Question about Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

2 Answers

Dyson DC07 My Dyson DC07 vacuum sounds very very loud, it works fine but it's gone from a quiet vacuum to a loud vacuum cleaner, what can I do to make it quiet again?

Posted by on

  • pjh20165 Feb 17, 2008

    dyson animal upright, sounds louder than usual. What's wrong?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Your better bar is miss alined put a felt tab (for chair legs thier sticky) on the side if the bar near the belt on the inside end re put in the better bar no more noise

Posted on Feb 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers

First, check all of the ports, there are various covers you can take off to see if there is a clog, also check the hose for a clog. Make sure all filters are clean out. The worse case would be a motor problem.

Posted on Feb 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loud humming dyson DC07


Hi Phil,

I apologize for our delayed response. I am sorry to hear you are experiencing an unusual noise when you initially run your DC07. Based on the details you provided we would appreciate the opportunity to trouble shoot with you over the phone so we can also hear the noise to better determine next steps.

At your earliest convenience, please call us directly at 0800 298 0298 (UK) or 1-866-693-9766 (UK). We look forward to speaking with you.

Best wishes,

Jessica

Nov 28, 2012 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Floor suction not working but pipe fine


Hi Ann,

I'm sorry to hear this - your DC07 has suction through the wand, but not from the cleaner head, it sounds as if there may be a blockage in the cleaner head. The easiest way to check for this is to follow the steps shown in our online support guide:

http://www.dyson.co.uk/support/help.asp?article=4&product=DC07-SY

This should resolve your issue, but if you'd like further assistance, give us a call free on 0800 298 0298 (UK), or 1866MYDYSON (US) so we can help.

Kind regards,

Jack
Dyson Online Customer Support

Oct 28, 2011 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Dyson dc07 makes loud vibrating loud noise


Hi there,

Sorry to hear about the problem you're having with your DC07. Your cleaner is equipped with a safety feature which makes a ratchet noise if the brushbar gets jammed, to warn you to clear the obstruction.

For help checking for and clearing obstructions, you may find it useful to visit www.dyson.com and click on 'Support'. This step-by-step illustrated guide shows you the easiest way to clear the brushbar:

http://www.dyson.com/support/help.asp?article=5&product=DC07-SY-HEPA_US

If you've followed this walkthrough and your DC07 is still making a ratcheting noise, please get in touch with us free on 08002980298 (UK), or 1866MYDYSON (US). One of our experts will be happy to provide you with the assistance you need.

Kind regards,

Jack
Dyson Customer Service

Jul 25, 2011 | Dyson DC07 Bagless Upright Cyclonic Vacuum

2 Answers

Stops working after about 5 minutes. leave for 20 and it starts again for a while.


Sounds like your motor has had it, Its probably ruined your Post filter too.

If you visit http://www.sparesaver.com/help-and-support/dyson-section/dyson-technical-advice-450/ they have alot of info on repairing dyson cleaners AND they sell the parts, cheapest ive seen online.

Hope that helps

Jul 05, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Vacuum will not stay on unless I hold down the power button.


Sounds like your switch has gone.

Its simple to replace, only 1 "specialist" tool is needed, but you can substitute for a small screwdriver.

If you visit http://www.sparesaver.com/help-and-support/dyson-section/dyson-technical-advice-450/ they have alot of info on repairing dyson cleaners AND they sell the parts, cheapest ive seen online.

Hope that helps

Jun 27, 2010 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

My dyson hoover keeps cutting out and smells of burning i cant see any obvious blockages does this mean the motor has gone


Hi, It definitely sounds like the motor is toasted.

If you visit http://www.sparesaver.com/help-and-support/dyson-section/dyson-technical-advice-450/ they have alot of info on repairing dyson cleaners AND they sell the parts, cheapest ive seen online.

Hope that helps

Jun 10, 2010 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Dyson upright vacuum cleaner makes horrendous noise


It might be a simple as changing the clutch belt and the drive belt and cleaning out the brush roll. You can get replacement belts here:

Dyson DC07 Belts

Dec 08, 2009 | Dyson DC07 All Floors Bagless Upright...

1 Answer

My dyson turns on only when in the tilted


it sounds like the wires attached 2 the moter are lose need hex drive 2 take a part moters verry fidley stripped quiet a few moters were gone

Oct 20, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

My dyson cyclone assembly will not spin when it picks up dirt.


http://geeksquad.fixya.com/ThreadView.aspx?prdid=34171&thid=680773
My dyson cyclone assembly will not spin when it...
Posted by littleladysc on Jun 18, 2008
I have 2 dyson dc07. The cyclone assembly will not spin when dirt is picked up, but when I change them out the vacuum is fine, so I know it is the cyclone assembly. Any suggestions? Thanks!


Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Dyson DC07 Bagless Upright Cyclonic Vacuum.

It sounds to me that you may have a clog but when you said you changed them out the vacuum is fine, so a couple of things, if the vacuum is still under a factory warranty of 1 or 2 years the cyclone assm still would be under a factory warranty. If it is over the 1 or 2 years then you would have to replace the cyclone assm but you may want to check with the Dyson Factory Tech Support / customer Service line as per the problem, and they can ship you the part from the factory or to check with your local vacuum cleaner dealer in your area and they may have one in stock or they can order one for you. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.dyson.com/
Dyson Inc. 600 W. Chicago Suite 275 Chicago, Illinois 60610
Customer Service 1-866-693-9766 questions@dyson.com
http://www.a-1vacuum.com/ 1-800-657-1874 Customer Service
Thanks, Don the Vac Man
Go Ahead. Use Us.


Jun 18, 2008 | Dyson DC07 Bagless Upright Cyclonic Vacuum

Not finding what you are looking for?
Dyson DC07 Animal Bagless Upright Cyclonic Vacuum Logo

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...