Question about InFocus ScreenPlay 5700 Multimedia Projector

2 Answers

Epson EMP 71/51 Projector Problem

Our Epson projector has started making strange noises and I am hoping you can give me some insight as to what the problem is.
The noise is a deep click noise - like a microphone being switched on and of (hope that makes sense). It happens very sporadically - a couple of clicks then nothing, an hour later another couple.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

Are yu in the UK if so take it to your nearest epson center or ring me on 0871 597 0097 i will try to help you

Marc Engineer

Posted on Jun 18, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

When was projector serviced last? Might need service and cleaning. Agson 856-751-9048

Posted on Feb 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my epson emp 700 projector cut off after ten mins even when the fans are working


These models of projectors form Epson have a standby which the projector enters when it no longer senses video input. The fans will continue to run because they are cooling down the lamp which remains hot for a few minutes after it turns off.
This could be a problem with your computer, or dvd player, or whatever device you are using for your movies. Check to make sure these are working properly. Check to make sure that your dvd player or computer is still outputing video to the projector.
If this does not fix your problem, then the problem could lie with the projector itself. The projector fans may not be properly cooling the lamp, in which case the projector will turn off the lamp to ensure the projector is not damaged. To fix this, you could check if the fan outlets on the projector have become clogged with dust. If they have, definitely clean them out with compressed air.
Hope this helps.

Apr 12, 2011 | Epson EMP-740 Multimedia Projector

2 Answers

The cooling fan stop working on my Epson EMP 700 Multimedia Projector, can I get a replacement part and replace it myself?


The temperature indicator is red.
The projector is overheating, which turns the lamp off
automatically. Let the projector cool for a few minutes,
then turn it back on. Make sure nothing is blocking the
ventilation vents.
If the projector continues to overheat after you clean the air
filter, the problem may be caused by damage to the cooling
fan or internal circuits. Contact a qualified service person.
¨ Warning: Do not attempt to service this product yourself except
as specifically explained in this User's Guide.
Representative : EPSON AMERICA, INC.
Address : 3840 Kilroy Airport Way
MS : 6-43
Long Beach, CA90806-2469
Telephone : (562) 290-5254

Jan 17, 2011 | Epson EMP 700 Multimedia Projector

1 Answer

Hi, I cannot find my instruction manual for my Epson EMP-S5 projector and I need to replace the lamp. Can you provide me some ideas on how to go about it? Thanks


Hi

Please visit this link, click HERE. You will find the Documents and Manuals online for this product. You can also visit http:support.epson.com.

Hope this helps

Apr 01, 2010 | Epson EMP-S5 Projector

1 Answer

I have an Epson EMP TW10. I have replaced the lamp but it will not illuminate. The temperature warning light flashes red permanently after switch on.


Hi

Can you check the filter for the projector, looks like a screen underneath or on sides, open and clean it up.

Hope this helps

Mar 26, 2010 | Epson EMP-TW10H Multimedia Projector

1 Answer

Projector epson emp-30 in error


i have one that work but there are red bars on the display, for sale 50.00 no lamp

Mar 22, 2009 | Epson EMP 30 Multimedia Projector

2 Answers

4got the password for the epson emp s3 LCD projector


The factory default password is to hold down the number button and press 1793 on the remote control. Hope this helps, please take a moment to rate this solution.

Jan 29, 2009 | Epson EMP 52 Multimedia Projector

1 Answer

Epson emp s3 lcd projector - 4got the password


The default password is to hold down the number button and press 1793 on the remote control. Hope this helps, please take a moment to rate this solution.

Jan 29, 2009 | Epson EMP 52 Multimedia Projector

1 Answer

Projector problem - Epson EMP-S1H Multimedia Projector,


try to reset lamp by using menu, up, down and enter buttons. also reset the filter and try again.

Viren

Nov 24, 2007 | Epson EMP-S1H Multimedia Projector

Not finding what you are looking for?
InFocus ScreenPlay 5700 Multimedia Projector Logo

Related Topics:

657 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Multimedia Projectors Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you an InFocus Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...