Question about Washing Machines

1 Answer

Asko Front Load Washer major water overflow from powder dispenser

I have an Asko Front Load Washing machine and water has started flowing out of the powder/softener dispenser.

Posted by on

  • 1 more comment 
  • gdp6062 Feb 15, 2008

    Thanks Master_Tech - seems to be the problem.

    Cheers

  • Gary Davd
    Gary Davd May 11, 2010

    you most likely have a stuck solenoid in the dispenser. check that and let me know

  • Helen
    Helen Aug 10, 2014

    I have the same issue, but there isn't a solenoid in the dispenser.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

You may have the hose between the dispenser and bowl blocked

Posted on Feb 15, 2008

  • Helen
    Helen Aug 10, 2014

    Hmm - the hose feeds the washing machine, and it does fill.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix leak from soap dispensor


I assume you have water coming out of the dispenser and running down the front of the machine. You probably have a build up of soap powder in the water inlet and it is restricting the flow and backing up.
Soap powder is only partially soluble in cold water and a residue of undissolved powder builds up over time, one of the reasons I use a liquid detergent. Remove the dispenser tray, it should pull out fairly easily with just a little resistance. Try and clear any blockages, hot water is best as it dissolves better. Clean the tray you have removed and re-assemble.

Dec 07, 2015 | Maytag MAH6700AWW Neptune Front-Load...

1 Answer

Front load washer dispenses fabric softener drawer fills water


either the auto dispenser is sticking , take out and clean with hot water. Or flow control valve needs replacing.

Feb 24, 2014 | Bosch Washing Machines

2 Answers

Should I put powder detergent in the tray or in the drum in my Asko front load washer?


But the powder in the tray. I have a asko washer myself
You should to able to go on line and download your manual
Go to Asko.com Good Luck

Feb 12, 2013 | Asko W6461 Front Load Washer

1 Answer

My hotpoint few12 is emptying through top where you put powder But it is spinging ,Whats wrong with it


I think what was meant is that the water seems to overflow from the top side and so washes off the powder. This can be due to a improper setting or fault on the water level controller unit as it fails to detect and stop the water flows at a lower level.

Sep 29, 2011 | Hotpoint First Edition FEW12 Front Load...

1 Answer

Machine overflows from front (powder compartment) on starting; cannot appear to clear flow pipe into machine -tried vinegar solution


Pour a jug of water in the soap tray and make sure it goes away fairly easy indicating the tray or hose to drum is not blocked, if flows okay try reducing water pressure to machine only .....

Feb 16, 2011 | Hoover PE235 Front Load Washer

1 Answer

Oxiclean


Mix one ounce OxiClean powder with your powdered detergent in the detergent dispenser of your front loading washing machine.

OR

Dump one ounce OxiClean powder into the washing machine before you add clothes.

May 15, 2010 | Kenmore Front Load Washer

2 Answers

Water overflowing from dispenser, no error codes


check the holes of the dispenser, could be clogged with soap and liquid detergent. check the hose where the dispenser flows to the drum, it could be clogged also. open the door, trace the dispenser hose that is attached to the drum or to the big rubber gasket at the front. check and see if there is dirt accumulation or soap clogging the hole.

tnx 4 using fixya,

drcool

Oct 14, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Amana Front Load Washer Soap Dispenser


I suggest you use soap powder for 'front loading washing machines'. The cartons at the market have them specially marked.

Feb 28, 2008 | GE WSXH208A Front Load Washer

1 Answer

Leaking from the dispenser


Try to pull out your dispenser drawer gently to clean out thoroughy. If you cant succeed, use a tooth brush, see that the brush does not fall in. Probably you have dried powder blocking the passage, nothing else.

Rate me pl.

Nov 12, 2007 | Whirlpool LHW0050PQ Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Brad Brown

Level 3 Expert

15133 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...