Question about Magellan RoadMate 700 GPS Receiver

1 Answer

Roadmate760- freezing I recently downloaded the V6 upgrade and followed all the downloading instructions to the letter. Once my computer indicated the download was completed, it instructed me to disconnect the usb port but not the power supply to the unit. On the unit the word "loading"was displayed. The instructions also warned not to touch any buttons until the units system had completed it's download (or something). After almost 3 1/2 hrs. the "loading" word was still on the screen. I felt this was taking an extremely long time and thought that the system was malfunctioning . I pressed the power button and everything shut down. Since that procedure I haven't been able to power up the unit. Is there some way to re-start (boot) the system and how do I know if the new download was completed? Your help would be appreciated. Paul Ouellet

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 50 Answers

Some CD that came with it hopefully. If you do, then you may be able to stay alive here. Once your system boots to the user screen.. press + and repeat key at the same time.. "secret" menu now. ONLY IF YOU HAVE SOFTWARE TO INSTALL!! Select NAND FLASH FORMAT.. The unit will shut down after formatting. start up your software installer on computer. plug usbRoadmate760- freezing - 1.gif in.. and power on unit. This fix isn't %100, but it's the best shot you have. OR.. you could call customer service and see what they have to say. you'll probably be transferred to overseas.. or get a new mastreo series 4000 or higher.the 700 is no longer servicable that was at the magellan website

--good luck with that

Posted on Feb 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i upgrade my Garmin nuvi 1300?


Download garmin web updater from here Updates Downloads ,install on your pc,run program and follow instructions.Be sure that your battery is fully charged before update.

Jul 27, 2014 | Garmin GPS

Tip

Motonav TN20 Firmware Download


Motorola Motonav TN20 Firmware Download

a0d0990.jpg

Does you Motorola Motonav TN20 GPS lock up, freeze, or not load properly anymore? Replacing the system software / firmware of your Motorola Motonav TN20 GPS will fix these and other symptoms of corrupted firmware. Satellite reception is also improved with newer firmware.

Follow these steps to download the firmware / system software of your Motorola Motonav TN20:

1. Head to Motorolas webpage to download the system software.

2. You will presented with this screen:

4352116.jpg

3. Find and enter your Motonav's serial number. Review the picture below to find the correct number on the label.

a57aa7a.jpg

4. Pause for moment and consider the Purchase Date. If you enter a date here beyond the covered warranty period of your Motonav TN20, you will see this screen:

6154b3f.jpg

Since the default year of this screen is 2007, I recommend choosing a more recent year. Many people complain that they didn't notice this and get themselves locked out of what they should be entitled to.

5. Enter the Purchase Date, click Submit, and save the file somewhere on your computer.

The software download procedure is now complete. Follow these steps to install the new system software for your Motorola Motonav TN20.

I hope that helps.
_______________________________________________
Motorola Motonav TN20 Manual Download
Motonav TN20 Firmware Fix
Motonav TN20 Upgrade Manual

on May 06, 2010 | GPS

Tip

Motonav TN20 Firmware Download


Motorola Motonav TN20 Firmware Download

a0d0990.jpg

Does you Motorola Motonav TN20 GPS lock up, freeze, or not load properly anymore? Replacing the system software / firmware of your Motorola Motonav TN20 GPS will fix these and other symptoms of corrupted firmware. Satellite reception is also improved with newer firmware.

Follow these steps to download the firmware / system software of your Motorola Motonav TN20:

1. Head to Motorolas webpage to download the system software.

2. You will presented with this screen:

4352116.jpg

3. Find and enter your Motonav's serial number. Review the picture below to find the correct number on the label.

a57aa7a.jpg

4. Pause for moment and consider the Purchase Date. If you enter a date here beyond the covered warranty period of your Motonav TN20, you will see this screen:

6154b3f.jpg

Since the default year of this screen is 2007, I recommend choosing a more recent year. Many people complain that they didn't notice this and get themselves locked out of what they should be entitled to.

5. Enter the Purchase Date, click Submit, and save the file somewhere on your computer.

The software download procedure is now complete. Follow these steps to install the new system software for your Motorola Motonav TN20.

I hope that helps.
_______________________________________________
Motorola Motonav TN20 Manual Download
Motonav TN20 Firmware Fix
Motonav TN20 Upgrade Manual

on May 06, 2010 | Motorola Mobility MOTONAV TN20 GPS...

1 Answer

Nuvi255W freezes up after 2 or 3 letters when spelling a point of interest.


update your units firmware by download garmin webupdater from http://www8.garmin.com/products/webupdater/howtoinstall.jsp

Download the program, install and run it. Follow the onscreen prompts to get your unit updated and it should clear up any freezing issues.

Sep 24, 2011 | Garmin nuvi 200W GPS Receiver

1 Answer

How do i upgrade my garmin nuvi 200 gps? (never been upgraded


Hello,

Download and install the Garmin commuicator plugin to your computer
http://www8.garmin.com/products/communicator/
This will allow the nuvi to transfer data back and forth to Garmin's server.
Connect your nuvi to your computer and run the Garmin WebUpdater to update the software on the nuvi.
Download and Install WebUpdater.
To update the mapping, you will need to purchase a map update subscription.
https://my.garmin.com/maps/chooseDeviceType.htm?
Once the subscription is activated and registered to the nuvi, follow the download instructions to download the map. This will usually take from 3 to 4 hours or more depending on your internet download speed.
The nuvi 200 is a discontinued model and you may want to consider upgrading to a new GPS as a new nuvi with lifetime mapping can be purchased for about $150.00.
http://www.gpscity.com/garmin-nuvi-1390-lmt.html

For further assistance you may want to contact Garmin support.
http://www.garmin.com/us/support/contact

Aug 14, 2011 | Garmin nuvi 200W GPS Receiver

Tip

Motonav TN30 Firmware Download


Motorola Motonav TN30 Firmware Download

a0d0990.jpg

Does you Motorola Motonav TN30 GPS lock up, freeze, or not load properly anymore? Replacing the system software / firmware of your Motorola Motonav TN30 GPS will fix these and other symptoms of corrupted firmware. Satellite reception is also improved with newer firmware.

Follow these steps to download the firmware / system software of your Motorola Motonav TN30:

1. Head to Motorolas webpage to download the system software.

2. You will presented with this screen:

4352116.jpg

3. Find and enter your Motonav's serial number. Review the picture below to find the correct number on the label.

a57aa7a.jpg

4. Pause for moment and consider the Purchase Date. If you enter a date here beyond the covered warranty period of your Motonav TN30, you will see this screen:

6154b3f.jpg

Since the default year of this screen is 2007, I recommend choosing a more recent year. Many people complain that they didn't notice this and get themselves locked out of what they should be entitled to.

5. Enter the Purchase Date, click Submit, and save the file somewhere on your computer.

The software download procedure is now complete. Follow these steps to install the new system software for your Motorola Motonav TN30.

I hope that helps.
_______________________________________________
Motorola Motonav TN30 Manual Download
Motonav TN30 Firmware Fix
Motonav TN30 Upgrade Manual

on May 06, 2010 | GPS

Tip

Motonav TN30 Firmware Download


Motorola Motonav TN30 Firmware Download

a0d0990.jpg

Does you Motorola Motonav TN30 GPS lock up, freeze, or not load properly anymore? Replacing the system software / firmware of your Motorola Motonav TN30 GPS will fix these and other symptoms of corrupted firmware. Satellite reception is also improved with newer firmware.

Follow these steps to download the firmware / system software of your Motorola Motonav TN30:

1. Head to Motorolas webpage to download the system software.

2. You will presented with this screen:

4352116.jpg

3. Find and enter your Motonav's serial number. Review the picture below to find the correct number on the label.

a57aa7a.jpg

4. Pause for moment and consider the Purchase Date. If you enter a date here beyond the covered warranty period of your Motonav TN30, you will see this screen:

6154b3f.jpg

Since the default year of this screen is 2007, I recommend choosing a more recent year. Many people complain that they didn't notice this and get themselves locked out of what they should be entitled to.

5. Enter the Purchase Date, click Submit, and save the file somewhere on your computer.

The software download procedure is now complete. Follow these steps to install the new system software for your Motorola Motonav TN30.

I hope that helps.
_______________________________________________
Motorola Motonav TN30 Manual Download
Motonav TN30 Firmware Fix
Motonav TN30 Upgrade Manual

on May 06, 2010 | Motorola Mobility Motonav TN30 Car GPS...

1 Answer

I want to update my Garmin gps


Follow the below mentioned steps:
1
Download the Garmin WebUpdater software which is available via the link in the References section. Installing the WebUpdater software is only required once. Follow the instructions in the software installation screens to install the product.
2
Insert the USB cord into the Garmin device. Insert the USB end of the cord into a USB port on your computer.
3
Move the cursor to the Start menu of the computer and select Programs / Garmin / WebUpdater.
4
Follow the onscreen instructions for the Garmin WebUpdater and then wait until the program has installed the upgrades to your GPS device.
5
Close out the WebUpdater program and disconnect the USB cord from the computer and from the GPS.

Apr 17, 2011 | Garmin GPS

1 Answer

I will like how to update my 545


Follow these instructions to upgrade the system software of your Garmin GPSMAP 545.

  1. Click on "Download" and choose to save the file to your computer.
  2. Choose a location where you can easily find the file, such as the 'My Documents' folder or 'C:\'.
  3. Once the download is complete, go to the location where you saved the file.
  4. Double-click on the downloaded file. This will automatically extract the files to C:\Garmin and run a program to transfer the software update to an SD card.
  5. Load the SD card into your GPSMAP 545s and turn it on to replace the system software of your unit.
I hope that helps.

Aug 06, 2009 | Garmin GPSMAP 545s GPS Receiver

2 Answers

Enzer jor-001 gps


1. Go to http://www.enzersa.co.za/GPSDownload.html
2. Download the SA Maps Version 6 upgrade.
3. Follow the instructions:
How to use
1: Download South African Maps.zip to your computer
2: Open the zip folder and copy the content by right clicking and copy
3: Insert the SD Card from the GPS unit into the computer.
4: Now open the card through my computer
5: Replace the DestinatorApps folder with the new one

4. Replace the SD card in the Enzer and there you have it!

Best of luck!

Jul 21, 2008 | GPS

Not finding what you are looking for?
Magellan RoadMate 700 GPS Receiver Logo

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magellan GPS Experts

Jungle Ghost
Jungle Ghost

Level 2 Expert

154 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

yadayada
yadayada

Level 3 Expert

64034 Answers

Are you a Magellan GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...