Question about Computers & Internet

2 Answers

Acer notebook not working

Acer Aspire 1680: powers on, monitor remains unlit, no beeps or sounds, the power LED flash continuously orange.When i connect the a/c coord or the batery the fan starts and flash the light. When i unplugged the notebook power led stay green if there is batery on.Can anybody help me? any other ideas on what might have happened, is there any solution im unaware of that can resuscitate my machine? Thanks

Posted by on

  • AdyS Feb 14, 2008

    Batery or A/C conected =same symptoms! i tried to change RAM - nothing! Thanks

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 406 Answers

Remove battery connect power(A/C) then system should work. If not change RAM display should come.

Regards
rafique

Posted on Feb 14, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Change ur battery n c.. i think ur battery is dead.. nt sure

Posted on Feb 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I need a wiring diagram for an acer aspire m1610. I replaced the motherboard and now it powers on but the button doesnt power it off and im getting no signal to my screen, plz help


Doesnt power off:
I think your front-panel cables arent connected properly. (the picture might be wrong, because not all front-panels are the same)

dj_skywalker_2.jpg

No video signal:

The problem isn't with your monitor, it's wth your video card, motherboard, CPU or power supply. Do you get the single beep at startup?

Jun 28, 2011 | Intel Motherboard

1 Answer

My screen is not working although the computer turns on with all the lights


When you
When you power up your computer and the monitor screen remains dark, the problem can be either be associated with your monitor, or your computer power supply/video card/motherboard or CPU. Perform the following tests to isolate the problem to either the monitor or the computer.
1. Turn off you PC and monitor. Then verify that the 15 pin video data cable connectors are fully inserted into their receptacles on the rear of your PC and on the rear of the monitor and they are tightened down. (on some monitors the data cable is hard-wired to the monitor). Then make sure that both your monitor power cable is securely plugged into a working AC power receptacle. (You can temporarily plug a lamp into your AC power receptacle to make sure you have a good source of AC power).
3. Turn on the power switch on your monitor. The amber colored LED on your monitor should come on. Then turn on your PC. The fans in your PC start to run and continue to run and the LED on your monitor should change from amber to green.
???
Now if the monitor led remains amber and the screen stays dark you either have a bad monitor or a problem with your video card, motherboard or processor.. Try using a different monitor. If that doesn't solve the problem, you need to have a PC technician test your computer.
If you have any additional questions contact me by clicking on the "Add a comment" link located under your problem description on FixYa. Also, if you believe that this information was helpful to you, please return to the FixYa website and rate my response to your question.
Best regards,
Yavacotech

Jan 23, 2011 | Computers & Internet

1 Answer

No display


This issue can be caused by any of the below possibilities.

  1. Monitor is not on
  2. Computer is asleep
  3. Connections not connected properly.
  4. Monitor settings are not correct.
  5. No Post.
  6. Hardware issue.
Solution: The following is monitor troubleshooting. If your monitor receives a proper display until it gets into Windows 3.x, Windows 95, Windows 98, Windows NT, Windows 2000, Windows ME, or Windows XP please refer to document CH000192.

Monitor is not on

Make sure the monitor is on. If no power light (green or orange light) is seen on the monitor display try pressing the power button until it comes on. If no light comes on after several attempts continue to below connections not connected properly.

Computer is asleep

If your computer monitor was on and you stepped away from the computer and upon returning it was black it's likely that the computer is asleep. Try moving your mouse, clicking the mouse buttons, and/or pressing any key (space bar) on the keyboard to wake it up.

Connections not connected properly

vga.jpgMake sure that you are connecting the monitor to the back of the computer in the 15-pin connector as shown to the right or older computer 9-pin connection.

If the computer is properly plugged in, make sure it's getting getting power.

If you are not receiving power from a known working wall outlet and if the power cord is removable, replace it with the one connected to the computer and attempt to power on the monitor again. If the monitor still does not get power or it is not removable, it is recommended that the monitor be replaced or serviced at a local TV / Computer repair shop.

If the monitor is receiving power, check the status light.

If the light is orange or flashing ensure that the monitor is not in a suspend mode by moving the mouse or pressing a key on the keyboard. If the computer does not get a display by moving the mouse or touching the keyboard, turn off the computer and monitor and reconnect the data cable from the back of the computer, and if removable, the back of the monitor. Turn the computer back on; if you still encounter the same issue, continue reading through the other possibilities.

Monitor settings are not correct

Ensure that the brightness and contrast is turned up or attempt to adjust the brightness and contrast. If adjusting the brightness or contrast has no affect on the monitor continue reading through the other possibilities.

No Post

Does the computer beep when it is powered on and/or does it appear that the computer has activity? If the computer does not beep or beeps abnormally it is possible that the computer itself is experiencing a hardware issue or is exhibiting a No Post.

Steps on troubleshooting an irregular POST or no beeps can be found on document CH000607.

Hardware Issue

If you have followed the above recommendations and are still encountering the same issue, it is likely that the computer may have either a bad video card or monitor. The best method of determining this is to do one or both of the following

  • Disconnect your monitor and attempt to connect it to another computer. This can be a friend or family's computer and/or it can be taken to a service center.
  • Borrow a computer monitor and connect it to your computer. This will not harm the other computer monitor in any way.

If your monitor works on another computer it is safe to assume that the video card or potentially the motherboard within the computer is bad. Steps in troubleshooting a video card can be found on document CH001028.

Nov 26, 2010 | ASUS P4S333 Motherboard

1 Answer

Pc used to work fine but now won't boot, post or beep. No sounds at all, just a black screen and monitor lamp stays on orange!


Hi,
Check the mains power supply cable. Try to Connect with another cable. Or, the SMPS power supply unit may be at fault.

Jun 24, 2009 | Biostar P4VMA-M Motherboard

3 Answers

Hello sir,my laptop is acer aspire 7520 no charging,no run on main,run on battry only,laptop power adaptor led is damage,


this could be due to the fault in the ac adapter,please try swapping another adapter if it works then you need to replace your adapter.

Jun 20, 2009 | Acer (ACERMOTHERBOARD)

1 Answer

Intel Desktop D845PEBT2 could not boot up


Hi,

i,d suggest that the power cut may have been a surge or spike.

This May have blown your power pack, and caused possible motherboard Damage.

** Did you use the same lead for the PSU** and have you checked the (main fuse in the Plug ? )
If the monitor light remains orange, this is a possible graphics card fault, or driver that is not allowing the monitor to come out of standby mode. You could try installing a different graphics card, or swapping the monitor cable to the on-board graphics card if it has 1.
If none of the above works, assume the motherboard has suffered damage.

Mike @ Compurepair.



Jun 12, 2009 | Intel Desktop Board D845PEBT2 Motherboard

2 Answers

MY COMPUTER COULD NO LONGER BOOT UP AFTER POWER FLUCTUATION


Check the power supply, sounds like it isn't getting enough electricity out the the PC components.

Jun 09, 2009 | Intel D845PEBT2 Motherboard

2 Answers

No Beep No Display


motherboard problem motherboard can't display when switch on, the cpu fan faster no beeping . I had change power supply, but same.Check the keyboard LED,Not flash.I had remove the ram but can't hear beep. PC speaker ok conferm. Monitor display tested monitor its ok . But no comming display. Can you help me? How i can solve this problem?

Jul 03, 2008 | Intel Motherboard

1 Answer

Continous Beeping sound


Hi neosw,

Could you provide a little more detail?

Was this a previously working set-up or is this a new build?

If this was a previously working set-up have you changed anything?

When you switch on the PC
  • do you see anything on the screen, does the monitor remain in standby?
  • are any of the fans running?
  • does the hard drive spin up?
  • does the beeping sound stop after a short while?
The reason I ask these questions is because a continues beeping usually means that the BIOS is not seeing the processor, or that the power to the processor is not correct. With some BIOS manufactures it can also mean the processor clock speed is not set
correctly.

Please don't take this the wrong way but...if you provide greater detail in your question, the easier it for us to diagnose your problem, otherwise we can only make educated guesses.

I hope this has been of some help.

Regards,

Spare head 2

Jan 06, 2008 | Soltek SL-K8AN2E (SL-K8AN2E-GR)...

2 Answers

Presario SR1030AN Turning on but not booting or POST or no any beep at all.


Have you tried switching the power supply out with one that is known good?

Nov 26, 2007 | ASUS A7V8X Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

415 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98796 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...