Question about Panasonic DP-C354 Copier

1 Answer

E04-14 error code

I'm getting E04-14 code every now and then just pops up. Already replaced the fan and board.
Tony

Posted by on

  • GuestTech May 11, 2010

    Which board have you replaced?
    Greg

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

If your standing facing the back of the machine, you will need to change the top right fan that cools the IH,power supp. there are two fans which need to be replaced, the other fan is behind the sc pcb but that will give a different error.

Posted on Mar 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

0B0007


The error code means the vacuum fan is not detected.
Replace the vacuum fan. If that does not fix the problem, replace the Main Logic board. The fan can be ordered from: Designjet 5000 5500 Vacuum Fan and the PCA from: HP Designjet 5000 5500 parts

Jun 26, 2014 | HP DesignJet 1050c plus InkJet Printer

1 Answer

HP 8100 dn error code of 57.5 comes up, power cycle down does not fix the problem


HP LASER PRINTER 8100, 8150 ERROR 57.5 code

1. The fan 1 or the laser/scanner fan has occurred.

2. Replace fan 1

3. Replace the D.C. controller board.


Try reseating the connector to the fan, it may have worked loose.

May 18, 2012 | HP LaserJet 8100dn Printer

1 Answer

Erorr code c49 in di470 photo copier


Hi this error code is an issue with paper source option vertical transport cooling fan motor or the control board check and replace motor if it dose not resolve the issue change the control board If you check vertical transport cooling fan motor rotation the voltage across pj14a-3 on power supply board and ground is dc0v after malfunction os reset
if yes change control board if no check cooling fan motor and replace it

Jan 27, 2011 | Minolta Printers & Copiers

1 Answer

Hp Cp6015 printer has 50.7 Error code fuser has already been replaced


this error could be caused by the new replacement fuser or your DC controller board. I would return the fuser that you just put in for another first. And if the issue is still there then try a new DC controller board.

Jun 30, 2010 | HP LaserJet CP6015dn Printer

1 Answer

HP 8150 error code of 57.5 comes up, I cycle power, I have checked all the cables and still comes up with error code. Does anyone have any suggestions?


Hi


Error code 57.5 in HP 8150 means that printer fan error has occurred with the power supply fan. This issue can also be due to laser/scanner fan. Make sure both the fans are working perfectly fine. If the fans are fine, then the error is due to DC controller board.

To resolve this error turn off the printer for 4-6 hours (atleast 4 hours), this will reset the error. However, even after 4 hours you still can see the error then please check and replace the fan1 (power supply fan). Also, check for any burnt components on the dc controller board.

Daniel Scott

Jun 18, 2010 | HP LaserJet 8150 Printer

2 Answers

An error code of 51.10 has been popping up all day for my p4014n printer. Help!


Try this site:

http://www.printertechs.com/tech/error-codes/error-codes-50-59.php

" 51.X PRINTER ERROR A loss of beam-detect occurred. X description: 1 = Beam-detect error 2 = Laser error 1. Press GO. The page containing the error will automatically be reprinted. 2. Turn the printer off and then on. 3. Reseat cables to the laser/ scanner and engine controller. 4. Replace the laser/scanner. 5. Replace the DC controller.

Mar 09, 2010 | HP LaserJet P4014n Printer

1 Answer

Getting Machine Error E04-14


Recommended you take it out and blow fan with can air. If the fan is good then you will need to replace the circuit board:( mite order a new fan first and connected then you will know if you have to order the board unless you fill confident to locate the main board and then locate the connector on it. unless some one has unpluged the connector doubt it is lose or bent pin inside it. Best to ask for a pansonic servive provider.

Feb 04, 2010 | Panasonic DP-C264 Copier

1 Answer

I am getting an error code SC 534 on my Ricoh Aficio MP 6000.


The best I can find is that this is related to a malfunctioning cooling fan, I cannot find that specific code for your model, but all other 534 codes from that manufacturer are related to cooling fans

B010/B188 SC 534 Right fusing pressure motor HP error 1 - HP sensor defective
B010/B188 SC 534 Right fusing pressure motor HP error 1 - IOB defective
B010/B188 SC 534 Right fusing pressure motor HP error 1 - Motor defective
B010/B188 SC 534 Right fusing pressure motor HP error 1 - motor drive bound
B132/B200 SC 534 Duplex exhaust fan error - Paper exit fan motor M28 defective, indexed as 146, electrical component layout.
B132/B200 SC 534 Duplex exhaust fan error - check and or replace fusing exhaust fan / paper blocking fan
B132/B200 SC 534 Duplex exhaust fan error - replace duplex fan motors M29 or M30
B222/B224/G878 SC 534 2nd duct fan error - replace fan motor
B230/B237 SC 534 Fusing exit sensor fan error, BICU defective
B230/B237 SC 534 Fusing exit sensor fan error, Fan defective
D014/D015 SC 534 Duplex unit fan error - Fuser exhaust fan blocked or has paper in it.
D014/D015 SC 534 Duplex unit fan error - Duplex Unit fan obstructed
D014/D015 SC 534 Duplex unit fan error - Fan harness disconnected or damaged
D014/D015 SC 534 Duplex unit fan error - Fuser unit connector has paper obstruction
D014/D015 SC 534 Duplex unit fan error - Replace duplex fan
D023/D025 SC 534 Second duct fan error - replace the 2nd duct motor
D023/D025 SC 534 Second duct fan error - replace the IOB
D027/D029 SC 534 Second duct fan error - check connections and harness to fan
D027/D029 SC 534 Second duct fan error - replace fan motor
D037/D038/D041 SC 534 Fusing rear fan error: Check or replace harness
D037/D038/D041 SC 534 Fusing rear fan error: Replace BCU board
D037/D038/D041 SC 534 Fusing rear fan error: Replace fusing rear fan
D037/D038/D041 SC 534 Fusing rear fan error: Replace the DRB

Jun 13, 2009 | Printers & Copiers

1 Answer

Kyocera FS1118 mfp gives error code CF 040 after start up


do a google search for the service manual and then lookup the error code in the service manual

Jan 23, 2009 | Kyocera FS-1118 Printer

Not finding what you are looking for?
Panasonic DP-C354 Copier Logo

Related Topics:

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Printers & Copiers Experts

Mohan Sriraman
Mohan Sriraman

Level 2 Expert

490 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you a Panasonic Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...