Question about Sanyo CLT2054 20 in. EDTV-Ready LCD Television

1 Answer

SANYO Model CLT2054 Television

My television was on and playing fine, I turned away to do something and when I looked back the screen was blank, but there was still sound. My daughter and I could find no reason for the change, the cords were all still properly plugged in, the cable attached, the outlet for the television apparently working. We turned off the television for several hours, then tried it again. There was a very dark picture, and sound. I turned the television off for the night. Today it will not turn on. I disconnected the Playstation that was attached, no change. I disconnected the power cord and reattached it. No change. I plugged it into another outlet that I know to be working, but still no power. I do not know what else to try. no picture sound ok. pluged another tv in the same coax conection second tv works fine. pluged in dvd to clt2054 no picture but sound ok serial number b624101059831

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Sounds a lot like you lost the video driver or control board functionality. From the 'decay' of your image, with sound still working, and all else being good, you're primed for a new video controller. Are you inclined to do the repair yourself? The service manuals are hard to get online, but the local service center MIGHT sell you one.

Posted on Feb 16, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

VIZIO M3D470KD TV TURNS ON, HAVE BACK LIGHT, V LOGO APPEARS ON SCREEN THE FADES AWAY.


Corrupted firmware. An update is necessary. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ Firmware (Software) update procedure of many popular brand TVs and other devices are given in detail.

Sep 30, 2016 | Vizio M3D470KD 47 inch Class Theater 3D...

1 Answer

Vizio picture blank but lights up


you need to call a repair tech and have them check for blown capacitors in the power supply and the x & y sus (the circuits that light up your screen) for defective capacitors. they are very obvious to see-normally the top a a capacitor is flat, but in this case if bad they will be bowed out -rounded on the top.

Apr 21, 2010 | Vizio VW42LF 42 in. LCD HDTV

1 Answer

Turns on then goes blank with sound only. After a


When the tv goes off and you still have sound take a bright flashlight and shine it at the screen from a couple of iches away and see if you can see any video.If you do the problem is the backlight.If you don't see any video you would have a power supply problem.

Aug 22, 2009 | Televison & Video

2 Answers

Polaroid FLM-1911 LCD TV - I got blank screen when I turn on it.


I had the same problem and got a TV repair man to fix it for real cheap. The whole fixing took less then 30 min and he goes to your house to fix the TV. He fixed it for an excellent price that left us astonished. He lives in NY. Email me if anyone needs his contact information. You wont be disappointed.

Apr 11, 2009 | Polaroid FLM-1911 19 in. LCD Television

1 Answer

TV screen goes blank but power stays on


Sounds like the CRTs are going into protective blanking due to the vertical output ic needing to be resolderd. Try resoldering the vertical IC that may possibly fix the issue.

Jun 15, 2008 | Mitsubishi WS-73713 73" Rear Projection...

1 Answer

Black square on one channel


that's a picture inside a picture option, and it sounds like the inside picture is set for a blank channel...just go to the menu, and shut off the picture in a picture option..should do the trick..

and keep the kids away from the machine

May 24, 2008 | Insignia IS-LCDTV32 32 in. Television

1 Answer

When tv turned screen is blank and chirping sound comes from back


A chirping sound usually means that one of the secondary supplies has shorted, most likely the horizontal output transistor. The power supply "chirps", which is the sound it makes when it protects itself from drawing too much current. The set should be serviced by someone with experience in Philips projection TV'.

Jun 21, 2007 | Philips 43PP9202 43" Rear Projection...

Not finding what you are looking for?
Sanyo CLT2054 20 in. EDTV-Ready LCD Television Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...