Question about Philips 60PP9202 60" Rear Projection HDTV-Ready Television

2 Answers

Hooking up computer to philips 60pp935217 AV5 HDTV connector?

Yes i tried attaching my computer to the philips 60pp935217 AV5 input section. by connecting monitor plug to the same monitor plug thats on the back of the television panel.

when i start the computer, the video works just fine, shows the boot up, and windows it loading but once it gets into windows all i get is horizontal line gaps of green, blue, and yellow squiggling on the screen whenever i try to access AV5 video when i switch to AV1 the tv comes on, an able to watch tv, an when i select other AV#'s they tend to work as well for the components i have them assigned. but whenever i go to AV5 i dont see my windows platform. just squiggly lines.

can i just connect monitor wire from computer display card to the HDTV input? or do i need to have a video card that has HDTV output and connect the wire from that to the back panel of the TV's AV5 input?////

please help?

roger

rojere3@yahoo.com

Posted by on

  • rojere Feb 15, 2008

    ok originally i had my computer up an running, desktop sorry. with the video card i had, i used both a monitor and used the monitor plug on the back of the HDTV as an extended monitor. so when computer was up an running, i had 2 screens. on monitor was screen one and the HDTV was screen 2. i am not trying to watch tv through my computer. i want to use the philips HDTV as a monitor thats all. i was hoping i could just plug in the HDTV as the monitor without having to setup an additional monitor. or do i have to have both operational?

    i then, disconnected everything and put the computer in the bedroom. but now i built another tower a similiar tower/desktop
    and thought that i would just put that one out in the living room. and hook that one up to the HDTV but i forgot how to go about doing it.

    i remember having the monitor hooked up as screen 1 an HDTV was extended screen. but this new tower that i built i dont have monitor for it thats why i was hoping i could just plug the monitor wire that can go from the back of the computer to the HDTV AV5 since its the same cord that a monitor uses yes?

    like i said.. the HDTV when switched to AV5, you see the dos bootup like screen, then it goes into loading windows... but right after that poof it just goes squiggly lines i can't make out anything to see the settings to adjust the settings... its impossible to see.

    i lost both the manual an the original remote to the tv, so i am using universal remote at moment. so not sure how to turn on the HDTV settings.

    with universal remote,
    maybe i need to use menu system to setup the AV5 setting?


×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi Roger,

Initially, pls try lowering the screen resolution of your PC. This can be done at the Display Properties/Settings tab and then move the slider of the Screen resolution towards the left, Apply OK. In some instances, you need to also lower down the Screen refresh rates in the Monitor tab of the Advanced Properties.

If your concern has not been corrected after completion of the above procedures, then other methods can be considered.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Posted on Feb 15, 2008

  • Louie  Role
    Louie Role Feb 16, 2008

    Hi again Roger,

    My initial post was in response to your description of "just squiggly lines." If you have tried lowering your PC's screen resolution pls post back results.

    In your current setup of the 2nd/new PC using the Philips 60PP935217 monitor, pls try to boot in safe mode which should normally allow you to adjust/lower the screen resolution.

    Cheers.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 579 Answers

You don't say what king of computer you have. Laptop or Desktop?
Most laptops have a monitor output jack but they can only run either that or the laptop display, not both. To run the TV off that jack there is usually a keyboard key that switch it back and forth. If the laptop supports dual monitors, you can enable the second one by going to the display setup page.
Most desktops only support one monitor, so you would have to dedicate your TV to the computer.
Many video boards have a composite video output (little yellow jack) that can go to an AV input on the TV and is usually the simplest way to go for video only applications.
Hope Ya Fix It!

Posted on Feb 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Idk if my tv is digtal ready it says its hd


The TV will provide an HD picture with a set top box connected to the HD input (AV4 or AV5). It does not have a digital tuner (only a NTSC analog tuner).

The manual is available here: http://download.p4c.philips.com/files/5/51pw9303/51pw9303_dfu_aen.pdf . See appendix B on page 58 for the specifications.

I hope this helps.

Cindy Wells

Apr 19, 2011 | Philips 51PW9303 51" Rear Projection...

1 Answer

55" Philips rear projection HDTV..


that input is called DVI digital video interface it is only for video. there should be some red and white composite input jacks for the audio near the DVI connector. you will need to hookup the red and white cables from the tv to the cable box or dvd player or whatver you are using. good luck

Jan 06, 2011 | Philips 55PW9363 55" Rear Projection...

1 Answer

BLUE CONVERGE NOT WORKING


most likely convergence IC's usually 2 of them

Aug 10, 2009 | Philips 60PP9202 60" Rear Projection...

2 Answers

Phillips 60pp935217


I have a phillips HDTV monitor model 60pp935217, i don't get an hd picture but i do have sound. Please help.

Apr 08, 2008 | Philips 60PP9352 60" Rear Projection...

1 Answer

No av5 in menu


it becomes visible after you hook up a dvi to hdmi adapter

Jan 01, 2008 | Philips 51PW9363 51" Rear Projection...

1 Answer

Philips Projection model #51PP9303H17 AV5 input not working?


After many hours of research, I was able to fix the missing AV5 channel. I had to access the service menu using code 062596 and the Status/Info button on the Philips remote. There was an error message that had to be cleared and then AV5 needed to be turned on in the options menu. While I was in there, I also turned on the WSCR option, giving me two additional wide screen aspect settings that had also disappeared. I advise you not to go into the service menu unless you do your homework and document each setting before you make changes. Good Luck!

Nov 29, 2007 | Philips 46PP9302 46" Rear Projection...

Not finding what you are looking for?
Philips 60PP9202 60" Rear Projection HDTV-Ready Television Logo

949 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...