Question about Microsoft Windows Vista Ultimate Edition

1 Answer

No tv signal on wake up

My pci tuner can't get signal upon wake up from sleep. After full shut down and start up works fine. All was ok until installed a new gigabyte mb. even tried reinstalling vista, did not fix the problem

Posted by on

  • bradiator Feb 15, 2008

    No I am using my keyboard. All other funtcions on the computer work. The computer recognises that it has installed tuners, but neither will pick up signal unless it has been shut down and restarted.



    Note the problem is the same from both s1 and s3 sleep modes.


  • bear001 May 11, 2010

    are you pushing the power button to resume from sleep mode?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 77 Answers

I recently dealt with the same problem. Client had upgraded to Vista on a Gigabyte M-board equipped desktop, and sound was absent until reboot, whenever PC was aroused. Client wanted me to reinstall Vista. Installed with all peripherals connected and loaded all unrecognized drivers after install. Still same problem, and nmoticed many other features disappeared after wake-up as well (extra/dedicated keyboard functions, scroll wheel on mouse, PCI-based PCMCIA card and the modem!). Sound was all my client cared about, so I wrote mfg. and got this response: Our driver is OK, follows all Vista uniform specs and addresses S1/S3 properly, but Vista does not have all its wake up from suspend/hibernate resolved, for many of our components/drivers. This is a Vista problem that MS assures us is being addressed". Client was not happy with "waiting for MS to address the envelope, please" so we reinstalled XP 64b and all works fine now. This is also your choice: wait till MS-hell freezes over, -or go back to XP. (or install Linux). Sorry. Apparently, some Vista problems just can't be "addressed yet".

Posted on Feb 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It won't start it just has apple on screen


hi


try to reset your phone



To reset i Phone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds. During this time, a red "power off" slider may appear and the screen may go black, but do not release Sleep/Wake and Home buttons until the Apple logo appears.

If i Phone won't turn on, or the display freezes or doesn't respond

  1. Press and hold the Home button for at least six seconds, until the application you were using quits.
  2. If that doesn't work, turn i Phone off and turn it on again. Press and hold the Sleep/Wake button on top of i Phone for a 10 seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
  3. If that doesn't work, reset i Phone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears


More resets:

Try This:
1. Remove Sim Card
2. Hold in 'Home' button and 'On/Off' button together until Apple logo appears
3. Replace Sim Card
4. Hold in 'Home' button and 'On/Off' button together until normal phone screen appears.


Also, Try this:
1.) Shut down the i Phone 3G.
2.) Start up i Tunes
3.) Hold down HOME button on the i Phone 3G
4.) While keeping the HOME button depressed, plug in the Sync cable
5.) A message will pop up to ask if you want to reset.
6.) Just click YES and the reset process should start.

if this was helpful kindly vote for this answer..


thank you

Dec 22, 2010 | Apple iPhone 3GS Black (16 GB)

1 Answer

Installling the software operating sytem on a IPhone


Download the latest iTunes to your computer and reset the iPhone. Then re-sync it.

Reset


To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds. During this time, a red "power off" slider may appear and the screen may go black, but do not release Sleep/Wake and Home buttons until the Apple logo appears.

If iPhone won't turn on, or the display freezes or doesn't respond

  1. Press and hold the Home button for at least six seconds, until the application you were using quits.
  2. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a 10 seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
  3. If that doesn't work, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears


More resets:

Try This:
1. Remove Sim Card
2. Hold in 'Home' button and 'On/Off' button together until Apple logo appears
3. Replace Sim Card
4. Hold in 'Home' button and 'On/Off' button together until normal phone screen appears.


Also, Try this:
1.) Shut down the iPhone 3G.
2.) Start up iTunes
3.) Hold down HOME button on the iPhone 3G
4.) While keeping the HOME button depressed, plug in the Sync cable
5.) A message will pop up to ask if you want to reset.
6.) Just click YES and the reset process should start.

Dec 18, 2010 | Apple iPhone 3G

1 Answer

My 3gs iphone has started making a screeing sound when I make or receive a call


Reset it:


To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds. During this time, a red "power off" slider may appear and the screen may go black, but do not release Sleep/Wake and Home buttons until the Apple logo appears.

If iPhone won't turn on, or the display freezes or doesn't respond

  1. Press and hold the Home button for at least six seconds, until the application you were using quits.
  2. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a 10 seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
  3. If that doesn't work, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears


More resets:

Try This:
1. Remove Sim Card
2. Hold in 'Home' button and 'On/Off' button together until Apple logo appears
3. Replace Sim Card
4. Hold in 'Home' button and 'On/Off' button together until normal phone screen appears.


Also, Try this:
1.) Shut down the iPhone 3G.
2.) Start up iTunes
3.) Hold down HOME button on the iPhone 3G
4.) While keeping the HOME button depressed, plug in the Sync cable
5.) A message will pop up to ask if you want to reset.
6.) Just click YES and the reset process should start.


Then download the latest iTunes to your computer and Then re-sync it.

Dec 17, 2010 | Apple iPhone 3G

1 Answer

I think the display screen on my iphone 3g went out. how do i check?


Reset the phone:


To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds. During this time, a red "power off" slider may appear and the screen may go black, but do not release Sleep/Wake and Home buttons until the Apple logo appears.

If iPhone won't turn on, or the display freezes or doesn't respond

  1. Press and hold the Home button for at least six seconds, until the application you were using quits.
  2. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a 10 seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
  3. If that doesn't work, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears


More resets:

Try This:
1. Remove Sim Card
2. Hold in 'Home' button and 'On/Off' button together until Apple logo appears
3. Replace Sim Card
4. Hold in 'Home' button and 'On/Off' button together until normal phone screen appears.


Also, Try this:
1.) Shut down the iPhone 3G.
2.) Start up iTunes
3.) Hold down HOME button on the iPhone 3G
4.) While keeping the HOME button depressed, plug in the Sync cable
5.) A message will pop up to ask if you want to reset.
6.) Just click YES and the reset process should start.

Dec 12, 2010 | Apple iPhone 3G

2 Answers

Iphone is stuck on apple logo


Download the latest iTunes to your computer and reset the iPhone. Then re-sync it.

Reset


To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds. During this time, a red "power off" slider may appear and the screen may go black, but do not release Sleep/Wake and Home buttons until the Apple logo appears.

If iPhone won't turn on, or the display freezes or doesn't respond

  1. Press and hold the Home button for at least six seconds, until the application you were using quits.
  2. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a 10 seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
  3. If that doesn't work, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears


More resets:

Try This:
1. Remove Sim Card
2. Hold in 'Home' button and 'On/Off' button together until Apple logo appears
3. Replace Sim Card
4. Hold in 'Home' button and 'On/Off' button together until normal phone screen appears.


Also, Try this:
1.) Shut down the iPhone 3G.
2.) Start up iTunes
3.) Hold down HOME button on the iPhone 3G
4.) While keeping the HOME button depressed, plug in the Sync cable
5.) A message will pop up to ask if you want to reset.
6.) Just click YES and the reset process should start.

Nov 30, 2010 | Apple iPhone Smartphone

1 Answer

I phone will turn on screen is locked and so is navigation button


Download the latest iTunes to your computer and reset the iPhone. Then re-sync it.

Reset


To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds. During this time, a red "power off" slider may appear and the screen may go black, but do not release Sleep/Wake and Home buttons until the Apple logo appears.

If iPhone won't turn on, or the display freezes or doesn't respond

  1. Press and hold the Home button for at least six seconds, until the application you were using quits.
  2. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a 10 seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
  3. If that doesn't work, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears


More resets:

Try This:
1. Remove Sim Card
2. Hold in 'Home' button and 'On/Off' button together until Apple logo appears
3. Replace Sim Card
4. Hold in 'Home' button and 'On/Off' button together until normal phone screen appears.


Also, Try this:
1.) Shut down the iPhone 3G.
2.) Start up iTunes
3.) Hold down HOME button on the iPhone 3G
4.) While keeping the HOME button depressed, plug in the Sync cable
5.) A message will pop up to ask if you want to reset.
6.) Just click YES and the reset process should start.

Nov 25, 2010 | Apple iPhone 3G

2 Answers

My phone used to work well. I just turned off my phone and when I opened it there was no signal as well as no carrier menu in settings.I reset my phone it didn't work at all. Any solution


There are 4 different reset to try:


Download the latest iTunes to your computer and reset the iPhone. Then re-sync it.
Reset

To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds. During this time, a red "power off" slider may appear and the screen may go black, but do not release Sleep/Wake and Home buttons until the Apple logo appears.
If iPhone won't turn on, or the display freezes or doesn't respond
  1. Press and hold the Home button for at least six seconds, until the application you were using quits.
  2. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
  3. If that doesn't work, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears

More resets:
Try This:
1. Remove Sim Card
2. Hold in 'Home' button and 'On/Off' button together until Apple logo appears
3. Replace Sim Card
4. Hold in 'Home' button and 'On/Off' button together until normal phone screen appears.


Also, Try this:
1.) Shut down the iPhone 3G.
2.) Start up iTunes
3.) Hold down HOME button on the iPhone 3G
4.) While keeping the HOME button depressed, plug in the Sync cable
5.) A message will pop up to ask if you want to reset.
6.) Just click YES and the reset process should start.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Jun 06, 2009 | Apple iPhone 3G

1 Answer

AOC Monitor says "no signal" and won't wake up!


This monitor refuses to wake up because it cannot find the signal from the computer.

When the light is amber, force the pc to shut down by holding the power button until all lights go off. Then, after about 10 seconds, power the pc back up again.

If this does not start your monitor, unplug all the monitors connections and plug them back in again. These things should reform the connection from the pc to the monitor.

good luck
tony

May 18, 2009 | Computers & Internet

1 Answer

White noise


make sure your power earthing is fine,pins grounding is ok,its normally by grounding problem,check every rhing focus with this suggestion

Mar 04, 2008 | Philips SAA7130 TV Tuner/FM Radio/Video...

1 Answer

Phillips tv


Are you connected using R,G,B (component) cables? Check them to make sure they are in firmly - if so, then try a new set - that may very well fix the rolling issue. (Unless the rolling is caused by poor antenna reception).

Press "Sleep" on the original remote control for this TV if you still have it until the TV says "Sleep OFF".

If no strong TV signal is detected, this unit goes into sleep mode, which may explain Tuner B shutting off after 5 minutes.

Feb 23, 2008 | Philips TV Tuner Video Capture PCI Card -...

Not finding what you are looking for?
Microsoft Windows Vista Ultimate Edition Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2642 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18358 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...