Question about OKI C5150n Led Printer

1 Answer

Oki C5150 printer menu is part english part spanish. It comes up in english when you click print but all the other pages are in spanish(?)

Posted by on

  • Anonymous Apr 17, 2008

    Have the same problem with the OKI C5150. Page lengths do not correspond to normal letter and legal size paper. Those portions of the OKI's printer interface are in spanish and measured in centimeters instead of inches. PDF files that should print in letter size are printing on four sheets as if it is a sheet 11" by 17" in size. Have tried to delete the printer driver and install drivers again, both from the CD provided with the printer and also by downloading from the OKI site. Neither fixed the problem. Attempted to call OKI but could not find a phone number for support. The OKI support pages on the web don't address the problem either.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 97 Answers


How To:
Uninstall a Spanish or Portuguese driver and install the English version when Windows XP installs the incorrect language, where either a couple of the tabs are in the wrong language, or everything is incorrect.


Action:

IMPORTANT NOTE: THE PRINTER MUST BE TURNED OFF DURING THIS PROCEDURE OTHERWISE WINDOWS WILL AUTOMATICALLY INSTALL THE SPANISH OR PORTUGUESE DRIVER AGAIN. DO NOT USE PLUG 'N PLAY FOR DRIVER INSTALLATION.

1. Delete the Driver Icon from the Printers and Faxes Window.

IMPORTANT STEP:
2. Reboot the PC

3. Click on File --> Print Server Properties
Oki C5150 printer menu is part english part spanis - 0.2c6?openelement&fieldelemformat=gif

5. Click on the Drivers Tab.

6. Highlight the driver being deleted (C5200n shown as a reference below), and click on Remove.
0.347e?openelement&fieldelemformat=gif

IMPORTANT STEP:
7. Reboot the PC

8. Go back into the Server Properties Drivers Tab (as shown above), and click on the Add... button.

9. On the first screen click on Next.

10. On the Printer Driver Selection Screen, click on Have Oki C5150 printer menu is part english part spanis - 4.7ce?openelement&fieldelemformat=gift/uploads/images/4.7ce?openelement&fieldelemformat=gif" alt="4.7ce?openelement&fieldelemformat=gif" class="h_mi" />


11. Browse to the location of the English driver that is to be installed and click on OK (Note, the C5200n printer is being used as a Oki C5150 printer menu is part english part spanis - 7.3852?openelement&fieldelemformat=gifs from the CD).
7.3852?openelement&fieldelemformat=gif
9.628?openelement&fieldelemformat=gif 12.6e6?openelement&fieldelemformat=gif


14. Click Finish on the last window.

15. Finally, turn on the printer. Windows XP will automatically find the printer and install the English version of the driver.

Posted on Dec 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change language from Spanish to English on printer


I hate to say it, but I don't think you can, as it states in the owner's manual of the c5500, "the menu indicators are given in english only" and "since the menu is likely to change based on destination or for other reason, it is not disclosed to the end user".

I'm thinking you may have a machine that was destined for a spanish speaking person or area.

The manual is available here:
http://printelogy.net/Oki%20Manuals/C5500-C5800-C6100_Service%20Manual.pdf

May 07, 2010 | OKI C5500n Printer

1 Answer

C5150: All color prints are extremely streaky and


This happened to me. It was caused by a bad "oki compatable" color cartridge. One time it ruined my drum. It was always the yellow color. Decide which cartridge is printing streaky. Remove it, bang it on the inside of a large plastic garbage can. Clean it. Reinstall it . If it still prints streaky throw it befor you ruin the drum. Replace it.

Nov 07, 2009 | OKI C5150n Led Printer

1 Answer

The colors of my oki c5150 do not line up, they all print but the blue will start higher then the others making it look like a 3d picture without the glasses. It is not a set amount higher, even on the...


Sir,
This is the problem with toner cartridge. This may be clogged. Remove the toner cartridge, through cleaning and insert it. It may be solved.
Thanks Good Luck

Aug 24, 2009 | OKI C3200n Led Printer

3 Answers

Instruction manual for OKI TV V19A-PH in English wanted


I was searching for a manual for an OKITVV26D as the original is all in Spanish. The website, www.okiprintingsolutions.com , listed in the manual did not appear to list any TVs. However I found the Spanish OKI website and after several attempts came across this page that lists one manual in English:-
http://www.okiservice.es/okiweb/services.nsf/Webmanuales?OpenForm&Seq=1#_RefreshKW_Familia
Select Familia = TELEVISORES and
Modelo = MANUAL USUARIO TV OKI 32" CON TDT (Inglés)
then click the Visualizer button [Download].

If certain functions on your TV are not listed in the above manual then try this site
http://uk.babelfish.yahoo.com/ as it will allow you to translate a number of languages to (roughly) English.

Feb 09, 2009 | Televison & Video

1 Answer

Language


Enter the menu,
Change Language set to American. It is under symbol sets. Also change code page to usa.

Menu Mode

1. Verify that paper and the ribbon are installed.

2. Power ON the printer.

3. Press SELECT and place the printer OFF-LINE (SELECT will not be lit).

4. Press QUIET to enter Menu Mode.

5. The line shown below will print.

Printer Control Emulation Mode Epson LQ 6. Go to Step A to print the current menu.

Go to Step B to change the menu.

Step A

Press PRINT to print the current Menu.

Press EXIT to exit Menu Mode.

The printer will go ON-LINE. (SELECT will light.)

Step B

Press GROUP to move through the groups of the Menu.

A line prints, showing the Group.

Press ITEM to move through the items in a group.

A line prints, showing the Item.

Press SET to change the setting for an item.

A line prints, showing the Setting.

Press EXIT to exit Menu Mode.

The printer will go ON-LINE. (SELECT will light.)

Feb 15, 2008 | OKI MICROLINE ML-395 Matrix Printer

1 Answer

Problem with oki microline 395


Enter the menu,
Change Language set to American. It is under symbol sets. Also change code page to usa.

Menu Mode

1. Verify that paper and the ribbon are installed.

2. Power ON the printer4.gif.

3. Press SELECT and place the printer OFF-LINE (SELECT will not be lit).

4. Press QUIET to enter Menu Mode.

5. The line shown below will print4.gif.

Printer Control Emulation Mode Epson LQ 6. Go to Step A to print the current menu.

Go to Step B to change the menu.

Step A

Press PRINT to print the current Menu.

Press EXIT to exit Menu Mode.

The printer will go ON-LINE. (SELECT will light.)

Step B

Press GROUP to move through the groups of the Menu.

A line prints4.gif, showing the Group.

Press ITEM to move through the items in a group.

A line prints, showing the Item.

Press SET to change the setting for an item.

A line prints, showing the Setting.

Press EXIT to exit Menu Mode.

The printer will go ON-LINE. (SELECT will light.)

Feb 15, 2008 | OKI MICROLINE ML-395 Matrix Printer

1 Answer

OKI MICROLINE 591


You need to set and store paper size, width etc in printers internal menu and on print driver on pc.
See Oki manual for printer settings its written on the front of the machine i think menu and set power on, then print to see settings then read manual...

Jan 04, 2008 | OKI MICROLINE 591 Matrix Printer

2 Answers

Oki c5150 wont print black


First, clean the LED heads with a lint free cloth and isopropyl alcohol (the LED heads are the attachments on the underside of the lid when you open your printer; four of them for each color). Try printing something after doing that. If it's still an issue just with black, try switching the black and magenta drums/toner (keeping them locked together). The drum w/ toner cartridge simply pulls straight up and out, no switches or locks to flip. Then print a page of text; which will output from the printer in magenta. If that looks okay, then it may be an issue with your black drum and needs to be replaced.

Oct 05, 2007 | OKI C5150n Led Printer

1 Answer

Printing darker


charging connections are not properly connected

Sep 06, 2007 | OKI C5150n Led Printer

Not finding what you are looking for?
OKI C5150n Led Printer Logo

924 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

386 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...