Question about Columbia All Sport watch

1 Answer

SET THE TIME


I HAVE LOST THE INSTRUCTIONS ON HOW TO SET THE TIME AND DATE.

Posted by on

  • raycbarton May 09, 2009

    need help setting tim on watch

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 77 Answers

: 1. With the time and date showing, press the top left button. 2.Press the right top button (this sets seconds) 3.Press the bottom left button. This flashes the hour; press the top right button until you have the correct hour (there is no symbol for am, pm will show if pm). 4.Press the bottom left button, minutes flash. Press the top right button until correct minutes. 5.Press the bottom left button, month flashes. Press the top right button til correct. 6. Press bottom left button, date flashes. Press the top right button til correct. 7. Press bottom left button, day flashes. Press right top button til correct. 8. Press bottom left button, time format flashes (can be set to 24 hour clock). If correct, you're done. Press top left button if you're done (can be pressed at any step if you're finished). To turn off the chime and alarm, press the top right button repeatedly until the CHIME or CH symbol is gone, then press the left top button. Repeat for alarm but watch for the bell icon or ALARM or ALM to disappear, then press the top left button.

Posted on Feb 16, 2008

4 Suggested Answers

  • 1 Answer

SOURCE: I Lost My Small Book

Just go to this link, and put in model # http://world.casio.com/wat/download/en/manual/

Posted on Mar 08, 2009

smartr10U
  • 1305 Answers

SOURCE: Zeon calculator watch, just replaced battery

You can find all the bulova manuals on the website HERE>.
It's a free download for any of their manuals.... look for your model number.
print a copy for your future reference too..
K

Posted on Jun 25, 2009

  • 2501 Answers

SOURCE: I need to know how

You can get instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

Posted on Feb 27, 2011

  • 6 Answers

SOURCE: how do i set time , day and date , lost

The problem, as I have just discovered, is that when you go to the Citizen watch website listed above, you will get no help at all for the caliber 3100, "No document found..."
Try this link instead:
http://www.citizenwatch.jp/support/pdf/e310/e.pdf

Yes, this is the actual link to the full manual for the Caliber 3100 watch

Posted on Mar 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instructions for Armitron All Sport 40/6623 time setting needed.


Here's how you set the 40/6623 M175 for anything. I figured it all out with help from here :). Okay so want to set the alarm? Press MODE once. Then hold it. And use the DATE and ALARM buttons to set the alarm. Press MODE twice and you're done. To set time do the step before this and press MODE once. Use the DATE and ALARM button to set the time. As for the 24 hr deal what you do is hold ALARM and press MODE or hold MODE and press DATE. To turn alarm on/off hold ALARM button and then press the DATE button. To set the date go to time set mode and keep cycling between the hours and mins until you get to the date :). That's all you gotta do :D. I know many of you need the instructions so here it is!!

Apr 02, 2011 | Armitron Digital Sport 406623BLK Watch

1 Answer

How do i set the time on a armitron 45/6975 watch i lost instructions


Hi an_stocker0,
There is two pulls to set the time and date .First pull is for the day / date wind it in order to choose the right date number and second pull is for the time wind it until the desired time comes out. For better understanding follow this link for more information and instructions below. Feel free to ask whatever the results.
http://www.armitron.com/docs/Automatic%20Manual.pdf
Hope its may helps;
Regards, VOTIT

Dec 10, 2010 | Armitron Two Tone Sports Watch

1 Answer

A friend has a talking watch & has lost


Unfortunately there are no available instruction downloads for Marcel Drucker talking watches. Use this link to get in touch with them and request instruction manual: http://www.marcelwatch.com/category_s/23.htm Rate me, plz.

Feb 26, 2010 | Watches

1 Answer

I lost my instructions on how to set my Timex Ladies 1440 Sport Watch. Where can I find the instructions? I need to reset the date, put it in military time, and set the time.


Go to the Timex web site (timex.com) and at the bottom of the page is a menu, Click on the "manuals/downloads" and the on "product manuals downloads" and enter you model number in the box.

You will then be shown a list of varieties of the model. Choose the one that is for your watch and download.

Feb 03, 2010 | Watches

2 Answers

Need instructions for Timex 1440 Sport watch


TIME AND DATE
1. Press and hold MODE until HOURS digits flash (you'll be in Alarm Mode) Press MODE again to enter TIME mode, SECONDS digits will flash.
2. Press ADJUST to set SECONDS to zero.
3. Press START/STOP to select MINUTES.
4. Press ADJUST to change.
5. Repeat to set HOURS, MONTH, DAYS, and DAY of WEEK. Go through 12 hours to set AM or PM.
6. Press MODE when done.
7. To display DATE from Time display , press START/STOP.
8. With DATE displayed press and hold START/STOP, then press ADJUST to change display between DATE-MONTH and MONTH-DATE.
9. With TIME displayed, press and hold ADJUST, then press MODE to switch between 12-and 24-hour format.

ALARM AND HOURLY CHIME
1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash.
2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM.
3. Press START/STOP to select MINUTES.
4. Press ADJUST to change.. Press MODE when done.
5. Press and hold ADJUST, then press START/STOP to turn chime on/off. Press START/STOP again to turn alarm on /off. Release START/STOP when done.

CHRONOGRAPH
1. Chronograph will count up to 24 hours. Lap times are not stored. After 40 minutes chrono display changes from seconds to minutes.
2. With time displayed, press MODE to select Chrono Mode.
3. Press START/STOP to start.
4. Press ADJUST to view lap time. Press again to sesume lap timing.
5. Press START/STOP to stop timing . Press ADJUST to reset chrono to zero.
6. Repeat for successive laps.

Nov 22, 2008 | Timex 1440 Nylon watch

3 Answers

Setting the time on a bench watch


hi i had the same problem but i have just found the answer. hold the light button until it flash's 12 or 24, then press mode which will change you on to the time, date, ect then fiddle around with the start and reset button to toggle with the time and date. when your done with the time press light again.

Oct 16, 2008 | Watches

3 Answers

Lost manual to Coleman nightsight watch and need to set time and date


The manuals for Coleman watches are at this website. . .

http://www.gsi-usa.com/instructions/

You need to look at the back of your watch to get the model number.

Jul 30, 2008 | Casio G-Shock GW500A-1V Wrist Watch

3 Answers

Setting the month,day, and date.


Alot of times on watches you can click on the stem one time and you can change the hour. Click on the stem and you can change the minute, date, and month.

Jan 04, 2008 | Watches

Not finding what you are looking for?
Columbia All Sport watch Logo

719 people viewed this question

Ask a Question

Usually answered in minutes!

Top Columbia Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Nalin DSouza
Nalin DSouza

Level 2 Expert

224 Answers

Are you a Columbia Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...