Question about Trendware TEW-452BRP Wireless Router (TEW452BRP)

3 Answers

Firmware upgrade I downloaded the firmware upgrade to my computer and now I need to open the router config to download it to the router. I can't open the ie after entering the ip address. I'm stuck and frustrated...need help. The installation CD will not go any to any other steps till the firmware is installed but the router config page will not open to download the firmware.

Posted by on

  • Anonymous Oct 22, 2008

    how can i play full version game in psp


×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Firmware Upgrade Instructions:
Please download and unzip the firmware file to computer's local hard drive and then follow the instructions in the "readme.txt" file to upgrade the firmware.

Warning : -
Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Note" do not address the problem you are experiencing, please do not upgrade the firmware. Never upgrade the firmware using a wireless connection. Firmware upgrade will reset the Router to factory default state (all current settings will be replaced by default settings). When necessary, please write down the Router's current settings before performing the firmware upgrade. Please do not load the previously saved Router "configuration file" to the new firmware.

If you need assistance performing the firmware upgrade or if you have any questions, please contact our Techsupport Team http://www.trendnet.com/support.

Posted on Feb 17, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Ok well i keep getting disconnected from xbox live. someone told me to upgrade or downgrade my firmware. would this be an exmaple were i can upgrade my firmware?

Posted on Jun 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do i download firmware to my mp3 player

Posted on Oct 31, 2008

2 Suggested Answers

Astrobyte
  • 110 Answers

SOURCE: opening routers config page.

Most router config pages can be opened at http://192.168.0.1 or http://192.168.1.1 . Better confirmation can be made if you provide the router model. You can also double check the address by going to start > run, typing cmd then hitting enter. In the command window that pops up, type ipconfig /all and press enter again. In the information it returns, you will see a Default Gateway address. That address should lead to your router if you put it in your browser.

Posted on Feb 17, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my linksys router keeps on droping the connection and i have to re start the router every tem minutes can you help


Try to upgrade the firmware of the router.
Is there any computer connected to the router with the cable.
If not then you will need to connect the computer to the router.
Download the firmware of the router from the manufacturer's website.
enter the model number. select proper version number and download the firmware of the router.
Once you download the firmware, you will need to open the router set up and upgrade the firmware of the router.
After upgrading the firmware, it is recommended that you reset and reconfigure the router.
Click Here for more information about router and networking

Nov 13, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

After over a year of good use, the past 2 weeks have seen the router repeatedly lose the internet connection after a minute or so of use. It reboots ok initially but then loses the connection again.


Try to upgrade the firmware of the router.
Is there any computer connected to the router with the cable.
If not then you will need to connect the computer to the router.
Download the firmware of the router from the manufacturer's website.
enter the model number. select proper version number and download the firmware of the router.
Once you download the firmware, you will need to open the router set up and upgrade the firmware of the router.
After upgrading the firmware, it is recommended that you reset and reconfigure the router.
Click Here for more information about router and networking

Oct 11, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Cuts in and out looses internet connection


Try to upgrade the firmware of the router.
Is there any computer connected to the router with the cable.
If not then you will need to connect the computer to the router.
Download the firmware of the router from the manufacturer's website.
enter the model number. select proper version number and download the firmware of the router.
Once you download the firmware, you will need to open the router set up and upgrade the firmware of the router.
After upgrading the firmware, it is recommended that you reset and reconfigure the router.
Click Here for more information about router and networking

Oct 05, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Wireless-G WRT54G Router: how do i upgrade the firmware...


Is there any computer connected to the router with the cable.
If not then you will need to connect the computer to the router.
Download the firmware of the router from the manufacturer's website.
enter the model number. select proper version number and download the firmware of the router.
Once you download the firmware, you will need to open the router set up and upgrade the firmware of the router.
After upgrading the firmware, it is recommended that you reset and reconfigure the router.
Click Here for more information about router and networking

May 06, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

I have to reset my linkys router almost everytime i log on help kindercat46@msn.com


Try to upgrade the firmware of the router.
Is there any computer connected to the router with the cable.
If not then you will need to connect the computer to the router.
Download the firmware of the router from the manufacturer's website.
enter the model number. select proper version number and download the firmware of the router.
Once you download the firmware, you will need to open the router set up and upgrade the firmware of the router.
After upgrading the firmware, it is recommended that you reset and reconfigure the router.
Click Here for more information about router and networking

Feb 21, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

How do I upgrade firmware?


go to linksys download upgrade and follow instructions

Feb 19, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

I have to unplug and replug the router to get online


If you connect the computer directly to the modem
does it work properly.
If that works properly then your modem is working
properly.
Try to upgrade the firmware of the router.
Is there any computer connected to the router with
the cable.
If not then you will need to connect the computer
to the router.
Download the firmware of the router from the
manufacturer's website.
enter the model number. select proper version
number and download the firmware of the router.
Once you download the firmware, you will need to
open the router set up and upgrade the firmware of
the router.
After upgrading the firmware, it is recommended
that you reset and reconfigure the router.
Click Here for more information about router and
networking

Feb 12, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

How do I update my linksys firmware


Is there any computer connected to the router with
the cable.
If not then you will need to connect the computer
to the router.
Download the firmware of the router from the
manufacturer's website.
enter the model number. elect proper version
number and download the firmware of the router.
Once you download the firmware, you will need to
open the router set up and upgrade the firmware of
the router.
After upgrading the firmware, it is recommended
that you reset and reconfigure the router.
Click Here for more information about router and
networking

Feb 11, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

I get disconnects every now and then. It happens on wired and wireless, only fix is restarting the router. Any ideas on how to fix this?


Try to upgrade the firmware of the router.
Is there any computer connected to the router with
the cable.
If not then you will need to connect the computer
to the router.
Download the firmware of the router from the
manufacturer's website.
enter the model number. elect proper version
number and download the firmware of the router.
Once you download the firmware, you will need to
open the router set up and upgrade the firmware of
the router.
After upgrading the firmware, it is recommended
that you reset and reconfigure the router.
Click Here for more information about router and
networking

Feb 04, 2010 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Opening routers config page.


Most router config pages can be opened at http://192.168.0.1 or http://192.168.1.1 . Better confirmation can be made if you provide the router model. You can also double check the address by going to start > run, typing cmd then hitting enter. In the command window that pops up, type ipconfig /all and press enter again. In the information it returns, you will see a Default Gateway address. That address should lead to your router if you put it in your browser.

Feb 16, 2008 | Trendware TEW-452BRP Wireless Router...

Not finding what you are looking for?
Trendware TEW-452BRP Wireless Router (TEW452BRP) Logo

11,280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Trendware Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Dan Castro

Level 2 Expert

329 Answers

Are you a Trendware Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...