Question about Foxconn (865G7MC-ES) Motherboard

1 Answer

Need help just bought nvidia e-geforce 7600 gt graphic card want to install it on foxconn 865g7mf motherboard but screen is black need to know how to disable intergrated video adapter dont even know where to start

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

You need to enter your motherboards bios. As the system starts up press the Delete key every two seconds. Hopefully you'll have video doing this. If you do not have video display. You'll have to remove the new video card for a short while. Again enter your bios. Still have your manual? If not click the link & download it here. http://www.foxconnchannel.com/EN-US/support/downloads.aspx?ProductModel=865G7MC-ES&TypeID=en-gb0000001
Enter Advanced Chipset Features
Goto pg. 33
On-Chip VGA (Default: Enabled). Disable this.
Init Display First (Default: Onboard/AGP) Change to AGP/Onboard. The AGP is to load first before the onboard.
Save & shut down the system. Clean out the AGP slot. There can be a dust build up from not using it. Canned air works well.
Leave the side case off untill your sure the 7600 is running correctly.
Get to know your board alittle. Read the manual a wee bit.
Good Luck! Enjoy!
please vote

Posted on Feb 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

UPGRADE of CPU and graphics card in HP Pavillion 9000?


The HP Pavilion dv97072ea Notebook PC?

http://h10025.www1.hp.com/ewfrf/wc/product?product=3308945&lc=en&cc=us&dlc=en&lang=en&cc=us

Nope.
Doesn't use the MXM technology, with using a separate graphics ->adapter card.
The graphics chipset (GPU) is soldered directly to the motherboard. (GPU on a small circuit board, that is)
It's Integrated Graphics,

http://www.ascendtech.us/hp-434659-001-dv9000-laptop-motherboard_i_mbhp434659001lm.aspx

Scroll the page down to the larger photos.

The Nvidia GeForce GO 7600 mobile graphics chipset, is the darker OD green circuit board. (Generally speaking)
In the views you are looking at the TOP of the motherboard.

You see the white rectangular Processor socket, with the square hole in the middle.
Next to it is a green square circuit board, and next to that is the darker, Olive Drab green square circuit board, that is the Nvidia GeForce GO 7600 graphics chipset.
{Circuit board and GPU, is referred to now as the graphics chipset.
That is why I stated - Generally speaking, above }

[GPU,

http://en.wikipedia.org/wiki/GPU ]

You can see the Nvidia GeForce GO7600T chipset, and circuit board, more clearly here,

http://www.ebay.com/itm/100-new-nVIDIA-GeForce-GF-GO7600T-N-B1-GPU-BGA-IC-Chipset-with-Balls-/190698089722?pt=LH_DefaultDomain_0&hash=item2c667decfa

It's mounted to the motherboard with a BGA surface mount.
Ball Grid Array.

To explain the Ball Grid Array surface mount, simply;

In the photo of the chipset in the Ebay link above, you are looking at a green square circuit board, with an Nvidia 7600 GO, mobile graphics chipset, in the middle. You are looking at a TOP view.

http://en.wikipedia.org/wiki/Comparison_of_Nvidia_graphics_processing_units#GeForce_Go_7_.28Go_7xxx.29_series

The GPU ->Nvidia GeForce GO 7600, is mounted to the green circuit board.
The bottom of the green circuit board has Solder Balls.

The Solder Balls take the place of Contact Pins.
(Contact pins, such as on the bottom of an Intel Pentium 4 processor, that uses a Socket 478 processor socket)

On the motherboard are matching Copper Pads.
(The copper pads are coated with a gold plating)

The Nvidia graphics chipset is set down on the motherboard, with the Solder Balls lining up on the matching Copper Pads.
Heat is then applied at a specific temperature, and length of time.

This action makes the solder balls melt, and solders the Nvidia GeForce GO 7600 to the copper pads.
(Which in turn solders it to the motherboard)

This demonstration of a BGA Rework Station, shows you more about the above technique,

http://www.ersa.com/art-ir-pl-650-346-1472.html

Go down towards the bottom of the page, and click on the Red -
Take a few minutes to view the IR 650 demo video. (5 minutes)

Just for edification;
If it indeed did use the MXM technology, and a graphics adapter card for a laptop, that is based on the Nvidia GeForce GO7600 GPU, it would look like this, and plug into an interface, (Connector) on the motherboard,

http://www.ebay.com/itm/nVIDIA-GeForce-Go7600-Go7600-N-A2-G73M-DD2-256MB-MXM-II-VGA-Card-35G1P5310-10-/330758557353?pt=PCC_Video_TV_Cards&hash=item4d02bf0ea9

(There is also a model with 128MB of graphics memory, besides the 256MB model shown above)

More in a Comment. Don't give up on increasing graphics 'power', just yet............................

Jul 07, 2012 | Computers & Internet

1 Answer

I have a hp iq780 touchsmart pc.recently nvidia 7600 graphic card got crashed & its display got corrupted so, i switched to the motherboard graphic card nvidia 6100.wanted help in recovering 7600...


if the hw is working fine then you can go to the device manager and uninstall the driver ... and then go to the nvidia website and install the driver sw for it

Mar 17, 2010 | HP TouchSmart IQ770 PC Desktop

1 Answer

How do I add a second nvidia geforce 7600 gt card to my ASUS A8N-E Motherboard


There is only one slot for your video card but you can get dual power of graphics by adding Nvidia Geforce 9800 gtx2 card.

Oct 20, 2009 | Computers & Internet

1 Answer

Black and white colour on tv


Hi there. Try running the multiple display wizard in the Nvidia control panel.

Hope that helps

Tim

Apr 17, 2009 | Evga e-GeForce® 7600 GTS, (256 MB) PCI...

1 Answer

Needing to know what graphics cards I can get with my motherboard


I can not find it supporting that model but from what I have found it will support a NVIDIA GeForce 7800.

Jan 03, 2009 | Foxconn VGA FOXCONN 8500GT-512 R PCI...

1 Answer

Graphics card problem


I have the 9600 GT - great card. You have to plug a 6 pin power supply directly into card (on the right hand side when it's installed), it can go AGP or PCI express, but PCI is better. Also NVidia released a new driver for it yesterday (nov 20th) which fixed some bugs in mine (dreamscene WAS a problem for the old drivers), so get that from the Nvidia site- support tab (driver is version 180.48). Also, if the card is allowing you OS to boot it should be fine (if no boot, you prob need to get newer mobo). Uninstall your old drivers, run a reg cleaner, driver cleaner, manually delete c:\nvidia, non-windows defrag and chdsk.....If thats no help to you then I suggest you directly ask beni-muer or world-vet, they are absolutely 1000 more times knowledgable than me when it comes to these probs.. GOOD LUCK.

Nov 21, 2008 | Foxconn 6627MA-RS2H Motherboard

1 Answer

Graphics Card


dear Arif,
yes it can.

Regards

Sep 15, 2008 | Foxconn 915GV7MH-S Motherboard

1 Answer

GeForce 8800 GT graphics card no display


what motherboard do you have it maybe your motherboard is only up to PCI-E 8 and the card is PCI-E 16 if it is it will not work

Jul 31, 2008 | OCZ GeForce 8800 GTX, (768 MB) Graphic...

2 Answers

Upgrade vga version to 7


You can get all your drivers from Foxconn, click the link below.
http://www.foxconnchannel.com/support/downloads.aspx?ProductModel=865G7MF-SH&TypeID=en-us0000004

Feel free to ask if you need more help.

Good Luck!
Have a great day.

Mar 14, 2008 | Foxconn 865G7MF-SH Motherboard

1 Answer

Is my Motherboard compatible?


Try to find out what the AGP voltage is on the motherboard.
Some graphics cards use 1.5 volts and some use 3.
If it's a 1.5 volt AGP slot and you plug a 3 volt graphics card in, it either wont work or you could permanantly damage both card and motherboard.

Mar 07, 2008 | Computers & Internet

Not finding what you are looking for?
Foxconn (865G7MC-ES) Motherboard Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Foxconn Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

David
David

Level 3 Expert

778 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

Are you a Foxconn Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...