Question about Washing Machines

3 Answers

GLW10US won't do anything but beep

The 2nd, 3rd and 5th light are on and the machine beeps every second. When the pause is pushed the spin light goes on and the beeping stops - however the lights remain on. When the power is pushed again the spin light goes off and the beeping starts again. There is also a slight noise that is coming from inside near the connection where the drain hose is connected.

Only 2 to 3 year old Fisher & Paykel Top load w/m GW709AU will fill then just beep 1/ sec with l.e.d.s on as per you had programed start. Only way to stop the beeping is to turn off the power. However if you inturupt the fill cycle by lifting the lid, the machine will then overfill with water regardless of what water lever has been selected. It pumps out water & spins ok.

Posted by on

  • 3 more comments 
  • Anonymous Apr 25, 2008

    bosch washing machine front loader wont stop bleeping when finished driving us mad

  • Anonymous Apr 25, 2008

    bosch washing machine front loader, wont stop bleeping when it is finished driving us mad

  • mywasher123 Oct 18, 2008

    same problem

  • bertsmyth Feb 23, 2009

    10 year old washing started beeping every 40 seconds

  • trav_audi May 24, 2009

    I know, we had the technician out one day and asked him--he fixed it, but we got a cat, and she pressed the right combination and it beeps again!!

×

3 Answers

We love our new Bosch but... THE BEEPING IS TERRIBLE!!! I put a load in to wash when we go to bed. The beeping wakes us up. It is BAD!!

Posted on Jun 17, 2008

I agree, the incessant beeping at the end of a cycle is maddening. it literally goes on for like 5 minutes + until you turn the **** knob off. and its a loud BEEP BEEP BEEP BEEP , BEEP BEEP BEEP BEEP.

Posted on May 18, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

Well i don't have any experience with this brand but i would say you need to change the fill switch it senses how much water is in the tub shuts the water off then starts the washer its also called the pressure switch

Posted on Feb 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My f&p gw611 Fills up but then wont wash.the 2nd


Most possibly be Error code 56,
Is common in 11 series machines & early series 12.
Is your machine beeping & showing a weird pattern of lights on the wash cycle, It is displaying an error code,
To read this error code you start at the red spin light & work to the left only add up the lights that are on. Red spin light = 1 2nd rinse light =2 1st rinse light =4 last wash light=8 4th wash light=16 3rd wash light=32 2nd wash light=64 1st wash light=128
j8paojvh5jrgaaaaabjru5erkjggg==


2_26_2013_3_17_31_am.jpg
Let me know your error code tour getting

Oct 20, 2013 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fishwe&Paykel GWL10 won


It could be the out of balance switch faulty & need replacing.

Nov 17, 2012 | Fisher Paykel EcoSmart GWL15

1 Answer

I have an 11 year old 5.5 excellence top loader by F&P. it won;t continue on with any cycle or programme. it wants to start, but after couple seconds it stops, then it tries again, and then stops,...


Hi just read your posting.When the machine stops and beeps a series of lights will light up on the wash progress line of lights.Starting from left to right which lights are lit when the machine is beeping,is it the 2nd and 6th or the 3rd and 7th etc?Please reply with additional information and I am sure I can help you.Looking forward to your reply.

Jun 19, 2011 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Machine will fill with water,will not spin to wash just beeps


Hi just read your posting.Now when the machine beeps an error code will appear.This will be in your LCD display or in a series of lights being lit.Now the lights that are lit when the machine is beeping will be in a row of 8 lights.Starting from the left to right which lights are lit when the machine stops and beeps,Is it the 2nd and 5th or the 3rd and 7th ---etc---? Please reply reply with additional information and I am sure I can help you rectify this fault.Looking forward to your reply.

Oct 14, 2010 | Fisher and Paykel IWL12 Top Load Washer

1 Answer

The machine stops at rinse cycle and beeps when i open there is lots of suds of soap and it wont go further is there anything i can do or do i need a repairman


Hi just read your posting.Now when the machine beeps it will show an error code.It will appear in your LCD screen if you have that model or a series of lights will light up.These lights will be in a row of 8 lights.Starting from the left to right which ones are lit,Is it the 2nd and 5th or the 3rd and 7th ---etc---?Also could you confirm the model number of your machine for me.Looking forward to your reply.

Sep 20, 2010 | Fisher Paykel EcoSmart GWL15

1 Answer

Fisher/Paykel WA37TG1 washer. goes through the wash cycle and the rinse cycle. stops at spin cycle and beeps. lots of suds left on clothes. have unplugged and let sit and start again. this got me through a...


Hi just read your posting.Now when the cycle beeps a series of lights will light up indicating an error code.The lights will be in a row of 8 lights.Starting from the left to the right which lights are lit?Is it the 2nd and 5th or the 3rd and 7th ---etc----?Or do you have the display model and an error code is on the screen?Please reply with the additional information on the questions and I can help you further.

Jul 20, 2010 | Fisher and Paykel WA37TG1 Top Load Stacked...

1 Answer

F&P GW512 compact wont spin


Hi just read your posting.Does your machine drain the water out?Starting from left to right what lights were lit on the progress bar when it started to beep?Was it the 2nd and 5th or 3rd and 7th---etc---?Please reply with additional information on the questions and I am sure I can help you rectify this fault.

Jul 09, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Have kelvinator smart drive 503, water won't run


Hi,

I have exactly the same issue, which first appeared yesterday. Following your advice, the lights that are lit are 3rd, 5th, 7th and 8th. The SLOW & HOLD spin speed lights are lit, along with constant beeping :)

Jun 16, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher & Paykel GW612 beeps before spin.


You have fault code 66 (01000010) Phase 6- Pressure Transducer (Ptx) Error - Frequency >90kHZ. In simple terms you need to replace the main "Motor Control Module" Cheers

Mar 09, 2009 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

GLW10US won't do anything but beep


the error you are describing is a communication problem between the display module and the motor control module. unfortunately there is no test to determine which it is. most common is the motor control or RPS (rotor position sensor)
part# 425221P

Jan 07, 2008 | Fisher and Paykel GWL11 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,583 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...