Question about Televison & Video

1 Answer

Remote control i lost programming from my remote to my tv how do I re-program it back. i do not have the instructing when i bought the tv from my brother it was already programmed.. and worke dfine for aliitle while and for some reason unknown, it has lost its programming, and my brother is unreachable. What do I do?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 778 Answers

My suggestion is to post the manufacturers name & model number of your remote, or search for the manufacturers support website > look for your model of remote > view/down load the instructions and code list for your universal remote. With the manual and manufacturers code list you shouldn't have a problem re programming it.
If it's not a universal? Then remove the batteries for a minute or two, then replace them and that should reset your OEM remote to the default settings, which hopefully will get it to work for you again.
Good luck

Posted on Feb 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a replacement remote for my Toshba tv. How do I program it to my TV?


Brand? just bought? should have instructions. Should have a code sheet for your Tv. Take it back to the store and ask them for the instructions and a little instruction!

Feb 27, 2015 | Toshiba Ct9945 Remote Control

1 Answer

I bought a 3-in-one remote control #15-2147 but I lost the instructions how can i program my tv jvc without the manual


need the code number to program an old sharp portable tv to the radio shack 3-in-one remote control

Sep 25, 2009 | Radio Shack (15-2147) Remote Control

2 Answers

Need to know "HOW TO" set up RCR312W


You have to hold the component button (TV) and enter the code from http://www.rca.com/codefinder. The SKU it asks for, on my RCR312W, was under the lid from the batteries. Hope it helps.

Feb 15, 2009 | RCA Universal Remote Control

2 Answers

Programming my remote


Here is a link for the generic programing instructions for the RCA universal remotes. Scroll down the page for a list of device codes.
Let me know if this is what you were looking for.
http://www.thompsontv.com/rcarc.html

Dec 28, 2008 | RCA RCR311B Remote Control

1 Answer

Programing help


I have a oneforall remote for my 25" Emerson TV I lost the programing instructions. Can you help me program it?

Aug 25, 2008 | RCA DIRECTV Satellite Remote Control

1 Answer

PROGRAMING MY MAGNAVOX UNIVERSAL REMOTE CONTROL


http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

Jun 18, 2008 | Philips Magnavox Learning Universal Remote

6 Answers

I have a one for all remote and lost the how to program instructions


I have lost the directions to program my Zenith TV with the All in One Remote I bought, please help me. Thank you.

Dec 10, 2007 | One For All URC-3021 Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69570 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6355 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...