altogether replace fill valve..remove rear screws in console lift and roll console back unplug lid switch pop the clips on each corner up and off cabinet will lift off valve is top right side

Aug 06, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Whirlpool LSR6232J Top Load Washer Logo

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...