Driver for rtl 8139D

I have install intex rtl 8139D lan card when i run lspci command, it show output below
00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 945G Integrated Graphics Controller (rev 02)
00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:01.0 Ethernet controller: Unknown device 1904:2031 (rev 01)
01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8167 (rev 10)



when i load module 8139too, it load module but after it lan card card does not show when i run ifconfig
i tried r1000 driver but still problem persist
please help me to solve this problem
thanks