Blue film partly removed

Maytag mvp v microwave door handle parts Questions ...

www.fixya.com > Forum > Tags > mvp v microwave door handle parts

Maytag mvp v microwave door handle parts related problems. Ask your Maytag mvp v... The handle on my maytag microwave oven broke off ... door handle ...

Maytag Microwave Handle Parts from RepairClinic.com

www.repairclinic.com/Shop-For-Parts/.../Maytag-Microwave-Handle-Par...

Shop for your Maytag Microwave Handle from our huge inventory. Return any part for any ... Repair Help for Microwaves .... Microwave Oven Door Handle.

CMV1000ADW Maytag Microwave Parts and Repair Help

www.partselect.com/Models/CMV1000ADW/

Paul, if you look on top of the microwave before you install it you will see where the fan is located at the back edge. There should be 2-4 screws that hold it in place. Remove the screws and pull the fan up and out of the microwave and rotate the unit 90 degrees towards the front of the microwave and put it back in and replace the screws. That should be all that you have to do to get it to vent out the front.

You didn't mention your brand or model, so I'll have to throw out a few links. Hopefully one will work for you.

You can download GE owner's manuals and installation instructions here.

You can download Maytag, Kitchenaid, and Whirlpool owner's manuals and installation instructions here.

You can download Frigidaire owner's manuals and installation instructions here.

You can download Samsung over the range microwave installation instructions here.

For Kenmore, you can download many installation instructions from the Sears Parts Direct site.

See the blue button after you enter your full model number.



Many L.G. / Goldstar owner's manuals can be downloaded here.

Hope yours is in these.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Normally the internal part of the door is not cleaned as there is a film stuck over the inside of the door stopping food and steam from entering the inside parts.

The blue film is supposed to be removed. It is used only to protect the appliance from scratches during shipping. Some consumers mistakenly leave this film on thinking it will make the appliance last longer. Eventually, over years of use, the film becomes difficult to remove and may remove the finish if you try to peel it off. It is not required for the safe use of the microwave oven.

The silver tab is the neutral which is Blue.
The copper tab is hot and is connected to the White wire.

European convention dictates that Blue is always Neutral.

Have a nice day

bought a new microwave;

your part number is 53001039.
Here is the picture
and it is in stock here (use coupon "New10" for 10% off)

As far as I can tell you need to remove the grille on top to get to the screw on top of the control panel/overlay assembly. The grille is usually held by 3 screws on top or in front of the grille.

it may be the oil/paste out of the h.v. capacitor in the unit,if thats what it is,soon it will dry out and overheat the cap and blow the internal ceramic fuse,i'd for sure find out if this is the problem cause it won't go away

A bad keypad may be worn out due to age, damaged, or it may have gotten wet or otherwise contaminated. Moisture and contamination can be caused by not using the hood fan when boiling on the stove top, spraying of cleaners, by storing the microwave in an unheated garage or shed, or infestation. I warn my customers to never spray cleaner directly onto the microwave keypad, since the liquid can get inside and "lock up" or even ruin the keypad or controller. Apply an alcohol-based cleaner (such as the purple kind) to a cloth (since paper towels can scratch) and gently wipe it off. I suggest to my customers that they NEVER use any ammonia-based cleaner (like the blue stuff) on a microwave, since the ammonia will crack and distort polycarbonate plastics. If you or a friend decide to work on it, we have *critical* safety and disassembly info at our site, which is linked at our listing here on FixYa: http://tinyurl.com/yzjozk You can find helpful exploded view diagrams and order parts by entering your base model number (without the suffix) here: http://tinyurl.com/gv383