Question about Dishwashers

1 Answer

INDESIT IDL505 DISHWASHER(2nd hand working fine for 3 months) started to notice some light/slight streaking, misting especially glasses(annoying but not to much of a problem) then about two weeks later heavy streaking,glasses totally misted completely did have a brief problem with water inlet solenoid but checked it and its working properly (only malfunctioned once) i refilled the salt container and put on a simple wash and found that it used about half the salt in the container,changed the hard water setting on the salt container ,-,middle ect made no difference,also the rinse aid container was still quite full (even though it should have run down by now}and was diluted (as if water had somehow got in to it so i drained it and refilled it)checked its solenoid and the rinse aid compartment operation and it was working fine the only conclution i can come to is the water softener unit solenoid is malfunctioning but i checked the operation of this solenoid and it was working

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Dishwashers Master
  • 3,614 Answers

Maybe the machine got a leaked inside..

Posted on Feb 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Indesit dishwasher IDL505 green light flashing water not entering the machine


Hi,

Here is a tip that will help you to find out why water will not come into the dishwasher...

Dishwasher Trouble No Water entering Dishwasher

heatman101

Aug 27, 2010 | Indesit 24 in. IDL500 Built-In Dishwasher

1 Answer

Muretec mfx 1430 streaking through the adf and its not the **** glass. Off the glass looks fine have swamped out the whole feeder twice same problem.


Hello sir; Let's try two things , 1st, make a copy go through by ADF. 2nd, make another copy direct from the glass. if 1st one coming out with streak line that's mean on the left hand side of the plateform have a piece long strip glass need to clean.
if streak line coming out from 2nd copy that's mean you need to replace drum cleaning blade.

Mar 13, 2009 | Muratec MFX-1430 Copier

1 Answer

Indesit dishwasher DI 450 stops after 10 mins


my disher washer dls 535 starts programme then lights 2 and 3 start flashing and does not work

Nov 19, 2008 | Indesit 18 in. D41 Slim-Line Free-standing...

6 Answers

Green flashing lights , what does it mean ?


I have an Indesit IDL 500, the machine will start fine but after about 20 mins the Ist and 2nd button start flashing. Can you help?

Regards
Ingrid Houben

Jul 06, 2008 | Indesit 24 in. IDL500 Built-In Dishwasher

1 Answer

Indesit IDL40, 2nd & 3rd light flashing


It can also be that the pressure is too week. If you look a tthe manual it mentions this exact symptom. I know because i ve a similar issue. cheers

Dec 13, 2007 | Indesit 18 in. D41 Slim-Line Free-standing...

1 Answer

Indesit Di 67


Tilt your washer forwards. Water will leak from the front but once this has cleared your dishwasher should be ok again. I paid an engineer to come and tell me this. If your dishwasher is not completely level this can sometimes happen. Hope this helps.

Oct 18, 2007 | Indesit 24 in. DI67 Free-standing...

2 Answers

Indesit D167. When cycle selected no water pumping or filling but 1 & 2 green indicators on.


Tilt your dishwasher forwards. Be aware that water will come out ouf the bottom. Once this is clear your washer should be Ok.
Good Luck

Sep 23, 2007 | Indesit 24 in. DI67 Free-standing...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

yadayada
yadayada

Level 3 Expert

67911 Answers

Brad Brown

Level 3 Expert

14725 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...