Question about RCA F27645 27" TV

1 Answer

Sony TV model KV29F3U

TV takes long time to show picture when switched on
The TV then blinks all the time
Sound ok and quality of picture good

Posted by on

  • johnp1 Feb 18, 2008

    I am not sure how to go about taking the back off or even where I would find or check the capacitor.

    Otherwise seems helpful if I new how.

    Are there any pictures to show me step by step procedure?

    johnP

  • Anonymous Jul 07, 2008

    I have a KV29F3U. The problem is most likely to be indicative of a failing CRT. Ours had the voltage boosted but the improvement only lasted 3 months. You will probably find it is time for the skip.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Check high voltage rating capacitor hoirzontal output or around the the flyback transformer. if you need my help....dnlsabangan@yahoo.com

Posted on Feb 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Finlux tv showing black screen after switching on by remote. standby light is flashing buy mo picture or sound


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.

Oct 08, 2016 | Finlux Televison & Video

1 Answer

I HAVE A SONY-KV-ES34M61TV,PICTURE GOOD,SOUND GOOD BUT LIGHT BLINKIG FIVE TIMESWHEN NOT PICTURE ON TV SCREEN FLESHING LIGHT IS STOP, PICTURE GOOD,SOUND GOOD BUT IN SELF DIAGNOSTIC SCREEN DISPLAY 005:255,IT...


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
Type in the brand name of your device, in the search box [at the top right] of the display window, and press enter to get all related posts. It will make surf easy.

Feb 11, 2015 | Sony Televison & Video

1 Answer

In Samsung tv complaint<br/>in first time tv working in normal and after sometime picture is blinking and slowly no pictre. that time sound is also ok.<br/>after that am am change the capa


Check its solder terminal at the CRT board [Filament voltage]. It sounds like the filament do not glow after some time due to a loose contact at the CRT base connector sockets. Check it.
http://electronicshelponline.blogspot.com/
If this does not help, check the ABL circuit for any open resistor.

Oct 25, 2014 | Televison & Video

1 Answer

I have LG 32LC46-ZC TV. It suddenly stopped working, no picture, no sound. The LED blinks 5 times after turning on, but nothing else. Any suggestions?


These blinks (flashes) are fault indication. By the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside the TV. Count the blinks occur at one time switch ON, carefully. Do it once again, and make sure about the number of blinks. If the flashes are continious, non-stop, the main system control IC should be suspected. If you wish to get more details, check the site linked here. It has blinking codes detail to many brand TVs. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/

Jan 19, 2014 | LG Televison & Video

1 Answer

I have a Sony Trinitron 32" TV. The picture don't


Hello
Blinking of standby light in Sony sets are fault indications. You just count the number of blinks occur at a time, by switching the set ON-OFF by its front panel power switch, not by the remote control handset. Just do it for at least three or four times, count the exact number of blinks occurs there, and inform it to me through Fixya. Through the number of blinks, I can locate the faulty section, of somtimes to the exact fault location. Count it keenly and inform me. OK.

Dec 16, 2010 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

The stand by lite flashing I have sound but no picture


Hello
Blinking of standby light in Sont TVs denotes fault indication. You just count the number of blinks occurs each time you switch on the TV. Please switch it ON and OFF by its front panel power switch, and not with the remote control. Do it three or more times, and keenly look at the number of blinks; confirm it, and send it to me through Fixya. OK.

Dec 02, 2010 | Sony KV-32XBR250 TV

1 Answer

My tv is a sony wega kdf42we655 and i have no picture and no sound and the lamp light keeps flashing


Lamp is dead/ broken in your tv and need to be replaced as lamp light blinks showing that problem.
Lamp replacement procedure is easy and written in user manual.
Buy Sony original lamp for good picture quality and replace it as mentioned in user manual.
Click Sony Support to download user manual free copy, if required.

Jul 18, 2010 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

No picture, sound works on Sony TV KV-27V22.


try to adjust the screen. it is located behind the CRT board.(CRT board is the board that attached to the picture tube) you will find a black knob which label screen adjust it by turning the knob.

Jul 04, 2009 | Sony KV-27V22 TV

1 Answer

No picture; No sound


how many times does it blink red? It should blink so many times then stop then blink again. how manty times does it cycle?

Jan 02, 2008 | Sony KDF-E42A10 42 in. LCD Television

Not finding what you are looking for?
RCA F27645 27" TV Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75767 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...