I have aMotorola razr v3. it worked fine but now even though you get a good signal when you try to place a call i keep getting a call failed message. When you try to call the phone from another line iit goe s to voice mail. Is there any solution?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'
It's because you or somebody already entered too many wrong codes, you
just have to leave the Motorola RAZR V3 ON with the errors message and
after 40 minutes to 2 hours the message "Enter Code Special" will appear
you can get in touch with motorolla for replacement or find one online .. the motorola razr is not sold through att anymore and is being discontinued through alot of carriers..good luck finding another one more of your options are goin to be online though .. motorolla's # is 800-331-6456 800-657-7576 (Windows Mobile Support)
sounds like a signal problem check the bars of signal on your phn might be the antena try placeing your sim into one of the other razers and see if call goes through and let your service provider know they can send all info to phn like a new activation might be a issue where you cant connect to a tower if thats the case youll need to talk to your service providers tech department and have them check for the lrn easy way to see call your phn and see if you get dead air or fast busy signal
Oh yes, I've had this problem before too. It's a service provider block. They make it so that you cannot send files to other phones so that they can make more money.
Some service providers do it, some don't.
man... it's a software and hardware problem... go to your nearest cervice center and they will fix it up.... 1st your problem is they have to check your firmware . but what i'm sure of is,, your going to change the flex, it's the ribbon part of your fone connected to the main board to lcd......tnx man...
Its common with motos razors to get freeze ups. I even heard about it happening when sending sms or working on the calendar.
If you think it might be the humidity, you could try putting it in an airing cupboard for a few days, with bat disconnected.
If nothing works, try getting it fixed on warranty if valid, just don't mention the humidity part ;]