Question about Printers & Copiers

1 Answer

R300 printer changed cartridges and wont print cleaned nozzles ,heads

Posted by on

  • 3 more comments 
  • tractorwomen Feb 15, 2008

    won't print

  • blacktie Feb 15, 2008

    installed new cartridges,printer goes through motions of printing but nothing prints.Cleaned heads align them etc.nothing prints at all.

  • Anonymous Mar 19, 2008

    magenta and cyan is empty. we replace them but still printer say empty and
    could not print.

  • Roman Haraburda
    Roman Haraburda Mar 19, 2008

    my 2 year old R220 suddenly started printing blank pages during a nozzle clean and check procedure. Tried 2 new sets of inks+SSC utility + system restore+ reinstalled drivers and NADA !!!!! All this is very stange becuase ink flows during the clean process, the Monitor shows the ink levels but dont undesrtand why it goes through the motion of printing but nothing is printed??!!!

  • shelld Jan 31, 2009

    Same problem...I have had great success in the past cleaning the print head on an inkjet printer but first and foremost you have to gain access to the print head....what's the easiest way to gain this ...my black ink prints perfectly ...should I start tearing this baby down to try cleaning the color nozzle area ?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Printhead nozzles and waste station are completely clogged, a new Printhead is more than the cost of unit, then you also have replace waste pads then clean and service the unit. Makes more sense to replace the unit with a new model, then to repair.

Posted on Feb 16, 2008

1 Suggested Answer

  • 1 Answer

SOURCE: epson r300 printer

there is a strip to remover over the bottom conection. take that off and you will be find.

Posted on Jun 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stylus r300 printing orange photos why


Follow these steps to clean the print head from the printer's control panel:
1. Make sure the printer is turned on but not printing, and the red
b error light is off.
If the red light is flashing or on, you may need to replace the ink cartridge.
2. Press the down button to highlight More Options, then press OK.
3. Use the up or down button to highlight Head Cleaning, then press OK.
4. To begin cleaning, press OK.
While cleaning, the printer makes noise and you see a progress bar on the control panel
display. Cleaning takes about 30 seconds.
Caution: Do not turn off the printer or interrupt the cleaning process.
5. When the cleaning is done, run a nozzle check to confirm the print head nozzles are
clean.
Make sure letter-size plain paper is loaded in the printer, then press Stop. The nozzle check pattern prints.
6. If the pattern has gaps or missing dots, press Stop to clean the print head again.
If the nozzle check pattern looks correct, press OK to finish.

Note: Run nozzle check at least three consecutive times. If you do not see any improvement and you have replaced the ink cartridges, your product may require service.

Feb 14, 2013 | Epson Stylus Photo R300 InkJet Printer

1 Answer

Hp 8500 printer stuck in continuous cleaning and alignment loop after replacing cartridge


Printer wont do the alignment process if we replaced the cartridges, might be removed/re inserted the printer heads, then ply it process the alignment, if the print head nozzles are clogged, alignment process wont completes..
>Remove the print heads clean the nozzles with tissue paper gently at nozzles.
>borwse this link & see how to clean the print head,link:http://www.youtube.com/watch?v=ZAwYIbjswV0&feature=related
>Install the printer heads do the alignment..
> if not completed check which printer head clogged, replace the print head.

Oct 04, 2011 | HP Officejet Pro 8500 Wireless All-In-One...

1 Answer

Printer worked fine until yesterday changed ink cartridges now black wont work tried all options


Hello

well changing the cartridges will not effect anything to the printer but the duration taken for replacement will. As in epson if you leave the printer without cartridges will clog the head nozzles. Did you remove the cartridges and turned off the printer and left idle for sometime? if yes then follow the instructions below

1. Print nozzle check test print to know which nozzles are not working
2. Head cleaning from the printer software.
3. Perform step 1 again to see the difference after cleaning

IF NO

Then you have to take the print head out of the printer and clean the nozzles by using hot water in the Syringe and blowing the derbies out of the nozzles.

Jul 17, 2011 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Epson r300 - banding problems on print out


Nozzle check is fine? I am not sure. Check again. There is transverse and vertical lines. Is it perfect? Turn off printer, move head to center, put wet tissue with hot water at head cleaning mech. (pad). move head to parking position, wait for 15 minutes, repeat for 3 times. Check nozzle.

Jun 11, 2009 | Epson Stylus Photo R300 InkJet Printer

1 Answer

Epson r300 printer


there is a strip to remover over the bottom conection. take that off and you will be find.

Jun 08, 2009 | Epson Stylus Photo R300 InkJet Printer

1 Answer

Everything is coming out pink


one of your ink cartridges is low. Annoying I know, since its not empty, but happens a lot.

Dec 14, 2008 | Epson Stylus Photo R300 InkJet Printer

2 Answers

Blue tint suddenly appearing on all my photos


you may need to run a clean on ur nozzles and check if you are low on ink.

Jun 13, 2008 | Epson Stylus Photo R300 InkJet Printer

1 Answer

Black not printing


its seems your printer needs servicing

May 30, 2008 | Epson Stylus Photo R300 InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

1,341 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96372 Answers

old marine
old marine

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...