Question about Concord Camera Eye-Q 3045 Digital Camera

1 Answer

I can't capture images

Hi, wel, I can't capture photoz unless I press several times just to have a shot. What could be the problem?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 17 Answers

Digitak cameras have an auto focus in which you hold the button half way down and it will focus. a green light will appear at the top of the screen if the light is ideal for the shot. You can push the button all the way down without the half way for auto focus but you will have to hold it down for a few seconds for it to take the shot. It sounds as though you just may not be giving the camera enough time to actually take the shot.

Posted on Feb 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No image is captured by the screen itself (LCD screen works but completely dark).


Did you try pressing the display button several times? in both viewing mode and record mode? Cycle through all display modes, s you get used to the button, so it does not trow you off when it happens again.

Feb 16, 2015 | Canon Cameras

Tip

How to use the Prt Scr (Print Screen) button.


On every computer keyboard there is a <b>Print Screen</b> button. The basic functionality of this key is to capture the snap-shot/screen-shot of the current screen you are viewing on your monitor and save it as an image file. Once you click this button the screen image is captured and stored in the computer's memory (clipboard). Then you can use the <b>Ctrl + V</b> buttons together to paste it into any image processing software such as <b>Microsoft Paint, Adobe Photoshop or any other Office applications such as Word, Excel or Powerpoint.</b> Once you paste it into any of these applications you can save it and then use the image later for any purpose. <br /><br /><b><u>Here are the steps to use the print screen feature.</u></b><br />1) When you have the part you want captured from your monitor exactly as it looks, look for the <b>Prt Scr</b> or <b>Print Screen</b> button on your keyboard and press it once.<br />2) Now navigate to Microsoft Paint: <b>Start&gt;All Programs&gt;Accessories&gt;Paint</b><br />3) Once Paint is open simply press the <b>Ctrl + V</b> keys in combination to paste the screen shot, or you can go <b>Edit&gt;</b>Paste to do the same.<br />4) You can now, resize it, modify it if required and save it under any name you want for later retrieval.<br /><br /><br /><b>NOTE:</b> If you have opened more than one windows in the screen and you want to capture the snap shot of just the active window and not the entire screen, then press the <b>Alt</b> key while pressing the <b>Prt Scr</b> button. This will capture the image of the active window only<br />Now that you have mastered the art of print screen you can use this to capture error messages in applications for you to use when in need of tech support.

on Mar 05, 2011 | Computers & Internet

2 Answers

On previoius Dell products ALT-PRNT SCREEN used to capture the active window this does not seem to be an option on the E4310. How do I capture an active window?


Check if you have to press the fn (function) key on your laptop before pressing Print Screen, you can tell if they are both the same blue color.

When you press ALT+Print Screen, you only capture the active window, when you click print screen you capture the entire screen. Then you will have to press CTRL+V on your keyboard to paste into paint. If you have windows Vista, you can capture screen shots much more easily using the Snipping Tool included with Vista.


Here's a How to guide to refresh: (Ref: http://graphicssoft.about.com/cs/general/ht/winscreenshot.htm )
  1. Press the Print Screen key on your keyboard. It may be labeled [PrtScn].
  2. Open an image editing program, such as Microsoft Paint.
  3. Go to the Edit menu and choose Paste.
  4. If prompted to enlarge the image, choose Yes.
  5. Optional: Use your image editor's crop tool to crop out unnecessary portions of the screen shot.
  6. Go to the File Menu and choose Save As.
  7. Navigate to the folder where you want to save the image.
  8. Type a file name for the image.
  9. Select a file type.
  10. Click the Save button.
Tips:
  1. Hold the Alt key down while pressing Print Screen to capture only the active window.
  2. Generally the GIF format works best when saving screen shots of application windows. The JPEG format usually makes screen shots (especially those with text) blurry, blotchy and discolored.
  3. See related resources below for more screen shot tips and listings of screen capture software that offers many more options for capturing screens and portions of screens on Windows and Macintosh computers.
  4. The Windows "clipboard" is a term used to describe the temporary storage space in memory where an item is placed when you copy or cut. When you paste, the item is transferred to the program you're working in. If you copy something else, the old item is replaced with the new. You can't manipulate the clipboard directly; it's only used for copy and paste operations.
Good Luck

Jun 06, 2011 | Dell Latitude E4310 Laptop Computer (Intel...

1 Answer

THE LCD PICTURE IS CLEAR AND WHEN I PUSH THE BUTTON TO SHOT, IT STARTED TO BLURD THE PICTURE AT LCD AND PICTURE RESULT ALSO IS BLURD.


Hi chicbenzon_1 ,

The LCD picture is clear indicates that the lens is clear enough to capture the image, if there would be any disturbance on the lens you would come to know on the LCD itself.


When you push the button to shoot , it could be that you are pressing the button just half way which is a function used to focus on the object before full press of the button or actual shot of the image.

I would recommend you to half press the button till you focus on your image and then when your hands are steady and there is no shake on the camera , go ahead and press the button full which would result in the image being taken.

Hope this helps ...:)

May 11, 2011 | Olympus FE-320 Digital Camera

1 Answer

I have sony v1, unfortunately it was dropped, now the problem arises that you can see previous stored pics in lcd but when you want to capture the image, nothing is displayed and if you take the picture it...


Hi,

Based on the information you've provided it seems that the CCD Image Sensor of the Camera is affected which displays the live view of the Camera and the image which get captured. If the Image Sensor is affected, the previous views of the images and the icons will get displayed as normally, but the live view and the captured images will be distorted or blacked out. You may try power resetting to check if the issue can be resolved.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.


If the issue persists, service may be required.


Thanks for contacting FixYa.

Feb 24, 2011 | Sony Cyber-Shot DSC-V1 Digital Camera

1 Answer

When I push the power button the lense moves in and out several times then the camera just turns off. I tried charging the battery and holding the power button down for 10 sec. but still does the same...


The power button has two purposes explanable;
1. A firm press and hold would shut down the entire device, where would be common feature for the camera to perform a system check to include the lense functionalilty.

2. A gentle press and release of the same power button should capture a snap shot only after the camera has been powered on, by the similar process as pressing firmly the power button

Remember

Pressing firmly the power button would shut down camera completely after a system check if only the camera was on.

Pressing firmly the power button when the camera is off would turn on the device by performing a system check also.

Important note
The camera when powered on would have an indicator light of ready to capture snap shots.
The camera would autoshut down when left on for an extensive duration without capturing snaps.
The instance of such would generate a camera check once more before powering off completely


The lense adds to the cameras feature capabilities of acquiring images. a function of the lense is capture an impressive image where the mechanism of drawing closer to the object is made possible by a moveable lense. The Olympus FE-340 Digital camera is powered by a battery requiring sufficient energy for a snap shot. keep in mind that, the camera can perform without the lense. However, the device is designed to automatically responded whenever the lense is required.

Important note;
1 a solution to the camera is with the source of energy in which instance batter power.
2.Dislogde the entire power area consisting of battery, check for improper installation; reinstall the battery in appropaitely noticing the installation indications of power supply. Cover the battery compartment properly, and charger afterwords.

Caution
1.Charge the battery for the entire duration known of a full charge.
2.Unplug thereafter when the full charge indicator is visible.
3.Try on the device for improvement in situation by taking photo snap shots

Dec 02, 2010 | Olympus FE-340 Digital Camera

3 Answers

How do i print screen on my acer laptop? i see the PrtSc button but it isnt working


It's NOT really straightforward, but is doable.
Here's How:
  1. Press the Print Screen key on your keyboard. It may be labeled [PrtScn].
  2. Open an image editing program, such as Microsoft Paint.
  3. Go to the Edit menu and choose Paste.
  4. If prompted to enlarge the image, choose Yes.
  5. Optional: Use your image editor's crop tool to crop out unnecessary portions of the screen shot.
  6. Go to the File Menu and choose Save As.
  7. Navigate to the folder where you want to save the image.
  8. Type a file name for the image.
  9. Select a file type.
  10. Click the Save button.
Tips:
  1. Hold the Alt key down while pressing Print Screen to capture only the active window.
  2. Generally the GIF format works best when saving screen shots of application windows. The JPEG format usually makes screen shots (especially those with text) blurry, blotchy and discolored.
Yes - the PrintScreen button is really mis-named.

You can find programs that do a far better job of capture screen images. Like this one.. http://www.etrusoft.com/

Nov 30, 2010 | Acer 91.63X07.001 Keyboard

1 Answer

Shutter release pressed the image captured is all white??


Hi,
    The lens bolck assy star malfunctioning.For this you have to change the LENS BLOCK ASSY.
You can contact any sony service centre nearby to you. For your convenience please visit:
www.sony.net
or
www.sonyworld.com
Here you can find contact info of nearest service centres.
Thanks for using FIXYA. 

Jan 30, 2009 | Sony Cyber-Shot DSC-T1 Digital Camera

1 Answer

Black screen, not capturing photos


have the same problem...
it happened about a month ago and i pressed the display button and it worked, but now that doesn't work either!

Jul 22, 2008 | Canon PowerShot SD1000 Digital Camera

1 Answer

Why does the camera take so long to take a picture?


You may be pressing the shutter all the way down at once. This forces the camera to focus, make exposure adjustments, and capture the image all at once. By pressing the shutter button partially to focus, then the rest of the way to capture the image, your camera can process pictures more quickly. You can turn on quick shot mode to take pictures quickly.

Sep 13, 2005 | Epson PhotoPC 850Z Digital Camera

Not finding what you are looking for?
Concord Camera Eye-Q 3045 Digital Camera Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Concord Cameras Experts

isaac johny
isaac johny

Level 3 Expert

796 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Robert McCord
Robert McCord

Level 2 Expert

70 Answers

Are you a Concord Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...