Question about Office Equipment & Supplies

1 Answer

C13F5 error I have a minolta DI550 copier with this error. The laser unit has been replaced, and the wingnuts? removed. Where do I go from here?

Posted by on

  • 1 more comment 
  • Dale Richards
    Dale Richards Feb 15, 2008

    My tech said that there was an adjustment procedure that he did, and a few things that had to be reset. He said it did not do anything.

    So, I guess I would say, yes.

  • brian c
    brian c May 11, 2010

    That is strange. The error is a laser intensity adjustment failure (which I'm sure you already know).

    Could be a dirty sensor somewhere that reads the printed pattern during the adjustment process.

    Has he cleaned / vacuumed out the drum carriage, etc?

  • brian c
    brian c May 11, 2010

    Have all of the write unit adjustments been performed?

×

1 Answer

There is a small IC board under a cover in the optical secsion near the scanner, open the cover and change that small board, its called IC something, If ya need further info let me know, Ill look up the part #

Posted on Feb 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My question about Minolta di470 error c13f5 code


Print Head (Laser) is bad. See if you can get one (PRINT HEAD) LASER you can not buy parts for the print head it come as one

Nov 14, 2015 | Minolta Office Equipment & Supplies

1 Answer

Ho doI network a Minolta Di550?


Best Operating system would be Windows 95 maybe XP at best.. NOT good for Windows. Go to Konica Minolta web site see if you can get the drivers for that machine all call KMBS to see if they can help you

Go thG

May 05, 2014 | Minolta Di550 B&W Laser Printer

1 Answer

Can Minolta Di550 be networked to a computer?


If it has a print controller it will be on the left side rear. only windows 95 XP at best

Apr 25, 2014 | Minolta Di550 B&W Laser Printer

1 Answer

Di 450


replace the print head, print head houses the LASER for the machine, might try this site as a start



Precision Roller Printer Toner Cartridges Parts and Supplies Office...

Apr 02, 2014 | Konica Minolta Minolta Di450 Di470 Di550...

1 Answer

Konica minolta is not switching on


Open a front door and remove a fusing unit and turn ON the copier.If the copier turn on and appear on error code to refer a fusing unit a problem in the fusing unit.

Dec 16, 2013 | Konica Minolta Minolta Di450 Di470 Di550...

1 Answer

Minolta di550 error code c-13fc


Image processing board or the Print head ( What houses the LASER inside the machine they are not talking to each other so that code is displayed. Check the connections , I would go with print head 1st. Di550 is a legacy Minolta machine, might be tuff finding a print head as for Image control board WOW! Home and close front door resets if it comes back need above

Nov 19, 2013 | Minolta Office Equipment & Supplies

1 Answer

Of 24 error


Cof 024 - AIDC sensor contamination correction failure.The photosensore LED located under OPC drum of the AIDC sensor dirty.Clean the sensor,reset the malfunction code if the necessary perform F5 AIDC auto adjustment.

Mar 06, 2013 | Minolta Di550 B&W Laser Printer

1 Answer

I have a controller error 1808 in Minolta controller pi5501


SCSI communications unit failure. Check all connections in the print controller, does the machine work ok with out the controller will it print without the controller print directly to the copier check the cable between the print controller and copier bent pin at one end

Dec 08, 2010 | Minolta Di550 B&W Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

374 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...