Question about Televison & Video

3 Answers

On timer light blinks on/off tv does not turn on jvc av-32d502

Posted by on

  • 3 more comments 
  • Tony Woosnam May 14, 2008

    i have exactly the same problem with the green timer light blinking on and off. i have tried switching off at the mains for 5 minutes but it is still the same. please help.

  • Craig Shoji Jan 16, 2009

    Same problem as above according to the manual it is the on timer and can't turn it on

  • Anonymous Jan 21, 2009

    same problem...on timer blinking..tv does not power on...

  • Anonymous Jan 21, 2009

    on timer blinks but the tv will not turn on

  • Anonymous Apr 02, 2009

    push power button to turn on it turns on and the timer light flashes for a few seconds then the tv shuts off

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On timer blinks tv not turn ON I did try to unplugh plug back but still not working please advise

Posted on Jul 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine has the same problem, but unpluging it did not help.
Any other solutions?

Posted on Mar 20, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Well, it sounds like the TV is in timer standby mode and thus preventing the TV to turn on or off.

  • Very simple thing you can try to reset the TV is to unplug it from the wall and leave it unplugged for about 5 minutes or so.
  • Next, replug in the power for the TV and see if the timer mode has been cancelled out.
Regards,

Posted on Feb 16, 2008

2 Suggested Answers

  • 142 Answers

SOURCE: jvc tv av-32d502 timer light is flashing will not turn on

Hello, I am a tv tech. I worked on a JVC AV-32D502 today. Problem: led flashes / no power or picture at all. Same as trobertson52's set. The microprocessor is bad in my machine. trobertson52, if your sets' relay does not click when the power button is depressed you most likely have the same problem or the standby power circuit is at fault. That circuit supplies +5 volts to the micro.

Edtal you have a different problem with your machine. Your machine is going into shutdown. A number of circuits could cause this and would need to be looked at by a technician to determine exactly which circuit is at fault. High voltage transformer (HOT) \ Vertical Circuit \ Power supply are the most likely causes.

barneyinNC

Posted on Sep 30, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need remote control code for Radio shack 2-in-one.


0053 is the only JVC code in the master manual

Please rate the help++++Thanks for using FIXYA

Sep 24, 2009 | JVC AV-32D502 32" TV

1 Answer

On- timer light flashing no picture no sound.


hit the timer or program button on remote. see if that helps. your trying to get the picture up so you can turn the timer switch off. make sure tv is on. reply if you need more help
have a great day bama46 please rate

Aug 22, 2009 | JVC AV-32D502 32" TV

1 Answer

RED BLINKING TIMER TV WONT TURN ON


Page 40 on the PDF link below may help - Ask me if you need further assistance.
Thanks
Len
http://resources.jvc.com/Resources/00/00/99/51798Cien.pdf

Feb 28, 2009 | JVC AV-32230 32" TV

1 Answer

Tv shutting off timer light blinking


The problem you describe is not really related to a timer function being set. The unit is in shutdown and the light is blinkng to let you know there is a problem.
There are several possible causes. the most common is a failure in the vertical deflection circuit due to a bad vertical IC and possibly a capacitor, zener diode and resistor.

Feb 19, 2009 | JVC AV-27530 27" TV

2 Answers

JVC TV AV-32870 will not turn on. blinking timer light


Worth taking it in since it is hard to find a new TV for less than $300. I have a 32 inch JVC iart that for about 2 years would turn itself off and the timer light would blink. Only thing that worked would be to disconnect and turn back on. Eventually, the tv "popped" I could smell something that burned out and within 3 weeks tv went "dead" Took it to a tv repair place and replaced power unit for $150. I had similar problem with a 19 inch Philips and that tv has been going strong for 4 years since repair.

Good Luck

Oct 17, 2008 | JVC AV-32820 32" TV

1 Answer

Jvc tv av-32d502 timer light is flashing will not turn on


Hello, I am a tv tech. I worked on a JVC AV-32D502 today. Problem: led flashes / no power or picture at all. Same as trobertson52's set. The microprocessor is bad in my machine. trobertson52, if your sets' relay does not click when the power button is depressed you most likely have the same problem or the standby power circuit is at fault. That circuit supplies +5 volts to the micro.

Edtal you have a different problem with your machine. Your machine is going into shutdown. A number of circuits could cause this and would need to be looked at by a technician to determine exactly which circuit is at fault. High voltage transformer (HOT) \ Vertical Circuit \ Power supply are the most likely causes.

barneyinNC

Sep 25, 2008 | JVC AV-27020 TV

1 Answer

NO PICTURE OR SOUND


i have the same trouble,i found sometimes i can unplug it and plug it in a few times and it will turn on but it dosnt do that even so i am taking it to a technician

May 17, 2008 | JVC AV-32D502 32" TV

2 Answers

Jvc av-32fa44 television


My JVC AV-32FA44 wont turn on. the on timer light blinks. When i unplug it and plug it back in i get beeping (i stoped counting at 50 beeps) then it stops and the light just blinks.

Jan 12, 2007 | JVC AV-32FA44 32" TV

2 Answers

Help ,help.


On- timer light flashing no picture no sound.

Dec 23, 2006 | JVC AV-32D502 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

827 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...