Question about Printers & Copiers

1 Answer

US2 CYCLE POWER - Xerox DocuColor 4 cp

This Problem is:

US2 CYCLE POWER

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 53 Answers

US2 isn't in my little black book....could you have mis-read it ?
U2/- on all Xerox machines refers to scan function.Usually the scan lamp is obstructed or tight for some reason, take the glass off and gently move the scan assembly across and back . OK? check if position sensors are not knocked out of position OK?
Does the carriage move at all at switch on?
These questions are only relevant to U2 codes so if different we need more info to be able to help

Posted on Feb 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xerox docucolor 252


http://www.support.xerox.com/support/docucolor-242-252-260/support/enus.html?associatedProduct=dc242-252-260-built-in-controller


Replace any new toner you put in the machine and shut it down for 2 min then power back on. If that doesn't fix it you will have to call Xerox service to replace a sensor that may be broken.

Jan 03, 2014 | Xerox Printers & Copiers

1 Answer

When i print one document on my xerox docu color 4lp on the printer display's this message "U6-4 Cycle power"


U6-4 sounds like an NVRAM error and could be a bad board.

I think they probably be the Main System Controller Board 160K58571 or the Engine Controller/MCU 160K60530
Whit
Item, Inc.

Aug 10, 2010 | Xerox DocuColor 4LP Laser Printer

2 Answers

Xerox docucolor 1632 fault code: 004-341 the printer doesn't print at all


Try reseating the waste toner then all 4 drums, see if the chips are mating.
Most likely either the machine software is corrupted and needs to be reloaded, or the MCU board has failed, could also be a bad laser, called the ROS.

Jan 02, 2010 | Xerox DocuColor 1632 Laser Printer

2 Answers

Xerox DC 3535 error 116-332


Simultaneously press and hold the 1,the Stop
and the Power Save buttons on the Control
Panel,if problem continues repeat the same
with
6,the Stop and the Power Save buttons
4,the Stop and the Power Save buttons
3,the Stop and the Power Save buttons

Aug 28, 2009 | Xerox DocuColor 3535 Copier

2 Answers

Error Code 10-399


Hello sir; The problem you have can be reset, just follow the steps as below;
1, power on the machine.
2, while hold down the 0 key, press start.
3, enter the access number 6789
4, click onNVM reset/NVM initialization.
5, enter 777-018 press start.
if still have problem let me know

Jan 02, 2009 | Xerox DocuColor 12 Color Copier

1 Answer

Docucolor 12 Problem


You can find the POWER SUPPLY box at the bottom right corner on the right side of DC12. 

Dec 28, 2008 | Xerox DocuColor 12 Color Copier

1 Answer

Error code 14-372 after power on


Chain 14 has to do with the scanner not passing self test, not comming to ready.
CCD Module, exposure lamp or one of the scanner baords.

Jan 03, 2008 | Xerox DocuColor 12 Printer

3 Answers

Xerox Docucolor 2006 Error Code 009-358


Solution Listing for Symptom The Printer's Control Panel Displays 009-358 - Contact Service Solution (try these steps in order) 1. Turn the printer off, wait 30 seconds and turn the power back on 2. The printer will need to be repaired power off the printer and contact service Not good news I am sorry to say. http://office.support.xerox.com/srvs/cgi-bin/webcgi.cgi?new,ques=User_Type:4,templateset=xo_legacy,kb=out98pkb,ques=obj(69892)::obj(707),ques=obj(34668)::obj(67237),Company={5AC8CA72-62D5-4658-8D6F-D2F393C98A63},varset=prod:2006 http://www.office.xerox.com/multifunction-printer/color-multifunction/docucolor-2006/sprt-enus.html Good luck, Tim

Mar 15, 2007 | Xerox DocuColor 2006DPC Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...