Question about Panasonic PT-47WX42 47" Rear Projection Television

2 Answers

Panasonic HDTV Projection PT-47WX42F won't turn on

I turn it on, it stays on for 4 seconds, then it turns off, with the red light in the front blinking 3 times at a time.

Posted by on

  • Anonymous Mar 20, 2009

    will not turn on, red light blinks 3 times What is Aprox. cost to replace convergenc I C s-- ? resistors--? and or signal board ? I'm trying to figger , should I repair or replace ? Thanks Abe

  • mersatt May 11, 2010

    Thanks. I have a bad TNP2AH035 board. Where can I find it?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 8,617 Answers

Your Set is going into shutdown mode due to the convergence section of your television. Thats what 3 blinks mean. It could be just the Convergence ICs and resistors or you may need a new Signal board TNP2AH035 Let Me know if you need further assistance with this problem.

Posted on Feb 22, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes that is exactly what my tv is doing... How can i fix it..

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic T.V. model number PT-47WX42F no picture or sound


R800 open on power board next to the relay.the resistor value is1.5 ohms 10 watt resistor.

Jul 15, 2009 | Panasonic PT-47WX42 47" Rear Projection...

1 Answer

Panasonic PT-47WX42F outer most screen cracked


Look for a used Panasonic PT-47WX42F One in Local ads, Or place a wanted ad for your model. ~ Or if you want A new one, Get ahold of a TV Shop And OR Panasonic and be ready to spend lots of $$$$ ~ And yes there easy to replace!, Make sure you have a large clean area to work in, And a helper. Becarful and replace them back in as they came out! ( Top Bottom) they should be marked with a small tag or mark.... Geo*

Jul 06, 2009 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Panasonic PT-53TW53G 1 Blinking red light, will not stay on.


just got back today for same problem. convergence went out. took to repair shop. $200 part plus $60 labor. second time in a year convergence went out. was told it will happen again.

Mar 19, 2009 | Panasonic PT-53TW53 53" Rear Projection...

1 Answer

RED TINT


yOUR CRTS ARE SHOWING THE SIGHNS OF WEAR. ON THE FRONT OF THE SET BEHIND THE SPEAKER GRILL OR FRONT FACIAL. THERE ARE 6 CONTROLS 3 FOR SCREEN RED GREEN AND BLUE AND 3 FOR FOCUS RED GREEN AND BLUE. YOU CAN TRY TURNING THE RED SCREEN DRIVE CONTRIL COUNTER CLOCK WISE. JUST A VERY LITTLE BIT.

Jan 22, 2009 | Projection Televisions

1 Answer

PT-50LC14


Hey Beestergirl, I just had my tv fixed for 385.00

Apr 21, 2008 | Panasonic PT-50LC14 50" Rear Projection...

2 Answers

Panasonic 47wx42f projection


Joe,
It sounds like your may need to replaced your convergence ic's loc# ic7001 and ic7002 stk392-110. That should take care of your alignment problem.

Dec 03, 2007 | Panasonic PT-53WX42 53" Rear Projection...

Not finding what you are looking for?
Panasonic PT-47WX42 47" Rear Projection Television Logo

Related Topics:

564 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...