Question about Philips 55PP9363 55" Rear Projection HDTV-Ready Television

3 Answers

Clicking sound! My tv turns on with the power button light is red and a clicking sound coming from the back of the tv, no picture no light on screen. Please help,

Posted by on

3 Answers

Funny but I have a PHILIPS HDTV 42" Plasma and I still hear a clicking sound when I turn it on and/or off. As for the green flash screen I get that when I change channels but it is only for a milisecond because the TV is trying to adjust the screen according to its format on the channel. (ie. 1080i, 720, etc)
I did have it repaired because the screen cracked on its own one day as I was watching TV.(and I never dropped it or had anything hit it anywhere at all)
My warranty covered me for some independent repair company to replace my screen. After a year your basically on your own so buy insurance. I'm scared that the clicking has something to do with it tho... :-\

Posted on Jul 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It depends, if it is clicking at first: that is good. It means that power just went through everything and the TV is ready to start itself up. I'm having a problem where: it will click once, everything starts to turn on, then there is a clicking noise from a completely diffrent part of the TV. This second click just so happens to turn the TV off for me(How convenient, i dont even have to push a button....it does it by itself). It doesnt give me more than 1.5 seconds before it turns itself off(Not enough time to get the bump code to know what is imediately wrong with it)....I also need help
(If this is a problem that is common, or at least known

Posted on Jun 25, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 50 Answers

Is this a dlp?

Posted on Feb 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Panasonic PT-52LCX66 television that I bought just over 4 years ago. I have replaced the bulb for the second time just 3 months ago and now the set will just shut off after about 3 minutes of...


Tv making and have clicking sounds as tv shutdown as lights flashes?Yes.The board that call the Ballast board might be dying and dead soon.This Ballast board job responsible only are to ingnite the tv projection lamp only.

Jun 30, 2011 | Panasonic PT-52LCX66 Projection Television

1 Answer

No sound/picture and red power light always on (Hitachi 43FDX15B)


When u turn the tv on,u hear alot of clicking?That mean the Ballast that help the projection bulb to work is dead.Change the Ballast,might as well change the bulb too.U don't know what is the condition of the projection bulb in.

May 29, 2010 | Hitachi 43FDX15B 43" Rear Projection...

1 Answer

My TV does not power up when the power button is pressed.


It's sounds like your lamp or backlight has went out, I suggest reading your manual for service info and look online for a local repair shop.

May 16, 2009 | Projection Televisions

2 Answers

Power light flashing three times. when came on screen was distort


very common problem you need to replace the flyback number 259296 and the CP150 you can get replacemnent flyback and cp150 at the following link with free step by step instructions on how to do the repair.
http://servicemanuals.vstore.ca/

Mar 06, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Standby/timer light stays on red. no picture or sound on tv.


my sony red light flash.but it will not turn on just clicks

Nov 26, 2008 | Sony KP-48S75 48" Rear Projection...

2 Answers

No Picture


Did you have color problems in past? Most of these sets have convergence problems. Amps goes out. But you should have seen some type of distortion from color, red,blue, green. If no color problems then maybe vertical ouput out or horizontal output bad.

Sep 09, 2007 | Hitachi Director's Series 65XWX20B 65"...

1 Answer

PT-45LC12 wont power up


You have a bad lamp. The "clicking" sound you hear is the ballast (lamp power supply) attempting to start the lamp. The warning on Panasonics that comes up on screen does so when the life expectancy of the lamp is approaching. Otherwise your "clicking" sound and the red light on front are saying bad lamp. When you replace the lamp remeber to follow the instruction that Panasinc provides with the new lamp on restetting the lamp timer. This is usually done with the volume down on the TV and the PIP button on the remote.

Feb 26, 2007 | Panasonic PT-45LC12 45" Rear Projection...

1 Answer

No sound or picture


Your tv is going into protection mode, it has detected a short in one of tv's circuits. thus, not allowing your tv come on. Can give you more detail if you want to repair it yourself, or call a factory authorized repair shop to assist you.

Sep 04, 2006 | Toshiba 43A10 43" Rear Projection...

Not finding what you are looking for?
Philips 55PP9363 55" Rear Projection HDTV-Ready Television Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...