Question about Alpine CDA-9811 CD Player

3 Answers

Setting time on clock

Alpine CDA 9811 will change the hour, but not the minute on the clock. We cannot find the manual, but assume something is wrong.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Press "Title" until time is displayed. Then press and hold "Title" for a few seconds until time is displayed. Turn the silver knob to change the hour, after hour is set, press the silver knob to activate minutes. Turn sliver knob to change minutes. Press silver knob to end.

Posted on Oct 20, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Alpine model cda-9811 cd receiver mp3/wma please help. I don't know how to set my clock and how to set the speaker balance. Could you please help me? ty Ronnie

Posted on Sep 19, 2008

Please list the steps taken to make the time adjustments. This radio has one of the most convulated time setups I've ever seen. I believe that after setting the hour you push in the silver knob to adjust the minutes.

Posted on Jun 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alpine Cd Reciever MP3 WMA CDE-9845 EM How to set Clock


Quickly push the knob in again to get to the minutes then rotate the knob as before to set the minutes. press the knob again to confirm your setting.

Jul 14, 2013 | Alpine CDA-7894 CD Player

2 Answers

Hooking up an ipod


Are you sure you are using the audio input wires and not the audio output wires on the back of this radio. there is also an input switch you need to set before the Ipod will work

Jun 15, 2007 | Alpine CDA-9811 CD Player

1 Answer

Set clock on a alpine cda-9805. I can change hr not min


Heree is how to set the time on the radio.

1 In the Clock priority mode, press and hold the DISP/

TITLE button for at least 3 seconds while the time is

displayed. The time indication will blink.

2 Turn the Rotary encoder to adjust the hours while the

time indication is blinking.

3 When the hour has been adjusted, press the Rotary

encoder.

4 Turn the Rotary encoder to adjust the minutes while

the time indication is blinking. The time is automatically

set 5 seconds after the minute adjustment. The time

can also be manually set by pressing the Rotary
encoder
.

If you need the manual is on the link below page 6 tells you how.

http://a248.e.akamai.net/pix.crutchfield.com/Manuals/500/500CDA9805.PDF

Good Luck

Nov 06, 2010 | Alpine CDA-9805 CD Player

1 Answer

How do you change the time on the clock? Don't


Hi there,
This is from Page 7 of the manual available on Alpine's site:

moz-screenshot-1.pnghttp://vault.alpine-usa.com/products/documents/OM_CDA-9884.PDF


------------------------------------
Setting the Time
-----------------------------------------------
1. Press and hold F/SETUP for at least 2 seconds to activate the SETUP selection mode.

2. Turn the Rotary Encoder to select CLOCK ADJUST,
and then press "magnifying glass"/ENT

3. Turn the Rotary Encoder to set hour.

4. Press "magnifying glass"/ENT

5. Repeat steps 3 and 4 above to set minute.

6. Press and hold F/SETUP for at least 2 seconds to return to normal mode.

------------------------
I hope that helps.

May 21, 2010 | Alpine CDA-9885 CD Player

1 Answer

I cannot figure out how to change the clock! Help please.


From the manual...

Setting Time
1 In the Clock priority mode, press and hold TITLE for at least 2 seconds while the time is displayed. The time indication will blink.

2 Turn the Rotary encoder to adjust the hours while the time indication is blinking.

3 When the hour has been adjusted, press the Rotary encoder.

4 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing the Rotary encoder.

• To synchronize the clock to another clock/watch or radio time announcement, press and hold the Rotary encoder for at least 2 seconds after setting the “hour.” Minutes will reset to 00. If the display shows over “30” minutes when you do this, the time will advance one hour.

Jan 12, 2010 | Alpine CDA-9847 CD Player

1 Answer

Trying to play Ipod through my Alpine cda-9811


you need to set up your system to accept aux. this means you will need to set the 'aux on', as the default setting is 'off'. use the manual and refer to page 23 & 24. please read the instructions carefully, as they are slightly confusing.

Mar 15, 2009 | Alpine CDA-9811 CD Player

2 Answers

Change the time


press and hold clock button for atleast 3 seconds while the time is displayed until time blinks.rotate the mode knob until the hour is correct. press the mode button to adjust your minutes. when done press mode button again to set.

Dec 28, 2008 | Alpine CDA-7863 CD Player

1 Answer

How Can I change Time In my CD Player


Go into settings in from the menu button. using the fowrad and backward keys find the clock setting. The hours should be blinking on the clock. change using the scroll and press the scroll to change to minures. just press menu to return to the menu then go to return. Problem solved.

Nov 28, 2007 | Alpine CDA-9851 CD Player

1 Answer

Tyring to adjust the clock


According to the users manual, which is here;

http://vault.alpine-usa.com/products/documents/OM_CDA-7894.PDF

1) In Clock Priority Mode, press and hold the CLK button for at least 3 seconds while the time is displayed. Time indication will blink.

2) Turn the Rotary Encoder to adjust the hours while the time indication is blinking.

3) When the hour has been adjusted, press the Rotary Encoder.

4) Turn the Rotary Encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds anter the minute adjustment. The time can also be manually set by pressing the Rotary Encoder.



Best of Luck.

Oct 27, 2007 | Alpine CDA-7894 CD Player

Not finding what you are looking for?
Alpine CDA-9811 CD Player Logo

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Tygh Duval
Tygh Duval

Level 2 Expert

290 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Alpine Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...